pippopluto9393

Members
  • Content count

    13
  • Joined

  • Last visited

Community Reputation

0 Neutral

About pippopluto9393

  • Rank
    Newbie
  1. Hi. DSM 5.1-5055.1 is a stable version? Known bugs? Actually I'm on DSM 5.1-5022 Update 5. Do you recommend to update? Thanks!
  2. Asrock Q1900-ITX/Q1900DC-ITX

    Another question: I wake my server from DS Finder app but not always start at first try.. Someone knows why? Shutdown from DS Finder always works at first try.
  3. Asrock Q1900-ITX/Q1900DC-ITX

    I want to thank platon2k! With his suggestions now WOL is working!! I think my problem was with wrong motherboard setup. P.S. I have AsRock AM 1H ITX motherboard
  4. Asrock Q1900-ITX/Q1900DC-ITX

    Thanks a lot. I'll try! On point 2 you said "2) yes. 5.0.3.2. ". I have nanoboot DSM 5.0-4528 Update 2. Wol works good on this version?
  5. Asrock Q1900-ITX/Q1900DC-ITX

    Hello. 1) Someone can explain which configurations are needed on Bios to enable wol? 2) is wol working with nanoboot? on which version is ok? 3) Do I need to put this row? menu_nano.lst kernel /zImage ihd_num=0 netif_num=4 sn=B3J4N02105 vid=0x0EA0 pid=0x2168 loglevel=0 vga=0x305 rmmod=r8169 insmod=r8168 Thanks!
  6. Asrock Q1900-ITX/Q1900DC-ITX

    Do I need to adapt S99 ZZZ Shutdown script? Thanks
  7. Ciao a tutti. Scrivo anche nella sezione italiana perché su quella internazionale nessun suggerimento mi ha risolto il problema. Sto cercando da tanto tempo di utilizzare la funzione Wake On Lan. Ho abilitato Wake On Lan sulla mia motherboard : http://www.asrock.com/mb/AMD/AM1H-ITX/ Ho provato il seguente tutorial : http://www.xpenology.nl/wake-on-lan/ Utilizzo Nanoboot (5.0.3.2) DSM 5.0-4528 Update 2. Ma tutte le prove sono fallite. Qualcuno è riuscito? Grazie
  8. Asrock Q1900-ITX/Q1900DC-ITX

    Sorry but it's not working on my pc Any suggestions? Is there a video tutorial? Can depend from DSM version? (I have DSM 5.0-4528 Update 2) Thanks
  9. Asrock Q1900-ITX/Q1900DC-ITX

    Thanks, I try tonight! eth0_wol_options="g" is ok? How much does it take to start with WOL?
  10. Asrock Q1900-ITX/Q1900DC-ITX

    Hello. I'm trying this tutorial : http://www.xpenology.nl/wake-on-lan/ First of all, I've enabled Wake On Lan on my motherboard : http://www.asrock.com/mb/AMD/AM1H-ITX/ This is my MAC Address (on Synology Assistant and on router) : F0:50:59:2F:D4:1C On Part 1 in menu_nano.lst (Nanoboot (5.0.3.2) DSM 5.0-4528) : I've added only mac1, no other change kernel /zImage ihd_num=0 netif_num=4 syno_hw_version=DS3612xs sn=B3J4N01003 mac1=F050592FD41C vid=0x0EA0 pid=0x2168 loglevel=0 vga=0x305 On part 2 point 9 : With WinSCP (ssh some problem with vi) I've set in : etc/synoinfo.conf like this : wol_enabled_options="" eth0_wol_options="g" After NAS restart the ' WOL 'status is now "WOL". Now from Synology Assistant : WOL -> Activate ... after 100% -> WOL Status : N/D What I'm doing wrong? Nas is shutdown but is normally connected to power line and ethernet cable. Do I need other? Asrock motherboard have problems with drivers? Thanks!
  11. DSM 5.0-4528 Wake On LAN

    Any suggestion? Thanks!
  12. DSM 5.0-4528 Wake On LAN

    Hello. I've changed netif_num=1 in menu_nano.lst file. I've tryed two times with and without mac1 parameter. Nothings happen. WOL status N/D at last. I have edited both /etc.defaults/synoinfo.conf and /etc/synoinfo.conf files, with these settings : eth0_wol_options="g" wol_enabled_options="" MAC address the system is recognising with ssh command dmesg | grep "eth" is the same I've setted DiskStation> dmesg | grep "eth" [ 3.449861] b44: Unknown symbol phy_ethtool_sset (err 0) [ 3.449993] b44: Unknown symbol phy_ethtool_gset (err 0) [ 3.482366] r8169 0000:02:00.0: eth0: RTL8168b/8111b at 0xffffc9000007e000, f0:50:59:2f:d4:1c, XID 0c000880 IRQ 74 [ 3.482370] r8169 0000:02:00.0: eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko] [ 11.855726] usbcore: registered new interface driver ethub [ 13.186736] r8169 0000:02:00.0: eth0: link down [ 13.186770] r8169 0000:02:00.0: eth0: link down [ 13.187411] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 14.768504] r8169 0000:02:00.0: eth0: link up [ 14.769184] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 25.650069] [b]eth0: no IPv6 routers present[/b] 1) Last row is an error?!? 2) Sorry but I don't understand "Be aware that wake on lan doesn't like to transverse wireless networks.( if your trying to wake the box from a phone etc)" Thanks
  13. DSM 5.0-4528 Wake On LAN

    Hello. I'm trying this tutorial : http://www.xpenology.nl/wake-on-lan/ First of all, I've enabled Wake On Lan on my motherboard : http://www.asrock.com/mb/AMD/AM1H-ITX/ This is my MAC Address (on Synology Assistant and on router) : F0:50:59:2F:D4:1C On Part 1 in menu_nano.lst (Nanoboot (5.0.3.2) DSM 5.0-4528) : I've added only mac1, no other change kernel /zImage ihd_num=0 netif_num=4 syno_hw_version=DS3612xs sn=B3J4N01003 mac1=F050592FD41C vid=0x0EA0 pid=0x2168 loglevel=0 vga=0x305 On part 2 point 9 : With WinSCP (ssh some problem with vi) I've set in : etc/synoinfo.conf like this : wol_enabled_options="" eth0_wol_options="g" After NAS restart the ' WOL 'status is now "WOL". Now from Synology Assistant : WOL -> Activate ... after 100% -> WOL Status : N/D What I'm doing wrong? Nas is shutdown but is normally connected to power line and ethernet cable. Do I need other? Thanks!