Jump to content
XPEnology Community

Vodka2014

Member
 View Profile  See their activity

  • Posts

    339

  • Joined

  • Last visited

  • Days Won

    5

 Content Type 

Everything posted by Vodka2014

  1. Vodka2014
    Hi @Peter Suh UPDATE: So I have I found the issue I think. It might be down to hardware. HBA's - LSI-9211-4i & HP H220 8 Port. Tests: HBA & SATA Disks = Working HBA & SATA + SAS Disks = Rebuild Array / On reboot Broken HBA & SATA + SAS Disks =Disk Crashed - Added New SAS - Working BUT Did not Rebuild SATA - Back to Onboard = Working - DSM Re-Install & All Data There Test 2: HBA + SAS Disks - Working - This is on newer hardware. So yes this seems to be a hardware limitation and anything that is to old will not work it seems with the newer SAS Disks i might need to try and get 6GB/s ones but not sure might just stick with SATA to be safe since this is working on all builds so far. This is just my view. Thanks again
  2. Vodka2014
    Issue SOLVED Re-Installed Latest M-Shell
  3. Vodka2014
    Thanks again for all the help and support with everything I really appreciate everything. My Card is an SFF-8087 to mini SAS 36 to 4 SATA Cables I got mine on ebay
  4. Vodka2014
    Hi @Peter Suh Should i try and move to DS918+ or just stay where i am and wait for the module to get fixed ? Thanks
  5. Vodka2014
    Hi @Peter Suh @wjz304 So something interesting now. I rebuilt the Loader and use the settings of only "SasIdxMap": "0" and let all else blank. Rebooted pressed J and then it asked me to install, I added the .pat got an error then it asked me to recover. So i did and rebooted. Now i am back in my NAS BUT the SAS Disk is now showing as Crashed when it was working and it is an brand new disk so i am not sure what is going on. Also the Disks Serial Numbers and Firmware are showing as on now when before it was not. I wonder if the 16TB Exos Seagate SAS Drives have issues with DSM. Should i rebuild again with an SAS Disk or rather just go with SATA as now my Storage Pool is Degraded.
  6. Vodka2014
    Hi @Peter Suh So i do not have that Storage Boot Options at all on my microserver. The Boot Mode is Legacy and not UEFI SATA Controller is AHCI All 4 Disks show on the HBA in post
  7. Vodka2014
    Hi @Peter Suh I will do some checking on my system for the Storage Boot Option in a few hours again for you. Is there anything else i need to do or change in the loader and see what happens. I take it make some changes and Press J and see if the disks load based again. I will rebuild my loader as well again to be 100% sure on all of this. There is any chance "IF you have uploaded to the latest version of mpt3sas downgrade it as per https://github.com/wjz304/arpl-i18n/issues/199 and see if this solves my issues at all if you have time please. Thanks again
  8. Vodka2014
    Hi @Peter Suh Is there anything else i can try ?
  9. Vodka2014
    Anything right now to see if i can get my system backup and running. Thanks
  10. Vodka2014
    因此，将“”保留为无值或将其设置为 0 So leave it is "" with no value or set it to 0
  11. Vodka2014
    Interesting that you got the H310 to work when https://github.com/wjz304/arpl-i18n/issues/209 is the same issue i am having on DS3622xs+. The driver is crashing it seems.
  12. Vodka2014
    Hi @wjz304 Google Translate. I hope it is correct. 带 4 个磁盘的 4 端口 HBA LSI 9211-4I 的设置是什么 谢谢 What will the settings be for an 4 Port HBA LSI 9211-4I with 4 disks Thanks
  13. Vodka2014
    Hi @shibby Did you have to leave the SasIdxMap in still or only update those 2 values ?
  14. Vodka2014
    Thanks @wjz304 Is there an online copy of this at all that i can load please
  15. Vodka2014
    Hi @shibby This is interesting. So since i have 4 Disks on the LSI 9211-4i what should I try and use ? I am using the below: "DiskIdxMap": "1000", "SataPortMap": "12", "SasIdxMap: "0", "MaxDisks: "16"
  16. Vodka2014
    HI @Peter Suh Sorry for another post i cannot edit the other one. What is your recommendations here please ? Thanks
  17. Vodka2014
    Question for this now is if i remove the SAS Disk and add the SATA disks back to the onboard Controller so 3 SATA in Degard state and then do what you stated J and re-load DSM is this a bad idea ?
  18. Vodka2014
    Thanks for this. It is already on Legacy (will triple check) and the disks do show on the controller all 4 of them. The interesting thing is it worked the first time when i updated then it went dead in DSM.
  19. Vodka2014
    My Issue Above has been confirmed as mpt3sas module issue and getting looked at.
  20. Vodka2014
    Thanks a lot so now this needs to get fixed and once done rebuild the loader again. I take it this is WIP now to get fixed. Thanks again for all your help & support with all of this. I hope there is a fix soon. I take it this is just a messed-up DSM Partition that needs to get re-installed.
  21. Vodka2014
    Hi @Peter Suh As requested. based on what you stated i did find this: modprobe: ERROR: could not insert 'mpt3sas': Exec format error Thanks again linuxrc.syno.log dmesg
  22. Vodka2014
    Thanks alot and i apricate it . So when i use the WebUI it will and ask me to load again. I will do 7.2 Update 1 .pat that correct ? Hi @Peter Suh I am now getting a message No Disks Detected. Should i change to DS918 or something else that supports an HBA ?
  23. Vodka2014
    Do you have some steps on how to load this once i get Ubuntu Loaded ? As i do not want to break this if i do this.
  24. Vodka2014
    Hi @Peter Suh It is still in the same state. "System Getting Ready" Please Log In later What is the next steps for this please. It must be able to see the disks somehow since it showed me to Recover again and the lights on the controller was blinking. Is there a way to Downgrade, Move back to the SATA Controller ? How do i know if there is still data on my disks since i cannot see them as it seems it is not loading after reboot. It is strage that it worked once when i upgrade and never again so far.
  25. Vodka2014
    Never mind it just took a long time to connect. Load Built and now rebooting so lets see.
×
×
  • Create New...