Jump to content
XPEnology Community

scfrancis

Member
  • Posts

    46
  • Joined

  • Last visited

Everything posted by scfrancis

  1. Hello everyone, After updating SS, I lost the 8 licenses of my DVA-1622. I just modified the SN, trigram (UBR), and I found the 8 SS licenses!! Thank you so much @Orphée
  2. This log comes from a fresh install ! If you need don't hesitate ! Thanks for your help !!
  3. I have the same problem ! VM Proxmox, DVA1622 and no network...
  4. /dev/md0 /tmpRoot ext4 rw,relatime,prjquota,rootprjquota,data=ordered 0 0 none /sys/kernel/debug debugfs rw,relatime 0 0 [error]Failed to open /dev/dri/card0 addons.sh called with params jrExit [ 8.249806] VFS: opened file in mnt_point: (/dev), file: (/null), comm: (ash) [ 8.252809] VFS: opened file in mnt_point: (/dev), file: (/null), comm: (linuxrc.syno.im) [ 8.256179] VFS: opened file in mnt_point: (/dev), file: (/urandom), comm: (ttyd) umount: can't unmount /dev: Device or resource busy umount: /etc/mtab: No such file or directory [ 8.276546] VFS: opened file in mnt_point: (/dev), file: (/null), comm: (ash) [ 8.279866] VFS: opened file in mnt_point: (/dev), file: (/null), comm: (linuxrc.syno.im) [ 8.283612] VFS: opened file in mnt_point: (/dev), file: (/urandom), comm: (ttyd) linuxrc.syno failed on 7 starting pid 5390, tty '': '/etc/rc' :: Starting /etc/rc :: Mounting procfs ... [ OK ] :: Mounting tmpfs ... [ OK ] :: Mounting devtmpfs ... [FAILED] :: Mounting devpts ... [ OK ] :: Mounting sysfs ... [ OK ] [ 8.382264] md: md1 stopped. [ 8.384134] md: bind<sata1p2> [ 8.386687] md/raid1:md1: active with 1 out of 2 mirrors [ 8.400849] md1: detected capacity change from 0 to 2147418112 [ 8.441328] Adding 2097084k swap on /dev/md1. Priority:-1 extents:1 across:2097084k :: Loading module crc-ccitt ... [ OK ] :: Loading module crc-itu-t ... [ OK ] :: Loading module mdio ... [ OK ] :: Loading module fat ... [ OK ] :: Loading module vfat ... [ OK ] :: Loading module udp_tunnel ... [ OK ] :: Loading module ip6_udp_tunnel ... [ OK ] :: Loading module vxlan ... [ OK ] :: Loading module dca[ 8.670888] dca service started, version 1.12.1 ... [ OK ] :: Loading module e1000e[ 8.680456] e1000e: Intel(R) PRO/1000 Network Driver - 3.8.4-NAPI [ 8.682797] e1000e: Copyright(c) 1999 - 2020 Intel Corporation. ... [ OK ] :: Loading module igb[ 8.694639] Intel(R) Gigabit Ethernet Linux Driver - version 5.11.4 [ 8.697058] Copyright(c) 2007 - 2022 Intel Corporation. ... [ OK ] :: Loading module be2net ... [ OK ] :: Loading module ixgbe[ 8.716741] Intel(R) 10GbE PCI Express Linux Network Driver - version 5.16.5 [ 8.718549] Copyright(c) 1999 - 2022 Intel Corporation. ... [ OK ] :: Loading module r8168 ... [ OK ] :: Loading module i40e[ 8.742864] i40e: Unknown symbol auxiliary_device_init (err 0) [ 8.744467] i40e: Unknown symbol __auxiliary_device_add (err 0) [ 8.752790] i40e: Unknown symbol auxiliary_device_init (err 0) [ 8.754427] i40e: Unknown symbol __auxiliary_device_add (err 0) ... [FAILED] :: Loading module sunrpc[ 8.790494] RPC: Registered named UNIX socket transport module. [ 8.792059] RPC: Registered udp transport module. [ 8.793280] RPC: Registered tcp transport module. [ 8.794485] RPC: Registered tcp NFSv4.1 backchannel transport module. ... [ OK ] :: Loading module grace ... [ OK ] :: Loading module lockd ... [ OK ] :: Loading module nfs ... [ OK ] :: Loading module nfsv3 ... [ OK ] :: Loading module leds-lp3943 ... [ OK ] [ 8.890725] synobios open /dev/ttyS1 success [ 8.891866] Fail to get disk 1 led type [ 8.892865] Fail to get disk 2 led type [ 8.894023] 2022-9-9 6:25:9 UTC [ 8.894805] synobios: load, major number 201 [ 8.895892] Brand: Synology [ 8.896636] Model: DVA-1622 [ 8.897390] This is default settings: set group disks wakeup number to 1, spinup time deno 1 [ 8.899554] synobios cpu_arch proc entry initialized [ 8.900802] synobios crypto_hw proc entry initialized [ 8.902118] synobios syno_platform proc entry initialized mknod: /dev/synobios: File exists Starting SW init... [ 9.516431] Module [geminilake_synobios] is removed. [ 9.517911] synobios: unload :: Loading module synobios[ 9.564822] synobios open /dev/ttyS1 success [ 9.565965] Fail to get disk 1 led type [ 9.566944] Fail to get disk 2 led type [ 9.568151] 2022-9-9 6:25:10 UTC [ 9.568947] synobios: load, major number 201 [ 9.570063] Brand: Synology [ 9.570751] Model: DVA-1622 [ 9.571484] This is default settings: set group disks wakeup number to 1, spinup time deno 1 [ 9.573638] synobios cpu_arch proc entry initialized [ 9.574883] synobios crypto_hw proc entry initialized [ 9.576181] synobios syno_platform proc entry initialized ... [ OK ] lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) :: Starting syslogd ... [ OK ] :: Starting scemd :: Starting services in background Starting JuniorExpansionPack Starting findhostd in flash_rd... Starting services in flash_rd... Running /usr/syno/etc/rc.d/J01httpd.sh... Starting httpd:80 in flash_rd... Starting httpd:5000 in flash_rd... Running /usr/syno/etc/rc.d/J03ssdpd.sh... [ 16.872802] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities /usr/bin/minissdpd Usage: /usr/bin/minissdpd [-d] [-6] [-s socket] [-p pidfile] -i <interface> [-i <interface2>] ... <interface> is either an IPv4 address such as 192.168.1.42, or an interface name such as eth0. By default, socket will be open as /var/run/minissdpd.sock and pid written to file /var/run/minissdpd.pid start SSDPD failed Running /usr/syno/etc/rc.d/J04synoagentregisterd.sh... Starting synoagentregisterd... Running /usr/syno/etc/rc.d/J30DisableNCQ.sh... cat: can't open '/sys/block/sd*/device//model': No such file or directory [ 16.908418] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null) Running /usr/syno/etc/rc.d/J80ADTFanControl.sh... Running /usr/syno/etc/rc.d/J98nbnsd.sh... Starting nbnsd... Booting `Boot DSM' Loading kernel... Loading initramfs... Booting... [ 4.689348] tmpfs: Unknown parameter 'mode' mount: mounting tmpfs on /dev/shm failed: Invalid argument [ 4.691987] tmpfs: Unknown parameter 'mode' mount: mounting tmpfs on /tmp failed: Invalid argument [ 4.694319] tmpfs: Unknown parameter 'mode' mount: mounting tmpfs on /run failed: Invalid argument Starting syslogd: OK Starting acpid: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: done Saving random seed: OK Starting network: OK Starting dhcpcd... dhcpcd-9.4.1 starting dev: loaded udev DUID 00:04:77:f9:a8:51:04:04:44:69:ad:22:2c:7c:6d:48:76:08 forked to background, child pid 194 ssh-keygen: generating new host keys: RSA DSA ECDSA ED25519 Starting sshd: OK Starting SMB services: OK Starting NMB services: OK Please press Enter to activate this console. [2022/09/09 06:26:48:8294] N: ttyd 1.6.3 (libwebsockets 4.0.22) [2022/09/09 06:26:48:8295] N: tty configuration: [2022/09/09 06:26:48:8295] N: start command: login -f root [2022/09/09 06:26:48:8295] N: close signal: SIGHUP (1) [2022/09/09 06:26:48:8295] N: terminal type: xterm-256color [2022/09/09 06:26:48:8300] N: Using foreign event loop... [2022/09/09 06:26:48:8304] N: Listening on port: 7681 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.4.180+ (root@build13) (gcc version 8.5.0 (GCC) ) #42661 SMP Fri Apr 1 15:33:03 CST 2022 [ 0.000000] Command line: synoboot_satadom=2 