18wheeler

Members
  • Content count

    25
  • Joined

  • Last visited

Community Reputation

0 Neutral

About 18wheeler

  • Rank
    Junior Member
  1. did import the new certificate, no luck. in the end, the solution is very simple: Go to 'Package Station', click the 'setting' tab, and change the 'allow installation of package published by' to 'any publisher' It is odd xpenology does not recognize the publisher's certificates.
  2. Hi, I am running DSM 5.2-5565 Update 1 on ESXi 5.5. It was migrated from HP N40L. Only recently I noticed that I cannot install new package or update existing packages. For example, when I try to update the "audio station", it downloads installer fine, but fails during installation with error message: "Failed to update "Audio Station", This package is published by an unknown publisher." Although the audio station is developed by Synology. I cannot install new packages either. Always have error: "Failed to install ****" Anyone has encountered same issue? How to fix it? Thanks!
  3. It is surely big. But it will be in the basement anyway.
  4. Seems that there are plenty of older servers with dual Xeon CPU on ebay. They are priced $250~$350 shipped. For example this one that has dual L5520 CPU, 16GB or ram, 12x HDD bay (6 connected) for $335 shipped. Is there reason that it is a bad idea to add my own 2~4TB hdd and install Xpenology on it? thanks!
  5. I am eyeing this motherboard with 14 sata /sas ports: SUPERMICRO MBD-X10SL7-F-O (viewtopic.php?f=2&t=4680) Newegg has good price on it right now.
  6. I am eyeing this motherboard with 14 sata /sas ports: SUPERMICRO MBD-X10SL7-F-O (http://xpenology.com/forum/viewtopic.php?f=2&t=4680) Newegg has good price on it right now.
  7. Hi, wondering if anyone tried this motherboard "SUPERMICRO MBD-X10SL7-F-O uATX Server Motherboard LGA 1150 Intel C222 DDR3 1600". It looks like reasonably priced, with features suitable to NAS. What interests me is that it has total 14 sata/sas ports on board: 4 x SATA 3.0Gb/s + 2 x SATA 6.0Gb/s 8x SAS2 (6Gbps) ports via LSI 2308 It also has two Gbit LAN port (Intel I210-AT) I am thinking of using it for a custom Xpenology build. But want to know first if these hardware are supported? Also what (inexpensive) CPU would you recommend? Thanks!
  8. Just saw this: Disabled SATA IDE combined mode in BIOS, still no good. Sigh.. EDIT: while the booting message still says 4 out 5 drives active, the 'missing' drive actually shows up in the storage manager. I am rebuilding the array.
  9. I have the same problem when using gnoboot 10.5: viewtopic.php?f=2&t=3114 Have you found a solution yet? I am still searching...
  10. put two lines in /etc/rc.local: insmod /lib/modules/pata_acpi.ko insmod /lib/modules/pata_amd.ko after reboot, the drive is still missing. My BIOS has been flashed with mod. So these drivers are not needed after all?
  11. Indeed, from the 10.5 changelog: So I lost the 5th SATA port and the on board ESATA port on the other hand: And my sandisk 5-drive esata case finally worked under Xpenology. Now, how do I "manually insmod these drivers"?
  12. EDIT: I have seen two other cases that gnoboot 10.5 + N40L misses SATA drive that is on the CDROM port. by using pata_amd pata_acpi and disable SATA/IDE combined mode, it seems to be working now :EDIT Not sure if anyone else has this problem, I lost the 5th SATA drive after upgrading to DSM 5.0. The drive is still visible in BIOS, but gnoboot says '4 out of 5' drives exist, and storage manager shows only 4 drives too. neither drive on the esata port nor the 5th sata (optical drive sata) drive show up. I know the drive is fine, because I swapped the 5th diver to slot 1, and it works and shows up fine and the drive 1 (now is on 5th sata port) not working. I already have the 'internalportcfg' set to oxfff in synoinfo; I already changed sata cable and tested power cable works. Any idea what I can do now? Thanks!
  13. Thanks for detailed post. Very good information I need to learn how to compile the driver for RR622 Before using Xpenology, I was running win8 on BIOS hacked N40L. The tower worked with the onboard esata port. So in theory, it could work. Performance is a different story though.
  14. Thanks for detailed post. Very good information I need to learn how to compile the driver for RR622 Before using Xpenology, I was running win8 on BIOS hacked N40L. The tower worked with the onboard esata port. So in theory, it could work. Performance is a different story though.
  15. The RocketRaid 622 card (comes with the 5-bay SansDigital TR5M+B esata tower) did not work in my N40L + Xpenology. From what I have read rocket 622 (not RR) does not even have port multipliers, at lease not without diver hacking. Would be nice to have N40L's own esata PM work. I got some hints (described in this post: viewtopic.php?f=2&t=2272#p11931). but really need to read more to understand how it might work.