worms

Concordo con pigr8. Già fatto in passato senza nessun problema

Ok, solved. I need to do a clean install, not a migration. On Microserver g8 used sataportmap=1

I relaly can't made it work. I used this serial generator https://xpenology.github.io/serial_gene ... r_new.html Use MAC Address 001132d80976 and didn't work. What i'm missing abount? I can see the interface only selecting "reinstall" but no activity on normal boot

Oh, I came from quicknick 6.0.2 and it was fine. Could you share your grub.cfg? I can't make it working.. maybe the sataportmap? I tried 1, 4,44,422,42. But when I put in "reinstall" he work.

I'm the only one that can't upgrade from quicknik to this? And I'm on baremetal Microserver G8

Tried but dont work. If I didn't do wrong, this is dmesg output http://pastebin.com/tLVHCV6W I'm on quicknick loader

Thanks a lot for helping me, sorry for my bad english. I'll try with image Network config Step1 Step2 - Volume selection Step3 - LAN selection Step3.1 - First warning Step3.2 - The ERROR If I select the second NIC I'll get the same error. Both NIC are connected to the same router, with 2 different IP (like u can see) What can be? I need to have 2 working Synology?

Didn't work It can't create the cluster. I say YES and he reply "Can't create the cluster"

Yeah, Lan 1 is 192.168.1.5 255.255.255.0 192.168.1.1 Lan 2 is 192.168.1.8 255.255.255.0 192.168.1.1 What I need to do?

Hi guys, I have a working Microserver G8 with DSM 6.0.2 u9 Last day I have try to activate and setup Virtual DSM Manager but I can't arrive at the end of first setup. It ask to me to manage network connection and create a cluster (I have 2 ethernet connection with both static ip). When I say "yes" he said that "can't create..." (I don't remember the message). Anyone are using this system to virtualize anythings? Thanks in advance.

Io alla fine ho preso un MicroServer Gen8 base (Celeron, 2GB ram) P/N: 712317-421 A poco meno di 430€ da un venditore di Amazon. Dopo circa una settimana di test devo dire che la configurazione base si comporta bene, consuma poco (40W con 2x2TB) e non fa rumore. Anche se in ogni caso sconsiglio di mantenerlo in camera 24/7.

Inoltre meglio virtualizzare con esxi o installare direttamente ??

Perfetto, allora prendo il Gen8 soprattutto perchè poi ho intenzione di integrare alcuni servizi ed usarlo come iscsi

Buongiorno ragazzi, Sono approdato qua perchè sto cercando una valida alternativa ad un NAS Synology, attualmente ho un pc con windows che mi fa tutto e stavo pensando di passare ad un microserver con windows+linux virtualizzati, ma poi ho scoperto sta cosa eccezionale! Però sono indeciso, conviene comprare un N40L/N54L o meglio buttarsi sui nuovi Gen8? Chiedo perchè un N40L con 8GB costa circa 150€ e un Gen8 base con 2GB e il Celeron G1610T circa 250€. Sicuramente è più rodato, ci sono più guide e tutto.. Il dubbio nasce proprio dalle maggiori performance della nuova generazione.