dom_szmax=510 console=ttyS0,115200n8 earlyprintk log_buf_len=32M earlycon=uart8250,io,0x3f8,115200n8 elevator=elevator root=/dev/md0 loglevel=15 syno_hw_version=DVA1622 netif_num=1 synoboot2 pid=0x0000 syno_port_thaw=1 mac1=be1393a6d005 sn=2030SJRL79H7B HddEnableDynamicPower=1 vid=0x0000 intel_iommu=igfx_off vender_format_version=2 syno_ttyS1=serial,0x2f8 syno_ttyS0=serial,0x3f8 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers' [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000400-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffddfff] usable [ 0.000000] BIOS-e820: [mem 0x000000007ffde000-0x000000007fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027fffffff] usable [ 0.000000] earlycon: Early serial console at I/O port 0x3f8 (options '115200n8') [ 0.000000] bootconsole [uart0] enabled [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014 [ 0.000000] Kernel/User page tables isolation: disabled [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x280000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000C0000000 mask 3FFFC0000000 uncachable [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] e820: last_pfn = 0x7ffde max_arch_pfn = 0x400000000 [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 28672 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x27cc7a000, 0x27cc7afff] PGTABLE [ 0.000000] BRK [0x27cc7b000, 0x27cc7bfff] PGTABLE [ 0.000000] BRK [0x27cc7c000, 0x27cc7cfff] PGTABLE [ 0.000000] BRK [0x27cc7d000, 0x27cc7dfff] PGTABLE [ 0.000000] BRK [0x27cc7e000, 0x27cc7efff] PGTABLE [ 0.000000] log_buf_len: 33554432 bytes [ 0.000000] early log buf free: 127324(97%) [ 0.000000] RAMDISK: [mem 0x278898000-0x27c1fffff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F5960 000014 (v00 BOCHS ) [ 0.000000] ACPI: RSDT 0x000000007FFE4B2F 00003C (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.000000] ACPI: FACP 0x000000007FFE4845 0000F4 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.000000] ACPI: DSDT 0x000000007FFDF040 005805 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.000000] ACPI: FACS 0x000000007FFDF000 000040 [ 0.000000] ACPI: APIC 0x000000007FFE4939 000090 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.000000] ACPI: SSDT 0x000000007FFE49C9 0000CA (v01 BOCHS VMGENID 00000001 BXPC 00000001) [ 0.000000] ACPI: HPET 0x000000007FFE4A93 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.000000] ACPI: MCFG 0x000000007FFE4ACB 00003C (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.000000] ACPI: WAET 0x000000007FFE4B07 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000007ffddfff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000027fffffff] [ 0.000000] On node 0 totalpages: 2097020 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 22 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 8128 pages used for memmap [ 0.000000] DMA32 zone: 520158 pages, LIFO batch:31 [ 0.000000] Normal zone: 24576 pages used for memmap [ 0.000000] Normal zone: 1572864 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x608 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ5 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ10 used by override. [ 0.000000] ACPI: IRQ11 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x7ffde000-0x7fffffff] [ 0.000000] PM: Registered nosave memory: [mem 0x80000000-0xafffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xb0000000-0xbfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfeffbfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfeffc000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xfffbffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfffc0000-0xffffffff] [ 0.000000] e820: [mem 0xc0000000-0xfed1bfff] available for PCI devices [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 33 pages/cpu @ffff88027dc00000 s95128 r8192 d31848 u524288 [ 0.000000] pcpu-alloc: s95128 r8192 d31848 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2064230 [ 0.000000] Kernel command line: synoboot_satadom=2 dom_szmax=510 console=ttyS0,115200n8 earlyprintk log_buf_len=32M earlycon=uart8250,io,0x3f8,115200n8 elevator=elevator root=/dev/md0 loglevel=15 syno_hw_version=DVA1622 netif_num=1 synoboot2 pid=0x0000 syno_port_thaw=1 mac1=be1393a6d005 sn=2030SJRL79H7B HddEnableDynamicPower=1 vid=0x0000 intel_iommu=igfx_off vender_format_version=2 syno_ttyS1=serial,0x2f8 syno_ttyS0=serial,0x3f8 [ 0.000000] Synology Hardware Version: DVA1622 [ 0.000000] Internal netif num: 1 [ 0.000000] Mac1: be1393a6d005 [ 0.000000] Serial Number: 2030SJRL79H7B [ 0.000000] Support HDD Dynamic Power. [ 0.000000] DMAR: Disable GFX device mapping [ 0.000000] Vender format version: 2 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Memory: 8075596K/8388080K available (5554K kernel code, 867K rwdata, 1820K rodata, 968K init, 664K bss, 312484K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000] NR_IRQS:4352 nr_irqs:456 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1899.940 MHz processor [ 0.003010] Calibrating delay loop (skipped), value calculated using timer frequency.. 3799.88 BogoMIPS (lpj=1899940) [ 0.004698] pid_max: default: 32768 minimum: 301 [ 0.005028] ACPI: Core revision 20150930 [ 0.010344] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.012006] Security Framework initialized [ 0.013033] AppArmor: AppArmor initialized [ 0.014016] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.015008] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.017314] Initializing cgroup subsys io [ 0.018015] Initializing cgroup subsys memory [ 0.019024] Initializing cgroup subsys devices [ 0.020014] Initializing cgroup subsys freezer [ 0.021083] CPU: Physical Processor ID: 0 [ 0.022005] CPU: Processor Core ID: 0 [ 0.023130] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.024005] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.025016] Speculative Store Bypass: Vulnerable [ 0.030798] Freeing SMP alternatives memory: 24K [ 0.034856] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.044423] TSC deadline timer enabled [ 0.045000] smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2420 0 @ 1.90GHz (family: 0x6, model: 0x2d, stepping: 0x7) [ 0.045973] Performance Events: 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver. [ 0.047441] ... version: 2 [ 0.048006] ... bit width: 48 [ 0.048957] ... generic registers: 4 [ 0.049006] ... value mask: 0000ffffffffffff [ 0.050005] ... max period: 00007fffffffffff [ 0.051005] ... fixed-purpose events: 3 [ 0.051956] ... event mask: 000000070000000f [ 0.052615] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.054294] x86: Booting SMP configuration: [ 0.055007] .... node #0, CPUs: #1 #2 #3 [ 0.061041] x86: Booted up 1 node, 4 CPUs [ 0.062007] smpboot: Total of 4 processors activated (15199.52 BogoMIPS) [ 0.064200] devtmpfs: initialized [ 0.066031] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.067016] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.068246] pinctrl core: initialized pinctrl subsystem [ 0.069297] NET: Registered protocol family 16 [ 0.074020] cpuidle: using governor ladder [ 0.080014] cpuidle: using governor menu [ 0.081121] ACPI: bus type PCI registered [ 0.082265] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000) [ 