Jump to content
XPEnology Community

holybabel

Member
  • Posts

    171
  • Joined

  • Last visited

Everything posted by holybabel

  1. Hi everyone, is it possible to enable this like the powernow-k8 module? I have an old Intel Core 2 Duo E4500 which always runs at 2.2Ghz. The CPU supports 1.2, 1.6. and 2.2Ghz, so i think this could be very good for power saving. Greetings holybabel
  2. Hi everyone, i have a Scaleo Home Server aka Intel SS4200. This devices has a 256MB PATA DOM-Module. I use the module as boot device for xpenology. To access this pata device i currently use a live usb stick. Then i can write the img from XPEnoboot to the device. Within xpenology i can't see the device under configuration. Is it possible to access (maybe with putty) the device from within xpenology so i don't need the live usb stick anymore? It is very annoying to always detour over the usb live stick. I already tried to 'find' the pata device with putty but fdisk only shows my 3 scsi drives. 'parted' also shows only my 3 scsi drives. Greetings holybabel
  3. Hi everyone, i read about this in another thread. Can someone explain to me what i have to do? I get the following for each drive i have installed: DiskStation> syno_disk_ctl --wd-idle -g /dev/sda Get /dev/sda WD idle3 timer [0] successfully Does this mean that the idle3 timer is disabled? Is there something i have to do? When i change the timer to 255 and then shutdown and start again the system shows [0] again. Greetings holybabel
  4. https://www.synology.com/en-us/knowledgebase/faq/579
  5. Theoretisch dürftest du keine Probleme. Du benutzt ja das aktuelle Boot-Image, oder?
  6. Had the same issue for a few minutes. Now the site works again.
  7. Ich vermute das die Software nur 12 unterstützt, da das zugrunde liegende Modell (DS3615xs) nur 12 Schächte besitzt. Mehr als 12 wird wohl nicht gehen.
  8. Hi pontecraig, do you want to make a mayor update (5.0 -> 5.1) or a small update (5.1-5022 -> 5.1-5022u1). Both update methods are described here: http://www.xpenology.nl/tutorials/ Mayor update: http://www.xpenology.nl/installation-dsm-5-1/ Small Update: http://www.xpenology.nl/installation-ds ... -update-2/ Greetings holybabel
  9. What do you mean with "stock synology DSM file"? All pat files are directly from synology. Only the boot image is modified by the xpenology team.
  10. I think you can use normal upgrade way: http://www.xpenology.nl/installation-dsm-5-1/
  11. Alle. Wenn du im Heimnetz bist, dann halt mit der lokalen IP. Wenn du von "außerhalb" zugreifen willst brauchst du halt einen anderen DynDNS-Anbieter. Ich nutze z.B. selfhost.eu. Funktioniert wunderbar.
  12. When you use the upgrade option of the bootloader you can migrate keeping your data.
  13. Zumindest zum Thema WOL kann ich dir was sagen. Hast du es nach dieser Anleitung mal eingerichtet: http://www.xpenology.nl/wake-on-lan/
  14. Have you tried this how to: viewtopic.php?f=15&t=3339
  15. Der typische Fehler der derzeit bei 5.1 auftritt. Viele User im englischen Thread berichten genau dasselbe. Shares sind erreichbar aber sonst geht gar nichts mehr. Ich würde dir zu einem Downgrade raten.
  16. Da könnte eventuell der/ein Arbeitsspeicher kaputt sein. Wenn du zwei hast, dann zieh mal einen raus und probiere dann mal die Riegel durch.
  17. Du hättest von 4493 direkt auf 4528 updaten können. Danach hättest du dann das Update auf 4528 Update 2 machen können.
  18. Du hättest gleich das letzte Update nehmen können. Die Updates beinhalten immer alle vorher veröffentlichten Updates. Die Datei kannst du von xpenology.nl downloaden.
  19. Got exactly the same problem. I posted the info in xpenoboot thread ( viewtopic.php?f=2&t=5026&start=70#p29692 ). Maybe you can post your info there too.
  20. Ich glaube das es derzeit unter 5.1 nicht geht, im xpenoboot Thread steht glaube ich sowas.
  21. Die Frage zielte eher darauf was am längsten dauert? Bei mir war es mit dem alten Stick z.B. das entpacken des Image was ewigkeiten gedauert hat.
  22. Was siehst du denn beim starten? Was dauert so lange? Das entpacken des img ?
  23. You should take the DSM 5.0. You can download the pat files from xpenology.nl.
×
×
  • Create New...