testcb00

As I have some Optane 16GB, I would like to use them as boot drive if possible.

Can I use NVMe as the ARPL drive?

Problem solved. I reboot the NAS and I can now shutdown by power button. ./rploader.sh update now && \ ./rploader.sh fullupgrade now && \ ./rploader.sh backup now && \ ./rploader.sh clean now && \ ./rploader.sh serialgen DS918+ && \ ./rploader.sh identifyusb now && \ ./rploader.sh satamap now && \ ./rploader.sh ext apollolake-7.1.0-42661 add \ https://github.com/pocopico/redpill-load/raw/develop/redpill-acpid/rpext-index.json && \ ./rploader.sh build apollolake-7.1.0-42661 && \ sudo rm -rf /home/tc/oldpat.tar.gz && \ sudo rm -rf /mnt/"$(mount | grep -i optional | grep cde | awk -F / '{print $3}' | uniq | cut -c 1-3)3"/auxfiles && \ sudo rm -rf /home/tc/custom-module && \ ./rploader.sh backup now

Thank you for your reply, rojoone2 Can you use the power button to poweroff the NAS?

Thank to pocopico's effort, I can install DSM 7.1 42661 on the ASRock Q1900B-ITX. However, I find that I am not able to use the power button to shutdown the NAS. Here is my code sudo ./rploader.sh update && \ sudo ./rploader.sh fullupgrade && \ sudo ./rploader.sh identifyusb && \ sudo ./rploader.sh serialgen DS918+ && \ sudo ./rploader.sh satamap && \ sudo ./rploader.sh ext apollolake-7.1.0-42661 add https://github.com/jumkey/redpill-load/raw/develop/redpill-acpid/rpext-index.json && \ sudo ./rploader.sh build apollolake-7.1.0-42661 && \ sudo ./rploader.sh clean now && \ sudo rm -rf /home/tc/oldpat.tar.gz && \ sudo rm -rf /mnt/"$(mount | grep -i optional | grep cde | awk -F / '{print $3}' | uniq | cut -c 1-3)3"/auxfiles && \ sudo rm -rf /home/tc/custom-module && \ sudo ./rploader.sh backup now After the backup, I unplug my router WAN. Then I can install DSM 7.1 using the official installation file DSM_DS918+_42661.pat Do my step wrong or DSM 7.1 do not allow power button to poweroff the NAS?

I solved the Bad Ports problem by Disable CSM and Enable Hot Plug. However, I cannot install DSM, the machine is in "Recover" loop. I have tried different models but no luck.

Hi, I want to try DSM using ASRock Q1900B-ITX but I find some issues. When I boot into Tinycore-Redpill, it shows nohup: redirecting stderr to stdout It seems that startx is failed. Luckily, I can access via PuTTY. Then, I use the scripts to edit the config and find that there are no SATA driver for 00:13.0 Intel Corporation Atom Processor E3800 Series SATA AHCI Controller (rev 0c) How to solve the problem?