0.083008] PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved in E820 [ 0.084019] PCI: Using configuration type 1 for base access [ 0.085494] perf_event_intel: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off [ 0.087462] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.093020] ACPI: Added _OSI(Module Device) [ 0.094040] ACPI: Added _OSI(Processor Device) [ 0.095041] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.096034] ACPI: Added _OSI(Processor Aggregator Device) [ 0.101583] ACPI: Interpreter enabled [ 0.103029] ACPI: (supports S0 S4 S5) [ 0.103924] ACPI: Using IOAPIC for interrupt routing [ 0.105084] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.123064] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.124024] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.126178] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability] [ 0.128130] PCI host bridge to bus 0000:00 [ 0.129009] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.131008] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.132009] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.134008] pci_bus 0000:00: root bus resource [mem 0x80000000-0xafffffff window] [ 0.136008] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] [ 0.138008] pci_bus 0000:00: root bus resource [mem 0x280000000-0xa7fffffff window] [ 0.139013] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.141095] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 [ 0.142796] pci 0000:00:01.0: [1234:1111] type 00 class 0x030000 [ 0.147081] pci 0000:00:01.0: reg 0x10: [mem 0xfb000000-0xfbffffff pref] [ 0.153075] pci 0000:00:01.0: reg 0x18: [mem 0xfea14000-0xfea14fff] [ 0.164082] pci 0000:00:01.0: reg 0x30: [mem 0xfea00000-0xfea0ffff pref] [ 0.168211] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300 [ 0.173354] pci 0000:00:1a.0: reg 0x20: [io 0x5040-0x505f] [ 0.178007] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300 [ 0.182407] pci 0000:00:1a.1: reg 0x20: [io 0x5060-0x507f] [ 0.188011] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300 [ 0.193014] pci 0000:00:1a.2: reg 0x20: [io 0x5080-0x509f] [ 0.196751] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320 [ 0.199799] pci 0000:00:1a.7: reg 0x10: [mem 0xfea15000-0xfea15fff] [ 0.206058] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300 [ 0.207908] pci 0000:00:1b.0: reg 0x10: [mem 0xfea10000-0xfea13fff] [ 0.215557] pci 0000:00:1c.0: [1b36:000c] type 01 class 0x060400 [ 0.218010] pci 0000:00:1c.0: reg 0x10: [mem 0xfea16000-0xfea16fff] [ 0.224968] pci 0000:00:1c.1: [1b36:000c] type 01 class 0x060400 [ 0.228011] pci 0000:00:1c.1: reg 0x10: [mem 0xfea17000-0xfea17fff] [ 0.233949] pci 0000:00:1c.2: [1b36:000c] type 01 class 0x060400 [ 0.237010] pci 0000:00:1c.2: reg 0x10: [mem 0xfea18000-0xfea18fff] [ 0.242624] pci 0000:00:1c.3: [1b36:000c] type 01 class 0x060400 [ 0.246633] pci 0000:00:1c.3: reg 0x10: [mem 0xfea19000-0xfea19fff] [ 0.250927] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 [ 0.258012] pci 0000:00:1d.0: reg 0x20: [io 0x50a0-0x50bf] [ 0.260707] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 [ 0.267012] pci 0000:00:1d.1: reg 0x20: [io 0x50c0-0x50df] [ 0.270680] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 [ 0.277691] pci 0000:00:1d.2: reg 0x20: [io 0x50e0-0x50ff] [ 0.280739] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 [ 0.282751] pci 0000:00:1d.7: reg 0x10: [mem 0xfea1a000-0xfea1afff] [ 0.291060] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 0.294535] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 [ 0.297813] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO [ 0.301450] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 [ 0.309013] pci 0000:00:1f.2: reg 0x20: [io 0x5100-0x511f] [ 0.313026] pci 0000:00:1f.2: reg 0x24: [mem 0xfea1b000-0xfea1bfff] [ 0.316580] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 [ 0.322738] pci 0000:00:1f.3: reg 0x20: [io 0x0700-0x073f] [ 0.326382] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.328038] pci 0000:00:1c.0: bridge window [io 0x6000-0x6fff] [ 0.329037] pci 0000:00:1c.0: bridge window [mem 0xfe800000-0xfe9fffff] [ 0.331063] pci 0000:00:1c.0: bridge window [mem 0xfce00000-0xfcffffff 64bit pref] [ 0.335170] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 0.337039] pci 0000:00:1c.1: bridge window [io 0x7000-0x7fff] [ 0.338037] pci 0000:00:1c.1: bridge window [mem 0xfe600000-0xfe7fffff] [ 0.340063] pci 0000:00:1c.1: bridge window [mem 0xfcc00000-0xfcdfffff 64bit pref] [ 0.343145] pci 0000:00:1c.2: PCI bridge to [bus 03] [ 0.344044] pci 0000:00:1c.2: bridge window [io 0x8000-0x8fff] [ 0.346039] pci 0000:00:1c.2: bridge window [mem 0xfe400000-0xfe5fffff] [ 0.347063] pci 0000:00:1c.2: bridge window [mem 0xfca00000-0xfcbfffff 64bit pref] [ 0.350154] pci 0000:00:1c.3: PCI bridge to [bus 04] [ 0.352038] pci 0000:00:1c.3: bridge window [io 0x9000-0x9fff] [ 0.354040] pci 0000:00:1c.3: bridge window [mem 0xfe200000-0xfe3fffff] [ 0.356080] pci 0000:00:1c.3: bridge window [mem 0xfc800000-0xfc9fffff 64bit pref] [ 0.359207] pci 0000:05:01.0: [1b36:0001] type 01 class 0x060400 [ 0.362010] pci 0000:05:01.0: reg 0x10: [mem 0xfe000000-0xfe0000ff 64bit] [ 0.367060] pci 0000:05:02.0: [1b36:0001] type 01 class 0x060400 [ 0.370010] pci 0000:05:02.0: reg 0x10: [mem 0xfe001000-0xfe0010ff 64bit] [ 0.374873] pci 0000:05:03.0: [1b36:0001] type 01 class 0x060400 [ 0.377649] pci 0000:05:03.0: reg 0x10: [mem 0xfe002000-0xfe0020ff 64bit] [ 0.381882] pci 0000:05:04.0: [1b36:0001] type 01 class 0x060400 [ 0.385781] pci 0000:05:04.0: reg 0x10: [mem 0xfe003000-0xfe0030ff 64bit] [ 0.389158] pci 0000:00:1e.0: PCI bridge to [bus 05-09] (subtractive decode) [ 0.391038] pci 0000:00:1e.0: bridge window [io 0x1000-0x4fff] [ 0.393037] pci 0000:00:1e.0: bridge window [mem 0xfd800000-0xfe1fffff] [ 0.394084] pci 0000:00:1e.0: bridge window [mem 0xfc000000-0xfc7fffff 64bit pref] [ 0.397011] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.399009] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.401010] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.404009] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xafffffff window] (subtractive decode) [ 0.406009] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff window] (subtractive decode) [ 0.408008] pci 0000:00:1e.0: bridge window [mem 0x280000000-0xa7fffffff window] (subtractive decode) [ 0.411066] pci 0000:06:07.0: [8086:2922] type 00 class 0x010601 [ 0.419611] pci 0000:06:07.0: reg 0x20: [io 0x4000-0x401f] [ 0.422009] pci 0000:06:07.0: reg 0x24: [mem 0xfde40000-0xfde40fff] [ 0.426105] pci 0000:06:12.0: [1af4:1000] type 00 class 0x020000 [ 0.430856] pci 0000:06:12.0: reg 0x10: [io 0x4020-0x403f] [ 0.434009] pci 0000:06:12.0: reg 0x14: [mem 0xfde41000-0xfde41fff] [ 0.443902] pci 0000:06:12.0: reg 0x20: [mem 0xfc600000-0xfc603fff 64bit pref] [ 0.447010] pci 0000:06:12.0: reg 0x30: [mem 0xfde00000-0xfde3ffff pref] [ 0.450077] pci 0000:05:01.0: PCI bridge to [bus 06] [ 0.451036] pci 0000:05:01.0: bridge window [io 0x4000-0x4fff] [ 0.454051] pci 0000:05:01.0: bridge window [mem 0xfde00000-0xfdffffff] [ 0.455062] pci 0000:05:01.0: bridge window [mem 0xfc600000-0xfc7fffff 64bit pref] [ 0.458492] pci 0000:05:02.0: PCI bridge to [bus 07] [ 0.460037] pci 0000:05:02.0: bridge