Jump to content
XPEnology Community

Luks1983

Member
  • Posts

    20
  • Joined

  • Last visited

Everything posted by Luks1983

  1. Do you have keyboard, flashdrive and monitor connected to rn316? Wysłane z mojego SM-S911B przy użyciu Tapatalka
  2. Greetings guys, I need help with no booting issue after update from 7.1.1 to 7.2 version. I tried everything for now, even loader rebuild with friend option. But I still getting recovery window which i cant finish due to error message during recovery. I have installed on disk dsm 7.2-64570 for ds3622xs+ but like i said i cant force it to make a upgrade/installation whatever. Can some help me to resolve this issue? I have important data on drives.
  3. I have Intel Atom 2700 on board. In my daily activities I never reach more than 900rmp on fan. After fan replacement CPU temperature is 35 degrees Celsius, drives temps are max 41 degrees. Before I replaced the fan I did many checks and tests. I also compared Noctua air flow with factory fan air flow. And I can say that Noctua has almost the same airflow with 600rpm speed as factory fan on 1100rpm. I also do not have 4x12TB HDD. I have only 2,5 inch drives: 1x2TB SSD, 4x4TB Seagate and 1x1TB ssd. And for the end, I have RN316 which has completely different CPU than RN516 or RN716. It has passive cooled Intel Atom 2700 on board with 2cores and 10W TDP. It is basically tablet cpu. So my setup is completely different than yours. So don't tell me what is professional and what is not. Wysłane z mojego SM-S911B przy użyciu Tapatalka
  4. Nope. It is arm architecture. Wysłane z mojego SM-S911B przy użyciu Tapatalka
  5. I didn't. I replaced factory fan to Noctua with fixed 600rpm speed. Wysłane z mojego SM-S911B przy użyciu Tapatalka
  6. You have to tap delete when your nas starts. Reboot it and tap delete. Obviously keyboard is needed. Wysłane z mojego SM-S911B przy użyciu Tapatalka
  7. Hi, I have to check it. Right now i do not remember exact name of internal flash drive. But im sure there is a secondary drive, which must be disabled to avoid confusion with boot order configuration. Wysłane z mojego SM-S911B przy użyciu Tapatalka
  8. Hi. I want to ask, how did you manage real CPU model information? Regards
  9. Hello team, I backed up with success internal readynas flash drive. To do it i used flash drive with Live Clonezilla. Screen is attached, but im not sure if that will help us with anything, due to this internal storage is preety small. It has ~251MB (yes, megabytes). So actually we can put there only xpenology loader, i assume. For further infos, you can ping my via pm. Regards. PS. Right now im trying to install proxmox on this unit.
  10. Yes, until you will not touch internal flash drive, it remain intact. And you can simply revert to readynas os. About backup it, im working on that. I'll let you guys know how that goes here in couple days.
  11. Hi team, i installed DSM 7 with all minor updates on RN316. The main case was to connect this unit with external screen, in my case it was LG Oled TV. With that I was able enter int to the bios, and change boot order. I disabled internal USB flash drive which is soldered on motherboard, and set up as first boot device flash drive with TCRP Loader. After booting to TCRP installation went simply smooth with two exceptions: 1. i had to manually edit user file *.json and add there PID and VID from my flash drive, due to script did not put this info automatically in to config file 2. i had to manually change NIC's count from "1" to "2" ( RN316 has two physical ethernet interface ), and manually add line with second NIC mac address After building loader, i booted nas from flash drive, choose in grub my build (DS3622xs+ in latest version), boot, finded my xpenology in synology assistant and installed DSM from pat file. In your case work is more difficult because RN628x do not have video output. But as far i checked you have PCI-e slot x8 on board. And on back plate you have low profile bracket. I believe there is a way to connect external graphic card or at least some DVI extension bracket. So the best way will be to dissasembly you unit, put it on the table, connect some low profile graphic card and check if you will receive video signal in you lcd monitor. Also there is M2 slot, i do not know if you are using it for ssd cache etc.., but also this slot can be use to move video signal on the external bracket. Let me know how it goes. Further we will think how to assembly all parts together. Regards. PS. I did not impact internal USB flash. I simply disable it in bios. So this drive remain intact and there is a way to revert ReadyNAS OS 6. Right now im working on it. I want back this drive up to external drive, format it and put there TCRP loader and remove external USB flash drive. PS.2 Sorry for my english. I'm still working on it. And try to not use a translator. PS3. There is also a way to move internal PCI-E slot outside readynas box. You have to use extension cable, similar to this: kdjsic PCI-Express Extension Cable for PCI-Express Graphics Card 20cm : Amazon.com.be: Electronics https://www.amazon.com.be/-/en/kdjsic-PCI-Express-Extension-Cable-Graphics/dp/B09JLQY1NR
  12. Send me pm. I will write you step by step manual. Wysłane z mojego SM-S911B przy użyciu Tapatalka
  13. Do not throw it to the trash. After xpenologied, this device can be very reliable. Wysłane z mojego SM-S911B przy użyciu Tapatalka
  14. - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.1.1-42962 Update 1 - Loader version and model: TCRP v0.9.4.3 DS3622xs+ - Using custom extra.lzma: no - Installation type: Baremetal NETGEAR ReadyNAS RN316 Intel Atom D2701 2c/4t 2,13 4GB ram - Additional comments: Followed full update path from U1 to U4 without any issues Upgraded to DSM 7.1.1-42962 Update 4 via GUI Booted into TCRP and ran: ./rploader.sh update ./rploader.sh postupdate ds3622xsp-7.1.1-42962 exitcheck.sh reboot
  15. OK. Little update. I manage updates nad I was able to follow full update path from Update 2 to Update 4, without any issues.
  16. Yesterday i successfully installed xpenology on my Netgear ReadyNas RN316.
  17. Hello team, I also builded yesterday bootloader for my old Netgear NAS, RN316. I successfully booted and started DS3622xs+, without any issues. Build is working correctly. I used for this build DS3622xsp-7.1.1-42962.pat file with Update 1 inside. But when i tried to push patch Update 2 via GUI, after reboot my nas went in to boot loop. Syn Assistant and web assistant also, wants to recover/reinstall DSM. I tried to do that, without any success. Can any one help, or direct me where i can find correct procedure (step by step or whatever) for install patches/upgrades? Or provide any infos what should i do after update? Maybe some additional actions are required with TCRP? PS: What "withfriend" option means? Regards guys.
×
×
  • Create New...