scfrancis
Member-
Posts
46 -
Joined
-
Last visited
Recent Profile Visitors
The recent visitors block is disabled and is not being shown to other users.
scfrancis's Achievements
Junior Member (2/7)
4
Reputation
-
Develop and refine the DVA1622 loader
scfrancis replied to pocopico's topic in Developer Discussion Room
Hello everyone, After updating SS, I lost the 8 licenses of my DVA-1622. I just modified the SN, trigram (UBR), and I found the 8 SS licenses!! Thank you so much @Orphée -
This log comes from a fresh install ! If you need don't hesitate ! Thanks for your help !!
-
I have the same problem ! VM Proxmox, DVA1622 and no network...
-
/dev/md0 /tmpRoot ext4 rw,relatime,prjquota,rootprjquota,data=ordered 0 0 none /sys/kernel/debug debugfs rw,relatime 0 0 [error]Failed to open /dev/dri/card0 addons.sh called with params jrExit [ 8.249806] VFS: opened file in mnt_point: (/dev), file: (/null), comm: (ash) [ 8.252809] VFS: opened file in mnt_point: (/dev), file: (/null), comm: (linuxrc.syno.im) [ 8.256179] VFS: opened file in mnt_point: (/dev), file: (/urandom), comm: (ttyd) umount: can't unmount /dev: Device or resource busy umount: /etc/mtab: No such file or directory [ 8.276546] VFS: opened file in mnt_point: (/dev), file: (/null), comm: (ash) [ 8.279866] VFS: opened file in mnt_point: (/dev), file: (/null), comm: (linuxrc.syno.im) [ 8.283612] VFS: opened file in mnt_point: (/dev), file: (/urandom), comm: (ttyd) linuxrc.syno failed on 7 starting pid 5390, tty '': '/etc/rc' :: Starting /etc/rc :: Mounting procfs ... [ OK ] :: Mounting tmpfs ... [ OK ] :: Mounting devtmpfs ... [FAILED] :: Mounting devpts ... [ OK ] :: Mounting sysfs ... [ OK ] [ 8.382264] md: md1 stopped. [ 8.384134] md: bind<sata1p2> [ 8.386687] md/raid1:md1: active with 1 out of 2 mirrors [ 8.400849] md1: detected capacity change from 0 to 2147418112 [ 8.441328] Adding 2097084k swap on /dev/md1. Priority:-1 extents:1 across:2097084k :: Loading module crc-ccitt ... [ OK ] :: Loading module crc-itu-t ... [ OK ] :: Loading module mdio ... [ OK ] :: Loading module fat ... [ OK ] :: Loading module vfat ... [ OK ] :: Loading module udp_tunnel ... [ OK ] :: Loading module ip6_udp_tunnel ... [ OK ] :: Loading module vxlan ... [ OK ] :: Loading module dca[ 8.670888] dca service started, version 1.12.1 ... [ OK ] :: Loading module e1000e[ 8.680456] e1000e: Intel(R) PRO/1000 Network Driver - 3.8.4-NAPI [ 8.682797] e1000e: Copyright(c) 1999 - 2020 Intel Corporation. ... [ OK ] :: Loading module igb[ 8.694639] Intel(R) Gigabit Ethernet Linux Driver - version 5.11.4 [ 8.697058] Copyright(c) 2007 - 2022 Intel Corporation. ... [ OK ] :: Loading module be2net ... [ OK ] :: Loading module ixgbe[ 8.716741] Intel(R) 10GbE PCI Express Linux Network Driver - version 5.16.5 [ 8.718549] Copyright(c) 1999 - 2022 Intel Corporation. ... [ OK ] :: Loading module r8168 ... [ OK ] :: Loading module i40e[ 8.742864] i40e: Unknown symbol auxiliary_device_init (err 0) [ 8.744467] i40e: Unknown symbol __auxiliary_device_add (err 0) [ 8.752790] i40e: Unknown symbol auxiliary_device_init (err 0) [ 8.754427] i40e: Unknown symbol __auxiliary_device_add (err 0) ... [FAILED] :: Loading module sunrpc[ 8.790494] RPC: Registered named UNIX socket transport module. [ 8.792059] RPC: Registered udp transport module. [ 8.793280] RPC: Registered tcp transport module. [ 8.794485] RPC: Registered tcp NFSv4.1 backchannel transport module. ... [ OK ] :: Loading module grace ... [ OK ] :: Loading module lockd ... [ OK ] :: Loading module nfs ... [ OK ] :: Loading module nfsv3 ... [ OK ] :: Loading module leds-lp3943 ... [ OK ] [ 8.890725] synobios open /dev/ttyS1 success [ 8.891866] Fail to get disk 1 led type [ 8.892865] Fail to get disk 2 led type [ 8.894023] 2022-9-9 6:25:9 UTC [ 8.894805] synobios: load, major number 201 [ 8.895892] Brand: Synology [ 8.896636] Model: DVA-1622 [ 8.897390] This is default settings: set group disks wakeup number to 1, spinup time deno 1 [ 8.899554] synobios cpu_arch proc entry initialized [ 8.900802] synobios crypto_hw proc entry initialized [ 8.902118] synobios syno_platform proc entry initialized mknod: /dev/synobios: File exists Starting SW init... [ 9.516431] Module [geminilake_synobios] is removed. [ 9.517911] synobios: unload :: Loading module synobios[ 