window [io 0x3000-0x3fff] [ 0.461035] pci 0000:05:02.0: bridge window [mem 0xfdc00000-0xfddfffff] [ 0.463062] pci 0000:05:02.0: bridge window [mem 0xfc400000-0xfc5fffff 64bit pref] [ 0.465439] pci 0000:05:03.0: PCI bridge to [bus 08] [ 0.467036] pci 0000:05:03.0: bridge window [io 0x2000-0x2fff] [ 0.468035] pci 0000:05:03.0: bridge window [mem 0xfda00000-0xfdbfffff] [ 0.470061] pci 0000:05:03.0: bridge window [mem 0xfc200000-0xfc3fffff 64bit pref] [ 0.474480] pci 0000:05:04.0: PCI bridge to [bus 09] [ 0.475037] pci 0000:05:04.0: bridge window [io 0x1000-0x1fff] [ 0.477036] pci 0000:05:04.0: bridge window [mem 0xfd800000-0xfd9fffff] [ 0.480074] pci 0000:05:04.0: bridge window [mem 0xfc000000-0xfc1fffff 64bit pref] [ 0.488702] pci_bus 0000:00: on NUMA node 0 [ 0.491082] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11), disabled. [ 0.494584] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11), disabled. [ 0.495686] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11), disabled. [ 0.497695] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11), disabled. [ 0.499677] ACPI: PCI Interrupt Link [LNKE] (IRQs 5 *10 11), disabled. [ 0.500681] ACPI: PCI Interrupt Link [LNKF] (IRQs 5 *10 11), disabled. [ 0.502684] ACPI: PCI Interrupt Link [LNKG] (IRQs 5 10 *11), disabled. [ 0.504689] ACPI: PCI Interrupt Link [LNKH] (IRQs 5 10 *11), disabled. [ 0.505624] ACPI: PCI Interrupt Link [GSIA] (IRQs *16) [ 0.507218] ACPI: PCI Interrupt Link [GSIB] (IRQs *17) [ 0.508210] ACPI: PCI Interrupt Link [GSIC] (IRQs *18) [ 0.510215] ACPI: PCI Interrupt Link [GSID] (IRQs *19) [ 0.511212] ACPI: PCI Interrupt Link [GSIE] (IRQs *20) [ 0.512217] ACPI: PCI Interrupt Link [GSIF] (IRQs *21) [ 0.513209] ACPI: PCI Interrupt Link [GSIG] (IRQs *22) [ 0.515217] ACPI: PCI Interrupt Link [GSIH] (IRQs *23) [ 0.517000] ACPI: Enabled 3 GPEs in block 00 to 3F [ 0.519075] vgaarb: setting as boot device: PCI:0000:00:01.0 [ 0.520000] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none [ 0.522019] vgaarb: loaded [ 0.522666] vgaarb: bridge control possible 0000:00:01.0 [ 0.524297] SCSI subsystem initialized [ 0.525149] libata version 3.00 loaded. [ 0.526265] pps_core: LinuxPPS API ver. 1 registered [ 0.528022] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 0.530061] PTP clock support registered [ 0.532003] PCI: Using ACPI for IRQ routing [ 0.644968] PCI: pci_cache_line_size set to 64 bytes [ 0.646707] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.648013] e820: reserve RAM buffer [mem 0x7ffde000-0x7fffffff] [ 0.650146] clocksource: Switched to clocksource hpet [ 0.693171] AppArmor: AppArmor Filesystem Enabled [ 0.695251] pnp: PnP ACPI init [ 0.696836] pnp 00:00: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.699689] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.701767] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.703947] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.706402] system 00:04: [mem 0xb0000000-0xbfffffff window] has been reserved [ 0.708595] system 00:04: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.710956] pnp: PnP ACPI: found 5 devices [ 0.738898] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.754181] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.755647] pci 0000:00:1c.0: bridge window [io 0x6000-0x6fff] [ 0.758827] pci 0000:00:1c.0: bridge window [mem 0xfe800000-0xfe9fffff] [ 0.761843] pci 0000:00:1c.0: bridge window [mem 0xfce00000-0xfcffffff 64bit pref] [ 0.766717] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 0.768343] pci 0000:00:1c.1: bridge window [io 0x7000-0x7fff] [ 0.771361] pci 0000:00:1c.1: bridge window [mem 0xfe600000-0xfe7fffff] [ 0.774865] pci 0000:00:1c.1: bridge window [mem 0xfcc00000-0xfcdfffff 64bit pref] [ 0.778901] pci 0000:00:1c.2: PCI bridge to [bus 03] [ 0.780529] pci 0000:00:1c.2: bridge window [io 0x8000-0x8fff] [ 0.783634] pci 0000:00:1c.2: bridge window [mem 0xfe400000-0xfe5fffff] [ 0.787297] pci 0000:00:1c.2: bridge window [mem 0xfca00000-0xfcbfffff 64bit pref] [ 0.791269] pci 0000:00:1c.3: PCI bridge to [bus 04] [ 0.792795] pci 0000:00:1c.3: bridge window [io 0x9000-0x9fff] [ 0.795865] pci 0000:00:1c.3: bridge window [mem 0xfe200000-0xfe3fffff] [ 0.799430] pci 0000:00:1c.3: bridge window [mem 0xfc800000-0xfc9fffff 64bit pref] [ 0.803490] pci 0000:05:01.0: PCI bridge to [bus 06] [ 0.804989] pci 0000:05:01.0: bridge window [io 0x4000-0x4fff] [ 0.808849] pci 0000:05:01.0: bridge window [mem 0xfde00000-0xfdffffff] [ 0.811773] pci 0000:05:01.0: bridge window [mem 0xfc600000-0xfc7fffff 64bit pref] [ 0.815846] pci 0000:05:02.0: PCI bridge to [bus 07] [ 0.817878] pci 0000:05:02.0: bridge window [io 0x3000-0x3fff] [ 0.820636] pci 0000:05:02.0: bridge window [mem 0xfdc00000-0xfddfffff] [ 0.823095] pci 0000:05:02.0: bridge window [mem 0xfc400000-0xfc5fffff 64bit pref] [ 0.826583] pci 0000:05:03.0: PCI bridge to [bus 08] [ 0.828712] pci 0000:05:03.0: bridge window [io 0x2000-0x2fff] [ 0.831851] pci 0000:05:03.0: bridge window [mem 0xfda00000-0xfdbfffff] [ 0.834897] pci 0000:05:03.0: bridge window [mem 0xfc200000-0xfc3fffff 64bit pref] [ 0.839697] pci 0000:05:04.0: PCI bridge to [bus 09] [ 0.841499] pci 0000:05:04.0: bridge window [io 0x1000-0x1fff] [ 0.844172] pci 0000:05:04.0: bridge window [mem 0xfd800000-0xfd9fffff] [ 0.846655] pci 0000:05:04.0: bridge window [mem 0xfc000000-0xfc1fffff 64bit pref] [ 0.850834] pci 0000:00:1e.0: PCI bridge to [bus 05-09] [ 0.852248] pci 0000:00:1e.0: bridge window [io 0x1000-0x4fff] [ 0.854853] pci 0000:00:1e.0: bridge window [mem 0xfd800000-0xfe1fffff] [ 0.857338] pci 0000:00:1e.0: bridge window [mem 0xfc000000-0xfc7fffff 64bit pref] [ 0.861713] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.863404] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.864942] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.866696] pci_bus 0000:00: resource 7 [mem 0x80000000-0xafffffff window] [ 0.868395] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window] [ 0.870225] pci_bus 0000:00: resource 9 [mem 0x280000000-0xa7fffffff window] [ 0.871958] pci_bus 0000:01: resource 0 [io 0x6000-0x6fff] [ 0.873400] pci_bus 0000:01: resource 1 [mem 0xfe800000-0xfe9fffff] [ 0.874956] pci_bus 0000:01: resource 2 [mem 0xfce00000-0xfcffffff 64bit pref] [ 0.876779] pci_bus 0000:02: resource 0 [io 0x7000-0x7fff] [ 0.878423] pci_bus 0000:02: resource 1 [mem 0xfe600000-0xfe7fffff] [ 0.880567] pci_bus 0000:02: resource 2 [mem 0xfcc00000-0xfcdfffff 64bit pref] [ 0.882891] pci_bus 0000:03: resource 0 [io 0x8000-0x8fff] [ 0.884823] pci_bus 0000:03: resource 1 [mem 0xfe400000-0xfe5fffff] [ 0.886890] pci_bus 0000:03: resource 2 [mem 0xfca00000-0xfcbfffff 64bit pref] [ 0.889277] pci_bus 0000:04: resource 0 [io 0x9000-0x9fff] [ 0.891060] pci_bus 0000:04: resource 1 [mem 0xfe200000-0xfe3fffff] [ 0.893429] pci_bus 0000:04: resource 2 [mem 0xfc800000-0xfc9fffff 64bit pref] [ 0.896333] pci_bus 0000:05: resource 0 [io 0x1000-0x4fff] [ 0.898593] pci_bus 0000:05: resource 1 [mem 0xfd800000-0xfe1fffff] [ 0.900786] pci_bus 0000:05: resource 2 [mem 0xfc000000-0xfc7fffff 64bit pref] [ 0.903406] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7 window] [ 0.905626] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff window] [ 