Nuttawat_t

and for disks: dmesg | grep sd [ 0.000000] ACPI: SSDT 0x000000006FF47660 005384 (v02 SaSsdt SaSsdt 00003000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x000000006FF4CA30 000E58 (v02 CpuRef CpuSsdt 00003000 INTL 20120913) [ 31.052985] <redpill/scsi_notifier.c:182> The sd driver is not ready to dispatch SCSI device notifier events - awaiting driver [ 31.202851] <redpill/intercept_driver_register.c:216> Registered driver_register() watcher for "sd" driver (coming=1, live=0) [ 42.919962] <redpill/override_symbol.c:257> Overriding sd_ioctl() with sd_ioctl_canary [redpill]()<ffffffffa000a720> [ 43.060566] <redpill/override_symbol.c:172> Saved sd_ioctl() ptr <ffffffff813f29b0> [ 43.311123] <redpill/override_symbol.c:221> Obtaining lock for <sd_ioctl+0x0/0x210/ffffffff813f29b0> [ 43.511399] <redpill/override_symbol.c:188> Generated trampoline to sd_ioctl_canary+0x0/0x230 [redpill]<ffffffffa000a720> for sd_ioctl<ffffffff813f29b0>: [ 44.046829] <redpill/override_symbol.c:269> Successfully overrode sd_ioctl() with trampoline to sd_ioctl_canary+0x0/0x230 [redpill]<ffffffffa000a720> [ 58.653809] <redpill/intercept_driver_register.c:99> driver_register() interception active - calling handler sd_load_watcher+0x0/0x60 [redpill]<ffffffffa0000b80> for "sd" [ 58.677221] <redpill/scsi_notifier.c:137> sd driver loaded - triggering sd_probe shim installation [ 58.686274] <redpill/scsi_notifier.c:104> Overriding sd_probe()<ffffffff813f3b50> with sd_probe_shim [redpill]()<ffffffffa0000930> [ 58.759652] <redpill/intercept_driver_register.c:245> Removed sd_load_watcher+0x0/0x60 [redpill]<ffffffffa0000b80> subscriber for "sd" driver [ 58.882513] ahci 0000:00:17.0: flags: 64bit ncq sntf pm led clo only pio slum part ems deso sadm sds apst [ 59.397641] <redpill/scsi_notifier.c:65> Probing SCSI device using sd_probe_shim [ 59.413387] <redpill/scsi_notifier.c:87> Calling original sd_probe() [ 59.427891] <redpill/scsi_notifier.c:91> Triggering SCSI_EVT_DEV_PROBED notifications - sd_probe() exit=0 [ 59.427915] sd 0:0:0:0: [sata1] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 59.427916] sd 0:0:0:0: [sata1] 4096-byte physical blocks [ 59.427944] sd 0:0:0:0: [sata1] Write Protect is off [ 59.427945] sd 0:0:0:0: [sata1] Mode Sense: 00 3a 00 00 [ 59.427955] sd 0:0:0:0: [sata1] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 59.452568] sd 0:0:0:0: [sata1] Attached SCSI disk [ 61.440767] <redpill/scsi_notifier.c:65> Probing SCSI device using sd_probe_shim [ 61.456511] <redpill/scsi_notifier.c:87> Calling original sd_probe() [ 61.463072] <redpill/scsi_notifier.c:91> Triggering SCSI_EVT_DEV_PROBED notifications - sd_probe() exit=0 [ 61.463258] sd 6:0:0:0: [synoboot] 15633408 512-byte logical blocks: (8.00 GB/7.45 GiB) [ 61.463469] sd 6:0:0:0: [synoboot] Write Protect is off [ 61.463470] sd 6:0:0:0: [synoboot] Mode Sense: 43 00 00 00 [ 61.463681] sd 6:0:0:0: [synoboot] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 61.466068] sd 6:0:0:0: [synoboot] Attached SCSI removable disk [ 67.308056] <redpill/smart_shim.c:934> sd_ioctl_canary triggered for first ioctl() [ 67.315702] <redpill/smart_shim.c:862> Rerouting sd_fops->ioctl<ffffffff8165f918>=sd_ioctl+0x0/0x210<ffffffff813f29b0> to sd_ioctl_smart_shim+0x0/0x90 [redpill]<ffffffffa000a300> [ 67.355245] <redpill/override_symbol.c:279> Restoring sd_ioctl<ffffffff813f29b0> to original code [ 67.376010] <redpill/override_symbol.c:250> Obtaining lock for <sd_ioctl+0x0/0x210/ffffffff813f29b0> [ 67.412732] <redpill/override_symbol.c:287> Successfully restored original code of sd_ioctl [ 67.421327] <redpill/override_symbol.c:145> Freeing OVS for sd_ioctl [ 67.427839] <redpill/smart_shim.c:971> Canary finished - routing to sd_fops->ioctl = sd_ioctl_smart_shim+0x0/0x90 [redpill]<ffffffffa000a300> [ 74.928383] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 74.928406] sd 6:0:0:0: Attached scsi generic sg1 type 0 [ 92.135623] BTRFS info (device dm-2): use ssd allocation scheme [21356.781168] <redpill/scsi_notifier.c:65> Probing SCSI device using sd_probe_shim [21356.796923] <redpill/scsi_notifier.c:87> Calling original sd_probe() [21356.806576] <redpill/scsi_notifier.c:91> Triggering SCSI_EVT_DEV_PROBED notifications - sd_probe() exit=0 [21356.806623] sd 7:0:1:0: [iscsi1] 209715200 512-byte logical blocks: (107 GB/100 GiB) [21356.806649] sd 7:0:1:0: [iscsi1] Write Protect is off [21356.806650] sd 7:0:1:0: [iscsi1] Mode Sense: 43 00 10 08 [21356.806673] sd 7:0:1:0: [iscsi1] Write cache: enabled, read cache: enabled, supports DPO and FUA [21356.835228] sd 7:0:1:0: [iscsi1] Attached SCSI disk [21356.852317] sd 7:0:1:0: Attached scsi generic sg2 type 0