9.564822] synobios open /dev/ttyS1 success [ 9.565965] Fail to get disk 1 led type [ 9.566944] Fail to get disk 2 led type [ 9.568151] 2022-9-9 6:25:10 UTC [ 9.568947] synobios: load, major number 201 [ 9.570063] Brand: Synology [ 9.570751] Model: DVA-1622 [ 9.571484] This is default settings: set group disks wakeup number to 1, spinup time deno 1 [ 9.573638] synobios cpu_arch proc entry initialized [ 9.574883] synobios crypto_hw proc entry initialized [ 9.576181] synobios syno_platform proc entry initialized ... [ OK ] lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) :: Starting syslogd ... [ OK ] :: Starting scemd :: Starting services in background Starting JuniorExpansionPack Starting findhostd in flash_rd... Starting services in flash_rd... Running /usr/syno/etc/rc.d/J01httpd.sh... Starting httpd:80 in flash_rd... Starting httpd:5000 in flash_rd... Running /usr/syno/etc/rc.d/J03ssdpd.sh... [ 16.872802] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities /usr/bin/minissdpd Usage: /usr/bin/minissdpd [-d] [-6] [-s socket] [-p pidfile] -i <interface> [-i <interface2>] ... <interface> is either an IPv4 address such as 192.168.1.42, or an interface name such as eth0. By default, socket will be open as /var/run/minissdpd.sock and pid written to file /var/run/minissdpd.pid start SSDPD failed Running /usr/syno/etc/rc.d/J04synoagentregisterd.sh... Starting synoagentregisterd... Running /usr/syno/etc/rc.d/J30DisableNCQ.sh... cat: can't open '/sys/block/sd*/device//model': No such file or directory [ 16.908418] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null) Running /usr/syno/etc/rc.d/J80ADTFanControl.sh... Running /usr/syno/etc/rc.d/J98nbnsd.sh... Starting nbnsd... Booting `Boot DSM' Loading kernel... Loading initramfs... Booting... [ 4.689348] tmpfs: Unknown parameter 'mode' mount: mounting tmpfs on /dev/shm failed: Invalid argument [ 4.691987] tmpfs: Unknown parameter 'mode' mount: mounting tmpfs on /tmp failed: Invalid argument [ 4.694319] tmpfs: Unknown parameter 'mode' mount: mounting tmpfs on /run failed: Invalid argument Starting syslogd: OK Starting acpid: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: done Saving random seed: OK Starting network: OK Starting dhcpcd... dhcpcd-9.4.1 starting dev: loaded udev DUID 00:04:77:f9:a8:51:04:04:44:69:ad:22:2c:7c:6d:48:76:08 forked to background, child pid 194 ssh-keygen: generating new host keys: RSA DSA ECDSA ED25519 Starting sshd: OK Starting SMB services: OK Starting NMB services: OK Please press Enter to activate this console. [2022/09/09 06:26:48:8294] N: ttyd 1.6.3 (libwebsockets 4.0.22) [2022/09/09 06:26:48:8295] N: tty configuration: [2022/09/09 06:26:48:8295] N: start command: login -f root [2022/09/09 06:26:48:8295] N: close signal: SIGHUP (1) [2022/09/09 06:26:48:8295] N: terminal type: xterm-256color [2022/09/09 06:26:48:8300] N: Using foreign event loop... [2022/09/09 06:26:48:8304] N: Listening on port: 7681 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.4.180+ (root@build13) (gcc version 8.5.0 (GCC) ) #42661 SMP Fri Apr 1 15:33:03 CST 2022 [ 0.000000] Command line: synoboot_satadom=2 dom_szmax=510 console=ttyS0,115200n8 earlyprintk log_buf_len=32M earlycon=uart8250,io,0x3f8,115200n8 elevator=elevator root=/dev/md0 loglevel=15 syno_hw_version=DVA1622 netif_num=1 synoboot2 pid=0x0000 syno_port_thaw=1 mac1=be1393a6d005 sn=2030SJRL79H7B HddEnableDynamicPower=1 vid=0x0000 intel_iommu=igfx_off vender_format_version=2 syno_ttyS1=serial,0x2f8 syno_ttyS0=serial,0x3f8 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers' [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000400-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffddfff] usable [ 0.000000] BIOS-e820: [mem 0x000000007ffde000-0x000000007fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027fffffff] usable [ 0.000000] earlycon: Early serial console at I/O port 0x3f8 (options '115200n8') [ 0.000000] bootconsole [uart0] enabled [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014 [ 0.000000] Kernel/User page tables isolation: disabled [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x280000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000C0000000 mask 3FFFC0000000 uncachable [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] e820: last_pfn = 0x7ffde