0.907902] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.910441] pci_bus 0000:05: resource 7 [mem 0x80000000-0xafffffff window] [ 0.913425] pci_bus 0000:05: resource 8 [mem 0xc0000000-0xfebfffff window] [ 0.915826] pci_bus 0000:05: resource 9 [mem 0x280000000-0xa7fffffff window] [ 0.918405] pci_bus 0000:06: resource 0 [io 0x4000-0x4fff] [ 0.920454] pci_bus 0000:06: resource 1 [mem 0xfde00000-0xfdffffff] [ 0.922685] pci_bus 0000:06: resource 2 [mem 0xfc600000-0xfc7fffff 64bit pref] [ 0.925347] pci_bus 0000:07: resource 0 [io 0x3000-0x3fff] [ 0.927338] pci_bus 0000:07: resource 1 [mem 0xfdc00000-0xfddfffff] [ 0.929584] pci_bus 0000:07: resource 2 [mem 0xfc400000-0xfc5fffff 64bit pref] [ 0.932189] pci_bus 0000:08: resource 0 [io 0x2000-0x2fff] [ 0.934166] pci_bus 0000:08: resource 1 [mem 0xfda00000-0xfdbfffff] [ 0.936473] pci_bus 0000:08: resource 2 [mem 0xfc200000-0xfc3fffff 64bit pref] [ 0.939054] pci_bus 0000:09: resource 0 [io 0x1000-0x1fff] [ 0.941052] pci_bus 0000:09: resource 1 [mem 0xfd800000-0xfd9fffff] [ 0.943036] pci_bus 0000:09: resource 2 [mem 0xfc000000-0xfc1fffff 64bit pref] [ 0.944982] NET: Registered protocol family 2 [ 0.946481] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.948788] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.951277] TCP: Hash tables configured (established 65536 bind 65536) [ 0.953077] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.955329] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.957862] NET: Registered protocol family 1 [ 0.959637] pci 0000:00:01.0: Video device with shadowed ROM [ 0.962248] ACPI: PCI Interrupt Link [GSIA] enabled at IRQ 16 [ 0.965196] ACPI: PCI Interrupt Link [GSIB] enabled at IRQ 17 [ 0.967928] ACPI: PCI Interrupt Link [GSIC] enabled at IRQ 18 [ 0.970688] ACPI: PCI Interrupt Link [GSID] enabled at IRQ 19 [ 0.977878] PCI: CLS 64 bytes, default 64 [ 2.800922] Trying to unpack rootfs image as initramfs... [ 2.901511] Freeing initrd memory: 58784K [ 2.905651] redpill: loading out-of-tree module taints kernel. [ 2.907591] redpill: module verification failed: signature and/or required key missing - tainting kernel [ 2.936684] PCI host bridge to bus 0001:01 [ 2.937885] pci_bus 0001:01: root bus resource [io 0x0000-0xffff] [ 2.940003] pci_bus 0001:01: root bus resource [mem 0x00000000-0x3fffffffffff] [ 2.942804] pci_bus 0001:01: root bus resource [bus 00-ff] [ 2.944826] pci 0001:01:00.0: [1b4b:9235] type 00 class 0x010601 [ 2.947162] pci 0001:01:00.0: Can't map mv9235 registers [ 2.967969] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 2.970356] software IO TLB: mapped [mem 0x7bfde000-0x7ffde000] (64MB) [ 2.972889] RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 10737418240 ms ovfl timer [ 2.976157] hw unit of domain pp0-core 2^-0 Joules [ 2.977901] hw unit of domain package 2^-0 Joules [ 2.979599] hw unit of domain dram 2^-0 Joules [ 2.982974] audit: initializing netlink subsys (disabled) [ 2.984896] audit: type=2000 audit(1662704819.984:1): initialized [ 2.987429] Initialise system trusted keyring [ 3.060382] VFS: Disk quotas dquot_6.6.0 [ 3.062257] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 3.187157] Key type asymmetric registered [ 3.188992] Asymmetric key parser 'x509' registered [ 3.191310] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 3.194611] io scheduler noop registered [ 3.196397] io scheduler deadline registered [ 3.198419] io scheduler cfq registered (default) [ 3.213961] aer 0000:00:1c.0:pcie02: service driver aer loaded [ 3.216866] aer 0000:00:1c.1:pcie02: service driver aer loaded [ 3.219727] aer 0000:00:1c.2:pcie02: service driver aer loaded [ 3.222503] aer 0000:00:1c.3:pcie02: service driver aer loaded [ 3.225188] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt [ 3.228227] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded [ 3.231179] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt [ 3.234277] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded [ 3.237231] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt [ 3.240279] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded [ 3.243274] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt [ 3.246365] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded [ 3.668272] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 3.700115] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 3.703474] console [ttyS0] enabled [ 3.703474] console [ttyS0] enabled [ 3.706516] bootconsole [uart0] disabled [ 3.706516] bootconsole [uart0] disabled [ 3.845897] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 3.849790] Linux agpgart interface v0.103 [ 3.857964] brd: module loaded [ 3.859376] lpc_ich 0000:00:1f.0: I/O space for GPIO uninitialized [ 3.861559] Loading iSCSI transport class v2.0-870. [ 3.873581] ahci 0000:00:1f.2: version 3.0 [ 3.876424] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode [ 3.878529] ahci 0000:00:1f.2: flags: 64bit ncq only [ 3.880725] Cannot find slot node of this ata_port. [ 3.882544] Cannot find slot node of this ata_port. [ 3.884419] Cannot find slot node of this ata_port. [ 3.886192] Cannot find slot node of this ata_port. [ 3.888084] Cannot find slot node of this ata_port. [ 3.889892] Cannot find slot node of this ata_port. [ 3.952857] scsi host0: ahci [ 3.961344] scsi host1: ahci [ 3.964941] scsi host2: ahci [ 3.967769] scsi host3: ahci [ 3.970371] scsi host4: ahci [ 3.973870] scsi host5: ahci [ 3.974824] ata1 : SATA max UDMA/133 abar m4096@0xfea1b000 port 0xfea1b100 irq 28 [ 3.976767] ata2 : SATA max UDMA/133 abar m4096@0xfea1b000 port 0xfea1b180 irq 28 [ 3.979313] ata3 : SATA max UDMA/133 abar m4096@0xfea1b000 port 0xfea1b200 irq 28 [ 3.981965] ata4 : SATA max UDMA/133 abar m4096@0xfea1b000 port 0xfea1b280 irq 28 [ 3.983364] tsc: Refined TSC clocksource calibration: 1900.003 MHz [ 3.983367] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x36c65d91a72, max_idle_ns: 881590606376 ns [ 3.990381] ata5 : SATA max UDMA/133 abar m4096@0xfea1b000 port 0xfea1b300 irq 28 [ 3.993089] ata6 : SATA max UDMA/133 abar m4096@0xfea1b000 port 0xfea1b380 irq 28 [ 3.997347] ACPI: PCI Interrupt Link [GSIF] enabled at IRQ 21 [ 4.000734] ACPI: PCI Interrupt Link [GSIE] enabled at IRQ 20 [ 4.004065] ahci 0000:06:07.0: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode [ 4.006973] ahci 0000:06:07.0: flags: 64bit ncq only [ 4.009618] Cannot find slot node of this ata_port. [ 4.011578] Cannot find slot node of this ata_port. [ 4.013532] Cannot find slot node of this ata_port. [ 4.015467] Cannot find slot node of this ata_port. [ 4.017403] Cannot find slot node of this ata_port. [ 4.019282] Cannot find slot node of this ata_port. [ 4.025730] scsi host6: ahci [ 4.031458] scsi host7: ahci [ 4.039837] scsi host8: ahci [ 4.044757] scsi host9: ahci [ 4.047483] scsi host10: ahci [ 4.049198] scsi host11: ahci [ 4.050908] ata7 : SATA max UDMA/133 abar m4096@0xfde40000 port 0xfde40100 irq 29 [ 4.053564] ata8 : SATA max UDMA/133 abar m4096@0xfde40000 port 0xfde40180 irq 29 [ 4.056179] ata9 : SATA max UDMA/133 abar m4096@0xfde40000 port 0xfde40200 irq 29 [ 4.058263] ata10 : SATA max UDMA/133 abar m4096@0xfde40000 port 0xfde40280 irq 29 [ 4.060887] ata11 : SATA max UDMA/133 abar m4096@0xfde40000 port 0xfde40300 irq 29 [ 4.063679] ata12 : SATA max UDMA/133 