doedels
-
Posts
10 -
Joined
-
Last visited
Posts posted by doedels
-
-
cat /proc/bus/pci/devices > bus_pci_devices
from my ds1010+
-
On my 1010+ no i2c devices detected
DiskStation> ./i2cdetect -l
DiskStation> ./i2cdetect -y 0
Error: Could not open file `/dev/i2c-0' or `/dev/i2c/0': No such file or directory
But i can see this mod loaded.
DiskStation> lsmod |grep i2c
i2c_algo_bit 4808 0
DiskStation> ./lspci 00:00.0 Host bridge: Intel Corporation Device a000 (rev 02) 00:02.0 VGA compatible controller: Intel Corporation Device a001 (rev 02) 00:02.1 Display controller: Intel Corporation Device a002 (rev 02) 00:1a.0 USB Controller: Intel Corporation USB UHCI Controller #4 (rev 02) 00:1a.1 USB Controller: Intel Corporation USB UHCI Controller #5 (rev 02) 00:1a.2 USB Controller: Intel Corporation USB UHCI Controller #6 (rev 02) 00:1a.7 USB Controller: Intel Corporation USB2 EHCI Controller #2 (rev 02) 00:1c.0 PCI bridge: Intel Corporation PCI Express Port 1 (rev 02) 00:1c.4 PCI bridge: Intel Corporation PCI Express Port 5 (rev 02) 00:1c.5 PCI bridge: Intel Corporation PCI Express Port 6 (rev 02) 00:1d.0 USB Controller: Intel Corporation USB UHCI Controller #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation USB UHCI Controller #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation USB UHCI Controller #3 (rev 02) 00:1d.7 USB Controller: Intel Corporation USB2 EHCI Controller #1 (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92) 00:1f.0 ISA bridge: Intel Corporation LPC Interface Controller (rev 02) 00:1f.2 SATA controller: Intel Corporation 6 port SATA AHCI Controller (rev 02) 00:1f.3 SMBus: Intel Corporation SMBus Controller (rev 02) 01:00.0 Mass storage controller: Silicon Image, Inc. SiI 3132 Serial ATA Raid II Controller (rev 01) 02:00.0 Ethernet controller: Intel Corporation Device 10d3 03:00.0 Ethernet controller: Intel Corporation Device 10d3 DiskStation> ./lspci -n 00:00.0 0600: 8086:a000 (rev 02) 00:02.0 0300: 8086:a001 (rev 02) 00:02.1 0380: 8086:a002 (rev 02) 00:1a.0 0c03: 8086:2937 (rev 02) 00:1a.1 0c03: 8086:2938 (rev 02) 00:1a.2 0c03: 8086:2939 (rev 02) 00:1a.7 0c03: 8086:293c (rev 02) 00:1c.0 0604: 8086:2940 (rev 02) 00:1c.4 0604: 8086:2948 (rev 02) 00:1c.5 0604: 8086:294a (rev 02) 00:1d.0 0c03: 8086:2934 (rev 02) 00:1d.1 0c03: 8086:2935 (rev 02) 00:1d.2 0c03: 8086:2936 (rev 02) 00:1d.7 0c03: 8086:293a (rev 02) 00:1e.0 0604: 8086:244e (rev 92) 00:1f.0 0601: 8086:2916 (rev 02) 00:1f.2 0106: 8086:2922 (rev 02) 00:1f.3 0c05: 8086:2930 (rev 02) 01:00.0 0180: 1095:3132 (rev 01) 02:00.0 0200: 8086:10d3 03:00.0 0200: 8086:10d3
-
Tried using only pata disk, still fails..
-
Linux DiskStation 3.2.40 #3776 SMP Sat Aug 17 02:16:50 CST 2013 x86_64 GNU/Linux synology_x86_1010+
0000 8086a000 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0010 8086a001 a fe880000 bc01 d0000008 fe700000 0 0 2 80000 8 10000000 100000 0 0 0 0011 8086a002 0 fe680000 0 0 0 0 0 0 80000 0 0 0 0 0 0 00d0 80862937 10 0 0 0 0 b881 0 0 0 0 0 0 20 0 0 uhci_hcd 00d1 80862938 15 0 0 0 0 b801 0 0 0 0 0 0 20 0 0 uhci_hcd 00d2 80862939 13 0 0 0 0 b481 0 0 0 0 0 0 20 0 0 uhci_hcd 00d7 8086293c 12 fe87bc00 0 0 0 0 0 0 400 0 0 0 0 0 0 ehci_hcd 00e0 80862940 28 0 0 0 0 0 0 0 0 0 0 0 0 0 0 pcieport 00e4 80862948 29 0 0 0 0 0 0 0 0 0 0 0 0 0 0 pcieport 00e5 8086294a 2a 0 0 0 0 0 0 0 0 0 0 0 0 0 0 pcieport 00e8 80862934 17 0 0 0 0 b401 0 0 0 0 0 0 20 0 0 uhci_hcd 00e9 80862935 13 0 0 0 0 b081 0 0 0 0 0 0 20 0 0 uhci_hcd 00ea 80862936 12 0 0 0 0 b001 0 0 0 0 0 0 20 0 0 uhci_hcd 00ef 8086293a 17 fe87b800 0 0 0 0 0 0 400 0 0 0 0 0 0 ehci_hcd 00f0 8086244e 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 00f8 80862916 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 00fa 80862922 2b ac01 a881 a801 a481 a401 fe87b000 0 8 4 8 4 20 800 0 ahci 00fb 80862930 e fe87ac04 0 0 0 401 0 0 100 0 0 0 20 0 0 0100 10953132 10 fe9ffc04 0 fe9f8004 0 cc01 0 fe900000 80 0 4000 0 80 0 80000 sata_sil24 0200 808610d3 2c feae0000 0 dc01 feadc000 0 0 0 20000 0 20 4000 0 0 0 e1000e 0300 808610d3 2d febe0000 0 ec01 febdc000 0 0 0 20000 0 20 4000 0 0 0 e1000e
-
The check is most likely implemented by using the buildin serial controller that is connected to the onboard sensors.
-> http://smallhacks.wordpress.com/2012/04 ... -devttys1/
If so then we need to create some kind of emulator service to fake any responses on the com port.
I will try to test this by relaying the ESX com port to a read diskstation and see what happens.
-
Ok, i got past the grub 22 error like this onm esx5.1:
New virtual machine -> custom->Version 8->Linux Other 2.6.x 64Bit
Network card is VMXnet 3
Create New IDE disk 0:1 for datadisk
Add ide converted synoboot img as IDE 0:0
Power on
Serach for it with synology assistant
Install and unselect create RAID SHR
Assign IP and start the install (here it stops at formatting, console output shows some stuff)
Go to http://youripofdiskstation and install using Install DSM from my computer
Then start the install
After the install it will reboot and give grub 22 error
Power down and re-upload synoboot image for ide 0:0
Then power up
It will work, but also no disks
-
Many thanks Jukolaut!
-
Great work jukolaut, can you share your work so far?
-
IDE drives are seen as md devices, that is why it will fail on esx 5 (or workstation 9)
The firmware image will be overwritten during install.
I managed to get it to work by restoring the firmware image after install.
Would be better if ide devices would not be mapped into md devices.
If i have time i will look into it this weekend.
Cheers
4.3 issues
in DSM 5.2 and earlier (Legacy)
Posted
for /dev/ttyS1 look here --> http://smallhacks.wordpress.com/2012/04 ... -devttys1/