max_arch_pfn = 0x400000000 [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 28672 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x27cc7a000, 0x27cc7afff] PGTABLE [ 0.000000] BRK [0x27cc7b000, 0x27cc7bfff] PGTABLE [ 0.000000] BRK [0x27cc7c000, 0x27cc7cfff] PGTABLE [ 0.000000] BRK [0x27cc7d000, 0x27cc7dfff] PGTABLE [ 0.000000] BRK [0x27cc7e000, 0x27cc7efff] PGTABLE [ 0.000000] log_buf_len: 33554432 bytes [ 0.000000] early log buf free: 127324(97%) [ 0.000000] RAMDISK: [mem 0x278898000-0x27c1fffff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F5960 000014 (v00 BOCHS ) [ 0.000000] ACPI: RSDT 0x000000007FFE4B2F 00003C (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.000000] ACPI: FACP 0x000000007FFE4845 0000F4 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.000000] ACPI: DSDT 0x000000007FFDF040 005805 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.000000] ACPI: FACS 0x000000007FFDF000 000040 [ 0.000000] ACPI: APIC 0x000000007FFE4939 000090 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.000000] ACPI: SSDT 0x000000007FFE49C9 0000CA (v01 BOCHS VMGENID 00000001 BXPC 00000001) [ 0.000000] ACPI: HPET 0x000000007FFE4A93 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.000000] ACPI: MCFG 0x000000007FFE4ACB 00003C (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.000000] ACPI: WAET 0x000000007FFE4B07 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000007ffddfff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000027fffffff] [ 0.000000] On node 0 totalpages: 2097020 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 22 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 8128 pages used for memmap [ 0.000000] DMA32 zone: 520158 pages, LIFO batch:31 [ 0.000000] Normal zone: 24576 pages used for memmap [ 0.000000] Normal zone: 1572864 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x608 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ5 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ10 used by override. [ 0.000000] ACPI: IRQ11 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x7ffde000-0x7fffffff] [ 0.000000] PM: Registered nosave memory: [mem 0x80000000-0xafffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xb0000000-0xbfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfeffbfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfeffc000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xfffbffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfffc0000-0xffffffff] [ 0.000000] e820: [mem 0xc0000000-0xfed1bfff] available for PCI devices [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 33 pages/cpu @ffff88027dc00000 s95128 r8192 d31848 u524288 [ 0.000000] pcpu-alloc: s95128 r8192 d31848 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2064230 [ 0.000000] Kernel command line: synoboot_satadom=2 dom_szmax=510 console=ttyS0,115200n8 earlyprintk log_buf_len=32M earlycon=uart8250,io,0x3f8,115200n8 elevator=elevator root=/dev/md0 loglevel=15 syno_hw_version=DVA1622 netif_num=1 synoboot2 pid=0x0000 syno_port_thaw=1 mac1=be1393a6d005 sn=2030SJRL79H7B HddEnableDynamicPower=1 vid=0x0000 intel_iommu=igfx_off vender_format_version=2 syno_ttyS1=serial,0x2f8 syno_ttyS0=serial,0x3f8 [ 0.000000] Synology Hardware Version: DVA1622 [ 0.000000] Internal netif num: 1 [ 0.000000] Mac1: be1393a6d005 [ 0.000000] Serial Number: 2030SJRL79H7B [ 0.000000] Support HDD Dynamic Power. [ 0.000000] DMAR: Disable GFX device mapping [ 0.000000] Vender format version: 2 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Memory: 8075596K/8388080K available (5554K kernel code, 867K rwdata, 1820K rodata, 968K init, 664K bss, 312484K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000] NR_IRQS:4352 nr_irqs:456 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1899.940 MHz processor [ 0.003010] Calibrating delay loop (skipped), value calculated using timer frequency.. 