abar m4096@0xfde40000 port 0xfde40380 irq 29 [ 4.066585] ahci: probe of 0001:01:00.0 failed with error -22 [ 4.068665] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 4.072526] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 4.074350] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 4.076737] mousedev: PS/2 mouse device common for all mice [ 4.078480] i2c /dev entries driver [ 4.080346] i801_smbus 0000:00:1f.3: SMBus using polling [ 4.084132] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 4.087705] evbug: Connected device: input0 (AT Translated Set 2 keyboard at isa0060/serio0/input0) [ 4.095426] md: raid1 personality registered for level 1 [ 4.097563] NET: Registered protocol family 17 [ 4.099317] Key type dns_resolver registered [ 4.107525] mce: Using 10 MCE banks [ 4.112170] registered taskstats version 1 [ 4.114156] Loading compiled-in untrusted X.509 certificates [ 4.117128] Loading compiled-in X.509 certificates [ 4.119558] Loaded X.509 cert 'Synology SDG kernel module signing key: 7bd0b0d6bcd31651c22ce3978bdc8c8bdc417329' [ 4.127244] Loaded X.509 cert 'Synology Root Certification Authority: f2c075361f168425f8b5ef31b796406c3aab2089' [ 4.132144] Loaded X.509 cert 'Synology Kernel Module Signing Certification Authority: 600839b5d127e0e11d817a31f0575d323a7c0e28' [ 4.137824] Loaded X.509 cert 'Synology kernel module signing key: 4646ce54489669338118a3b1286da156ac366fa5' [ 4.142710] page_owner is disabled [ 4.144494] AppArmor: AppArmor sha1 policy hashing enabled [ 4.150152] hctosys: unable to open rtc device (rtc0) [ 4.302444] ata2 : SATA link down (SStatus 0 SControl 300) [ 4.304914] ata2 : No present pin info for SATA link down event [ 4.308142] ata4 : SATA link down (SStatus 0 SControl 300) [ 4.310055] ata4 : No present pin info for SATA link down event [ 4.312094] ata6 : SATA link down (SStatus 0 SControl 300) [ 4.314240] ata6 : No present pin info for SATA link down event [ 4.316906] ata3 : SATA link down (SStatus 0 SControl 300) [ 4.319459] ata3 : No present pin info for SATA link down event [ 4.322708] ata5 : SATA link down (SStatus 0 SControl 300) [ 4.324110] ata5 : No present pin info for SATA link down event [ 4.325912] ata1 : SATA link down (SStatus 0 SControl 300) [ 4.327433] ata1 : No present pin info for SATA link down event [ 4.374318] ata12 : SATA link down (SStatus 0 SControl 300) [ 4.376798] ata12 : No present pin info for SATA link down event [ 4.379977] ata7 : SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 4.382495] ata9 : SATA link down (SStatus 0 SControl 300) [ 4.384709] ata9 : No present pin info for SATA link down event [ 4.387424] ata8 : SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 4.390610] ata7.00 : ATA-7: QEMU HARDDISK, 2.5+, max UDMA/100 [ 4.392599] ata7.00 : 1024000 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 4.394797] ata7.00 : SN:QM00013 [ 4.395930] ata7.00 : applying bridge limits [ 4.397490] ata8.00 : ATA-7: QEMU HARDDISK, 2.5+, max UDMA/100 [ 4.400258] ata8.00 : 2097152000 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 4.403499] ata8.00 : SN:QM00015 [ 4.405106] ata8.00 : applying bridge limits [ 4.407667] ata11 : SATA link down (SStatus 0 SControl 300) [ 4.409152] ata11 : No present pin info for SATA link down event [ 4.410757] ata7.00 : configured for UDMA/100 [ 4.412358] ata8.00 : configured for UDMA/100 [ 4.412632] ata7.00 : Find SSD disks. [QEMU HARDDISK] [ 4.414721] scsi 6:0:0:0: Direct-Access QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5 [ 4.422089] ata10 : SATA link down (SStatus 0 SControl 300) [ 4.423533] ata10 : No present pin info for SATA link down event [ 4.424978] sd 6:0:0:0: [synoboot] 1024000 512-byte logical blocks: (524 MB/500 MiB) [ 4.424997] ata8.00 : Find SSD disks. [QEMU HARDDISK] [ 4.425672] sd 6:0:0:0: [synoboot] Write Protect is off [ 4.425674] sd 6:0:0:0: [synoboot] Mode Sense: 00 3a 00 00 [ 4.426237] scsi 7:0:0:0: Direct-Access QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5 [ 4.426757] Cannot find slot node of this ata_port. [ 4.426759] got SATA disk[0] [ 4.427262] sd 7:0:0:0: [sata1] 2097152000 512-byte logical blocks: (1.07 TB/1000 GiB) [ 4.427663] sd 7:0:0:0: [sata1] Write Protect is off [ 4.427665] sd 7:0:0:0: [sata1] Mode Sense: 00 3a 00 00 [ 4.427780] sd 7:0:0:0: [sata1] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.428238] sd 6:0:0:0: [synoboot] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.430671] sata1: p1 p2 p3 < p5 > [ 4.433616] synoboot: synoboot1 synoboot2 synoboot3 [ 4.433960] sd 7:0:0:0: [sata1] Attached SCSI disk [ 4.434859] sd 6:0:0:0: [synoboot] Attached SCSI disk [ 4.457666] Freeing unused kernel memory: 968K [ 4.458983] Write protecting the kernel read-only data: 8192k [ 4.461875] Freeing unused kernel memory: 580K [ 4.464291] Freeing unused kernel memory: 228K START /linuxrc.syno START /linuxrc.syno.impl [ 4.643071] random: nonblocking pool is initialized addons.sh called with params early Starting ttyd... [2022/09/09 06:27:01:7081] N: ttyd 1.7.0-3ba994a (libwebsockets 4.3.2-unknown) [2022/09/09 06:27:01:7082] N: tty configuration: [2022/09/09 06:27:01:7082] N: start command: /usr/bin/ash [2022/09/09 06:27:01:7082] N: close signal: SIGHUP (1) [2022/09/09 06:27:01:7083] N: terminal type: xterm-256color [2022/09/09 06:27:01:7083] N: lws_create_context: LWS: 4.3.2-unknown, NET SRV H1 WS MbedTLS ConMon IPV6-off [2022/09/09 06:27:01:7086] N: elops_init_pt_uv: Using foreign event loop... [2022/09/09 06:27:01:7087] N: __lws_lc_tag: ++ [wsi|0|pipe] (1) [2022/09/09 06:27:01:7088] N: __lws_lc_tag: ++ [vh|0|netlink] (1) [2022/09/09 06:27:01:7089] N: __lws_lc_tag: ++ [vh|1|default||7681] (2) [2022/09/09 06:27:01:7092] N: [vh|1|default||7681]: lws_socket_bind: source ads 0.0.0.0 [2022/09/09 06:27:01:7092] N: __lws_lc_tag: ++ [wsi|1|listen|d[ 4.759980] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 e[ 4.762111] evbug: Connected device: input2 (Power Button at LNXPWRBN/button/input0) [ 4.764097] ACPI: Power Button [PWRF] fault||7681] (2) [2022/09/09 06:27:01:7093] N: Listening on port: 7681 '/etc.defaults/model.dtb' -> '/var/run/model.dtb' Insert HDMI Audio driver [error]Failed to open /dev/dri/card0 Insert basic USB modules... [ 4.853165] snd_hda_intel 0000:00:1b.0: no codecs found! :: Loading module usb-common ... [ OK ] :: Loading module usbcore [ 4.896210] ACPI: bus type USB registered [ 4.898427] usbcore: registered new interface driver usbfs [ 4.901390] usbcore: registered new interface driver hub [ 4.904342] usbcore: registered new interface driver ethub [ 4.907216] usbcore: registered new device driver usb ... [ OK ] :: Loading module ehci-hcd [ 4.928839] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ... [ OK ] :: Loading module ehci-pci [ 4.941427] ehci-pci: EHCI PCI platform driver [ 4.944452] ehci-pci 0000:00:1a.7: EHCI Host Controller [ 4.946735] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 4.950282] ehci-pci 0000:00:1a.7: irq 19, io mem 0xfea15000 [ 4.958224] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 4.962196] hub 1-0:1.0: USB hub found [ 4.964179] hub 1-0:1.0: 6 ports detected [ 4.968157] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 4.970424] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 