stanza

I did a fresh install on a new Microserver today Noticed when using the offline update there was a couple of segfaults happen when the control panel DSM update is selected Might have to install again and see if I can catch them .

Yes, I have. My problem is not discussed there. And the problems discussed there are not present in my configuration ('cause of less number of hdd's and more recent synoboot used). Furthermore my question is quite concrete - why pata_legacy module is automatically loaded in my configuration with no pata at all?.. And moreover - what for do we need this module in hba oriented version of synoboot?.. Is your bios set to use SATA compatability mode for the SATA controller? .

Done, please check

Done, please check

Sash into it Fdisk /dev/sda Delete all partitions Do the same for all other drives Reboot

Sash into it Fdisk /dev/sda Delete all partitions Do the same for all other drives Reboot

ok for 23 internal ports try 0xFFFFFF 24 ports and usb as 0xFFF000000 12 ports E-sata cannot overlap usb or internal hance why your 0x0010 and 0x0100 didn't work to enable E-sata you would have to push USBports further left (add an extra 0 to the right) eg 0xFFF0000000 and e-sata would become 0x01000000 etc

ok for 23 internal ports try 0xFFFFFF 24 ports and usb as 0xFFF000000 12 ports E-sata cannot overlap usb or internal hance why your 0x0010 and 0x0100 didn't work to enable E-sata you would have to push USBports further left (add an extra 0 to the right) eg 0xFFF0000000 and e-sata would become 0x01000000 etc

you could transfer an ISO image of the DVD to it. then use file manager to mount the ISO image thats one way to get around the problem .

you could transfer an ISO image of the DVD to it. then use file manager to mount the ISO image thats one way to get around the problem .

Any computer connected to the net is going to see attacks. Me personally I don't have anything accessable to the net...

Any computer connected to the net is going to see attacks. Me personally I don't have anything accessable to the net...

Need more info Which ACTUAL SAS controller are you using? I havn't seen a 4 port 2008 controller......is it a 4 port or are you only using 4 ports of an 8 port controlller? Which ports are drives connected too? all 10 x SATA + 4 on the SAS controller? How are they connected? eg direct by cables? or drives are in backplanes.....and do the backplanes have any SAS expander? .if you have troubles, most find it best to go higher on the hex code than the ports you have. you have esataportcfg=”0x0000” <<< (no E-SATA Ports), but you say the board has 2 x E-SATA.......are any drives connected? if not it's best to dissable the ports in the BIOS .

Need more info Which ACTUAL SAS controller are you using? I havn't seen a 4 port 2008 controller......is it a 4 port or are you only using 4 ports of an 8 port controlller? Which ports are drives connected too? all 10 x SATA + 4 on the SAS controller? How are they connected? eg direct by cables? or drives are in backplanes.....and do the backplanes have any SAS expander? .if you have troubles, most find it best to go higher on the hex code than the ports you have. you have esataportcfg=”0x0000” <<< (no E-SATA Ports), but you say the board has 2 x E-SATA.......are any drives connected? if not it's best to dissable the ports in the BIOS .

write time dd if=/dev/zero of=/volume1/video/ddtest bs=1024000 count=20000 read time dd if=/volume1/video/ddtest of=/dev/null bs=1024000

write time dd if=/dev/zero of=/volume1/video/ddtest bs=1024000 count=20000 read time dd if=/volume1/video/ddtest of=/dev/null bs=1024000

So which bios was the fastest in the end? .

So which bios was the fastest in the end? .

you say 60mb/s windows transfer..... but is that native? eg explorer?..... or using some other program like teracopy? teracopy btw is know to slow the heck out of your transfers. .

happens sometimes.....probably busy. try again, or download the package separately being shared by a few people here http://xpenology.com/forum/viewtopic.php?f=2&t=2049 .

ok so let me get this right your copying via SMB? From one Synology to another THRU your macbook? if so is your macbook connected via cable......AND Wireless? is wireless taking priority? (whats your routing table look like?) tried turning wireless off? .

what does it say in network interface? I am betting it's not connected @ gigabit...... if so change your lan cable

ewwwww dont use THAT, they are slow slow slow...... .

can you not log in and run ifconfig to see what IP address it has? probably changed eth0 to eth1 (from adding the card in) in which case you might have to swap cables between ports and reconfigure mac addresses to the correct ones. .

Well of course that's going to happen Your dhcp server is assigning IP to each one Plug one port only into switch Setup xpenology Then go into networking and either assign bonds or some other IP What are you trying to achieve as an end result? .