here is my result for grep ahci [ 36.009717] <redpill/override_symbol.c:257> Overriding syno_ahci_disk_led_enable_by_port() with syno_ahci_disk_led_enable_by_port_shim [redpill]()<ffffffffa000c9d0> [ 36.205361] <redpill/override_symbol.c:172> Saved syno_ahci_disk_led_enable_by_port() ptr <ffffffff8142bc80> [ 36.484635] <redpill/override_symbol.c:221> Obtaining lock for <syno_ahci_disk_led_enable_by_port+0x0/0x20/ffffffff8142bc80> [ 36.712310] <redpill/override_symbol.c:188> Generated trampoline to syno_ahci_disk_led_enable_by_port_shim+0x0/0x40 [redpill]<ffffffffa000c9d0> for syno_ahci_disk_led_enable_by_port<ffffffff8142bc80>: [ 37.301517] <redpill/override_symbol.c:269> Successfully overrode syno_ahci_disk_led_enable_by_port() with trampoline to syno_ahci_disk_led_enable_by_port_shim+0x0/0x40 [redpill]<ffffffffa000c9d0> [ 58.869692] ahci 0000:00:17.0: version 3.0 [ 58.874065] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 58.882513] ahci 0000:00:17.0: flags: 64bit ncq sntf pm led clo only pio slum part ems deso sadm sds apst [ 58.929600] scsi host0: ahci [ 58.932622] scsi host1: ahci [ 58.935629] scsi host2: ahci [ 58.938594] scsi host3: ahci [ 58.941713] scsi host4: ahci [ 58.944700] scsi host5: ahci [ 58.994416] ahci: probe of 0001:01:00.0 failed with error -22 [ 65.745198] <redpill/bios_shims_collection.c:218> Received syno_ahci_disk_led_enable_by_port_shim with port=1 val=1 [ 65.756145] <redpill/bios_shims_collection.c:218> Received syno_ahci_disk_led_enable_by_port_shim with port=2 val=1 [ 65.766770] <redpill/bios_shims_collection.c:218> Received syno_ahci_disk_led_enable_by_port_shim with port=3 val=1 [ 65.777369] <redpill/bios_shims_collection.c:218> Received syno_ahci_disk_led_enable_by_port_shim with port=4 val=1 [ 79.918854] <redpill/bios_shims_collection.c:218> Received syno_ahci_disk_led_enable_by_port_shim with port=1 val=1 [ 79.918855] <redpill/bios_shims_collection.c:218> Received syno_ahci_disk_led_enable_by_port_shim with port=2 val=1 [ 79.918855] <redpill/bios_shims_collection.c:218> Received syno_ahci_disk_led_enable_by_port_shim with port=3 val=1 [ 79.918856] <redpill/bios_shims_collection.c:218> Received syno_ahci_disk_led_enable_by_port_shim with port=4 val=1

I'm current with DS920+, DSM 7.1-42661 Update 1, build with Redpill on diy build PC, MB GA-B150M-HD3 256Gb SSD i attached after install DSM finished, Bios can see 256Gb as well

Hi guys, Need help how to make Redpill reconize Esata 256Gb onboard during boot, my Xpenology could not reconize or not detect Esata disk onboard

with current Redpill method - manual build PC with Intel Core I5, 32 Gb, Sata 1TB - Motherboard B150M-HD3 Gigabyte SSD 2.5 sata 256Gb already attached onboard but xpenology could not reconize it Thank you

Hi guys, Need help, can i click update on control (Current DSM version is DSM 6.2-23739), its say "dsm 0.0.1-42218 is available for download", or you have method to migration to new version, and more question, can i add more physical drive (M-Sata 256Gb) to mainboard? Thank you

now i can install on my old pc, more question is - how to update DSM to latest version (is it neccessary?) - Active backup for gsuite (i can't see task list, it's empty) thank you

Please guide me how to update to new dsm latest version - current dsm is 6.2-23739 - custom pc with 32 Gb, old fasion cpu (can't remember) any future informat

need help after try on this method, Task List and Activities are empty