4.973583] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfea1a000 [ 4.982142] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 4.985585] clocksource: Switched to clocksource tsc [ 4.985947] hub 2-0:1.0: USB hub found [ 4.985964] hub 2-0:1.0: 6 ports detected ... [ OK ] :: Loading module xhci-hcd ... [ OK ] :: Loading module xhci-pci ... [ OK ] addons.sh called with params modules Starting eudev daemon /addons/eudev.sh: line 6: /sbin/udevd: not found FAIL Loading 9p module modprobe: FATAL: Module 9p not found in directory /lib/modules modprobe: FATAL: Module 9pnet_virtio n [ 5.065202] geminilake_synobios: module license 'Synology Inc.' taints kernel. [ 5.067966] Disabling lock debugging due to kernel taint ot found in directory /lib/modules [ 5.075909] synobios open /dev/ttyS1 success [ 5.077510] Fail to get disk 1 led type [ 5.079010] Fail to get disk 2 led type [ 5.080529] 2022-9-9 6:27:2 UTC [ 5.081320] synobios: load, major number 201 [ 5.082367] Brand: Synology [ 5.083442] Model: DVA-1622 [ 5.084520] This is default settings: set group disks wakeup number to 1, spinup time deno 1 [ 5.087805] synobios cpu_arch proc entry initialized [ 5.089905] synobios crypto_hw proc entry initialized [ 5.091833] synobios syno_platform proc entry initialized Insert net driver(Mindspeed only)... Starting [ 5.103125] Module [geminilake_synobios] is removed. [ 5.104693] synobios: unload /usr/syno/bin/synocfgen... /usr/syno/bin/synocfgen returns 0 addons.sh called with params patches dtbpatch - patches Patching /etc.defaults/model.dtb /sys/block/sata1/device/syno_block_info 00:1e.0,01.0,07.0 - 1 '/var/run/model.dtb' -> '/etc.defaults/model.dtb' Insert synorbd kernel module Insert synofsbd kernel module Insert sha256 kernel module Assemble args: -u 66931ec7:d7112777:58f5c97e:a6a675f7 /dev/sata1p1 [ 5.212780] md: md0 stopped. [ 5.214818] md: bind<sata1p1> [ 5.217395] md/raid1:md0: active with 1 out of 2 mirrors [ 5.316757] md0: detected capacity change from 0 to 8589869056 mdadm: /dev/md0 has been started with 1 drive (out of 2). Partition Version=9 [ 5.376862] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities [ 5.407596] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null) /sbin/e2fsck exists, checking /dev/md0... e2fsck 1.44.1 (24-Mar-2018) [error]Failed to open /dev/dri/card0 /sbin/e2fsck -yvf returns 0 Mounting /dev/md0 /tmpRoot [ 5.876076] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities [ 5.899075] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: prjquota,rootprjquota ------------upgrade Begin upgrade procedure [ 6.027565] loop: module loaded [ 6.043316] EXT4-fs (loop0): couldn't mount as ext3 due to feature incompatibilities [ 6.118551] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null) Failed to found any patch No upgrade file found [error]Failed to open /dev/dri/card0 ============upgrade ------------bootup-smallupdate Failed to AssertFileKeyValueEqual value1: /etc.defaults/VERSION:smallfixnumber -> 0 value2: /tmpRoot/.syno/patch/VERSION:smallfixnumber => 3 Skip bootup smallupdate, because root is not matched to junior ============bootup-smallupdate Failed to AssertFileKeyValueEqual value1: /etc.defaults/VERSION:smallfixnumber -> 0 value2: /tmpRoot/.syno/patch/VERSION:smallfixnumber => 3 Exit on error [7] root not matched with junior... Fri Sep 9 06:27:03 UTC 2022 /dev/md0 /tmpRoot ext4 rw,relatime,prjquota,rootprjquota,data=ordered 0 0 none /sys/kernel/debug debugfs rw,relatime 0 0 addons.sh called with params jrExit [ 7.198407] VFS: opened file in mnt_point: (/dev), file: (/urandom), comm: (ttyd) [ 7.200393] VFS: opened file in mnt_point: (/dev), file: (/null), comm: (linuxrc.syno.im) [ 7.202400] VFS: opened file in mnt_point: (/dev), file: (/null), comm: (ash) umount: can't unmount /dev: Device or resource busy umount: /etc/mtab: No such file or directory [ 7.219466] VFS: opened file in mnt_point: (/dev), file: (/urandom), comm: (ttyd) [ 7.222416] VFS: opened file in mnt_point: (/dev), file: (/null), comm: (linuxrc.syno.im) [ 7.225489] VFS: opened file in mnt_point: (/dev), file: (/null), comm: (ash) linuxrc.syno failed on 7 starting pid 5390, tty '': '/etc/rc' :: Starting /etc/rc :: Mounting procfs ... [ OK ] :: Mounting tmpfs ... [ OK ] :: Mounting devtmpfs ... [FAILED] :: Mounting devpts ... [ OK ] :: Mounting sysfs ... [ OK ] [ 7.320446] md: md1 stopped. [ 7.322635] md: bind<sata1p2> [ 7.325357] md/raid1:md1: active with 1 out of 2 mirrors [ 7.339491] md1: detected capacity change from 0 to 2147418112 [ 7.354149] Adding 2097084k swap on /dev/md1. Priority:-1 extents:1 across:2097084k :: Loading module crc-ccitt ... [ OK ] :: Loading module crc-itu-t ... [ OK ] :: Loading module mdio ... [ OK ] :: Loading module fat ... [ OK ] :: Loading module vfat ... [ OK ] :: Loading module udp_tunnel ... [ OK ] :: Loading module ip6_udp_tunnel ... [ OK ] :: Loading module vxlan ... [ OK ] :: Loading module dca[ 7.567068] dca service started, version 1.12.1 ... [ OK ] :: Loading module e1000e[ 7.576955] e1000e: Intel(R) PRO/1000 Network Driver - 3.8.4-NAPI [ 7.579393] e1000e: Copyright(c) 1999 - 2020 Intel Corporation. ... [ OK ] :: Loading module igb[ 7.591184] Intel(R) Gigabit Ethernet Linux Driver - version 5.11.4 [ 7.592995] Copyright(c) 2007 - 2022 Intel Corporation. ... [ OK ] :: Loading module be2net ... [ OK ] :: Loading module ixgbe[ 7.610451] Intel(R) 10GbE PCI Express Linux Network Driver - version 5.16.5 [ 7.613059] Copyright(c) 1999 - 2022 Intel Corporation. ... [ OK ] :: Loading module r8168 ... [ OK ] :: Loading module i40e[ 7.636548] i40e: Unknown symbol auxiliary_device_init (err 0) [ 7.638839] i40e: Unknown symbol __auxiliary_device_add (err 0) [ 7.647779] i40e: Unknown symbol auxiliary_device_init (err 0) [ 7.650075] i40e: Unknown symbol __auxiliary_device_add (err 0) ... [FAILED] :: Loading module sunrpc[ 7.683324] RPC: Registered named UNIX socket transport module. [ 7.685712] RPC: Registered udp transport module. [ 7.687487] RPC: Registered tcp transport module. [ 7.689274] RPC: Registered tcp NFSv4.1 backchannel transport module. ... [ OK ] :: Loading module grace ... [ OK ] :: Loading module lockd ... [ OK ] :: Loading module nfs ... [ OK ] :: Loading module nfsv3 ... [ OK ] :: Loading module leds-lp3943 ... [ OK ] [ 7.784432] synobios open /dev/ttyS1 success [ 7.786026] Fail to get disk 1 led type [ 7.787463] Fail to get disk 2 led type [ 7.789077] 2022-9-9 6:27:5 UTC [ 7.790303] synobios: load, major number 201 [ 7.791909] Brand: Synology [ 7.792983] Model: DVA-1622 [ 7.794027] This is default settings: set group disks wakeup number to 1, spinup time deno 1 [ 7.797178] synobios cpu_arch proc entry initialized [ 7.799082] synobios crypto_hw proc entry initialized [ 7.800993] synobios syno_platform proc entry initialized mknod: /dev/synobios: File exists Starting SW init... [ 8.415405] Module [geminilake_synobios] is removed. [ 8.417153] synobios: unload :: Loading module synobios[ 8.473198] synobios open /dev/ttyS1 success [ 8.475035] Fail to get disk 1 led type [ 8.476697] Fail to get disk 2 led type [ 8.478530] 2022-9-9 6:27:6 UTC [ 8.479931] synobios: load, major number 201 [ 8.481743] Brand: Synology [ 8.482901] Model: DVA-1622 [ 8.484219] This is default settings: set group disks wakeup number to 1, spinup time deno 1 [ 8.487826] synobios cpu_arch proc entry initialized [ 8.490024] synobios crypto_hw proc entry initialized [ 8.492133] synobios syno_platform proc entry initialized ... [ OK ] lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) :: Starting syslogd ... [ OK ] :: Starting scemd :: Starting services in background Starting JuniorExpansionPack Starting findhostd in flash_rd... Starting services in flash_rd... Running /usr/syno/etc/rc.d/J01httpd.sh... Starting httpd:80 in flash_rd... Starting httpd:5000 in flash_rd... Running /usr/syno/etc/rc.d/J03ssdpd.sh... /usr/bin/minissdpd Usage: /usr/bin/[ 15.790341] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities minissdpd [-d] [-6] [-s socket] [-p pidfile] -i <interface> [-i <interface2>] ... <interface> is either an IPv4 address such as 192.168.1.42, or an interface name such as eth0. By default, socket will be open as /var/run/minissdpd.sock and pid written to file /var/run/minissdpd.pid start SSDPD failed Running /usr/syno/etc/rc.d/J04synoagentregisterd.sh... Starting synoagentregisterd... Running /usr/syno/etc/rc.d/J30DisableNCQ.sh... cat: can't open '/sys/block/sd*/device//model': No such file or directory Running /usr/syno/etc/rc.d/J80ADTFanControl.sh... Running /usr/syno/etc/rc.d/J98nbnsd.sh... Starting nbnsd... Running /usr/syno/etc/rc.d/J99avahi.sh... [ 15.863027] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null) Starting Avahi mDNS/DNS-SD Daemon cname_load_conf failed:/var/tmp/nginx/avahi-aliases.conf :: Loading module usb-storage[ 15.940827] usbcore: registered new interface driver usb-storage ... [ OK ] :: Loading module hid ... [ OK ] :: Loading module usbhid[ 15.966112] usbcore: registered new interface driver usbhid [ 15.969226] usbhid: USB HID core driver ... [ OK ] :: Loading module hid-generic ... [ OK ] :: Loading module syno_hddmon ... [FAILED] Excution Error ============ Date ============ Fri Sep 9 06:27:13 UTC 2022 blParentProcess 1 process id 6344. blParentProcess 0 process id 6347. Get event from path: /dev/input/event0 ============================== starting pid 6350, tty '': '/sbin/getty 115200 co[ 16.046034] sldlocalinstall[6344]: segfault at 0 ip 0000560308e95798 sp 00007ffcfd160600 error 4nsole' FAILED. in sldlocalinstaller[560308e90000+2a000]killall drm_tool . Failed to open drm: No such file or directory Fri Sep 9 06:27:13 2022 SynologyNVR login: [ 16.266968] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities [ 16.296501] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null) [ 16.338141] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities [ 16.362906] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null) Fri Sep 9 06:34:01 2022 SynologyNVR login: This part worries me : addons.sh called with params modules Starting eudev daemon /addons/eudev.sh: line 6: /sbin/udevd: not found FAIL Loading 9p module modprobe: FATAL: Module 9p not found in directory /lib/modules modprobe: FATAL: Module 9pnet_virtio n Thanks for your help !
  5. I just did a fresh install with the alpha6 version, and still no network card detected ! My syno is under Proxmox, with virtio driver.
  6. @fbelavenutoFirst of all thank you for your precious contribution ! There is an error with the compilation of alpha6 :
  7. Hi there, Big mistake on my part, I wanted to upgrade to the latest version (42962) with a DVA1622. I wanted, suddenly, to put back version 42951 and I have a hash error on the pat file (in ARPL 0.4-alpha4)... Do you have a tip to get my DVA1622 working again please? Thanks
  8. I have some experience, I'll look at your links and see what I can do... But it seems complicated, even impossible...
  9. My CPU is a Xeon(R) CPU E5-2420 with no GPU included...
  10. Thank you for your answer, My processor is unfortunately not compatible with DVA3221...
  11. Good morning all, My processor does not have an integrated GPU. I installed an nvidia quadro K600, which I switched to "Passthrough" on my Proxmox VM. Everything is activated, but I can't get the DVA1622 display directly from this GPU, I assume that's normal, because the DVA1622 works with Intel GPUs, but there wouldn't be a way, because facial recognition does not work. Thank you for your help !
  12. no not yet, SurveillanceStation has not been launched
  13. I did not solve my problem, by removing the SurveillanceStation package, I no longer have the problem, but I need this package. I find myself stuck!
  14. Je viens de le réinstaller, et c'est reparti ! J'ai paramétré certaines de mes caméras, elle enregistrent bien, mais du coup, j'ai toujours le dossier "AUTRES" qui grossi ! Je ne comprend strictement rien. Et dans SurveillanceStation, je ne vois pas trop ce que je pourrais regarder/régler... Encore merci pour ton aide @nicoueron
  15. My disk is in RAW, and I just uninstalled the SurveillanceStation package, and I have no more problem. Well almost, since I mounted a virtual DSM FOR SurveillanceStation... Thanks a lot for your help !
  16. Bonjour @nicoueron, et merci pour ta réponse. Je viens de désinstaller le paquet SurveillanceStation, qui s'installe automatiquement avec un DVA1622, et surtout que je n'avais pas encore paramétré, et magie, je suis passé à plus de 30 giga à un peu moins de 400 mo !! Problème j'ai installé un DVA 1622 pour SurveillanceStation, et ces 8 licences (cam)... Quelqu'un aurait une idée du problème ? Merci de votre aide !
  17. Thank you for your reply. My DSM is virtualized, under Proxmox...
  18. Après avoir fait cette commande du -h -d 1 /volume1/ il s'avère que c'est le dossier @appstore qui grossi... Un peu d'aide ne serait pas de refus !
  19. Bonjour à tous, Je viens de faire une fresh instal d'un SYNO DVA1622 sous proxmox, avec l'aide du merveilleux outil "Automated redpill loader", et tout fonctionne parfaitement. Enfin presque, l'espace disque utilisé est en train d'augmenter, alors qu'aucun paquet n'est installé, le NAS est donc censé être vide (mise à part les données systèmes). Lorsque je vais dans "Gestionnaire de stockage", volume et que je regarde les détails relatifs à l'utilisation, j'ai la partie "AUTRES" qui augmente d'environ 1 giga toutes les 30 minutes... Auriez vous une idée du problème svp ? Merci de votre aide !
  20. Hello everyone, I have a big problem. I just reinstalled DSM, in version 7.1, under Proxmox. Everything works perfectly, for a short day, nothing is installed, so it is, for the moment, completely blank. Except that a few gigs used, I'm almost 70 gigs without adding anything, and it continues to grow. Would you have an idea of the problem?
  21. OK I found, there is an error in your command: /exts/redpill-dtb-static/dtc -I dtb -O dts /etc/model.dtb > /tmp/model.dts I modified the file, and I reinjected it, as you advised me, and the result: Installing DSM = OK Reboot, but I go back to the start, it no longer detects the disk for me. The modification made to the .dtb file is not saved. How to do please?
  22. I must have a problem, the command is launched, but nothing has happened for more than 30 minutes
  23. The disk is detected in position 6, while the system can only support 2. What do you think ? How do I unblock myself? Thanks again @pocopico
×
×
  • Create New...