3799.88 BogoMIPS (lpj=1899940) [ 0.004698] pid_max: default: 32768 minimum: 301 [ 0.005028] ACPI: Core revision 20150930 [ 0.010344] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.012006] Security Framework initialized [ 0.013033] AppArmor: AppArmor initialized [ 0.014016] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.015008] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.017314] Initializing cgroup subsys io [ 0.018015] Initializing cgroup subsys memory [ 0.019024] Initializing cgroup subsys devices [ 0.020014] Initializing cgroup subsys freezer [ 0.021083] CPU: Physical Processor ID: 0 [ 0.022005] CPU: Processor Core ID: 0 [ 0.023130] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.024005] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.025016] Speculative Store Bypass: Vulnerable [ 0.030798] Freeing SMP alternatives memory: 24K [ 0.034856] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.044423] TSC deadline timer enabled [ 0.045000] smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2420 0 @ 1.90GHz (family: 0x6, model: 0x2d, stepping: 0x7) [ 0.045973] Performance Events: 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver. [ 0.047441] ... version: 2 [ 0.048006] ... bit width: 48 [ 0.048957] ... generic registers: 4 [ 0.049006] ... value mask: 0000ffffffffffff [ 0.050005] ... max period: 00007fffffffffff [ 0.051005] ... fixed-purpose events: 3 [ 0.051956] ... event mask: 000000070000000f [ 0.052615] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.054294] x86: Booting SMP configuration: [ 0.055007] .... node #0, CPUs: #1 #2 #3 [ 0.061041] x86: Booted up 1 node, 4 CPUs [ 0.062007] smpboot: Total of 4 processors activated (15199.52 BogoMIPS) [ 0.064200] devtmpfs: initialized [ 0.066031] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.067016] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.068246] pinctrl core: initialized pinctrl subsystem [ 0.069297] NET: Registered protocol family 16 [ 0.074020] cpuidle: using governor ladder [ 0.080014] cpuidle: using governor menu [ 0.081121] ACPI: bus type PCI registered [ 0.082265] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000) [ 0.083008] PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved in E820 [ 0.084019] PCI: Using configuration type 1 for base access [ 0.085494] perf_event_intel: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off [ 0.087462] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.093020] ACPI: Added _OSI(Module Device) [ 0.094040] ACPI: Added _OSI(Processor Device) [ 0.095041] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.096034] ACPI: Added _OSI(Processor Aggregator Device) [ 0.101583] ACPI: Interpreter enabled [ 0.103029] ACPI: (supports S0 S4 S5) [ 0.103924] ACPI: Using IOAPIC for interrupt routing [ 0.105084] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.123064] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.124024] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.126178] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability] [ 0.128130] PCI host bridge to bus 0000:00 [ 0.129009] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.131008] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.132009] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.134008] pci_bus 0000:00: root bus resource [mem 0x80000000-0xafffffff window] [ 0.136008] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] [ 0.138008] pci_bus 0000:00: root bus resource [mem 0x280000000-0xa7fffffff window] [ 0.139013] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.141095] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 [ 0.142796] pci 0000:00:01.0: [1234:1111] type 00 class 0x030000 [ 0.147081] pci 0000:00:01.0: reg 0x10: [mem 0xfb000000-0xfbffffff pref] [ 0.153075] pci 0000:00:01.0: reg 0x18: [mem 0xfea14000-0xfea14fff] [ 0.164082] pci 0000:00:01.0: reg 0x30: [mem 0xfea00000-0xfea0ffff pref] [ 0.168211] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300 [ 0.173354] pci 0000:00:1a.0: reg 0x20: [io 0x5040-0x505f] [ 0.178007] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300 [ 0.182407] pci 0000:00:1a.1: reg 0x20: [io 0x5060-0x507f] [ 0.188011] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300 [ 0.193014] pci 0000:00:1a.2: reg 0x20: [io 0x5080-0x509f] [ 0.196751] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320 [ 0.199799] pci 0000:00:1a.7: reg 0x10: [mem 0xfea15000-0xfea15fff] [ 0.206058] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300 [ 0.207908] pci 0000:00:1b.0: reg 0x10: [mem 0xfea10000-0xfea13fff] [ 0.215557] pci 0000:00:1c.0: [1b36:000c] type 01 class 0x060400 [ 0.218010] pci 0000:00:1c.0: reg 0x10: [mem 0xfea16000-0xfea16fff] [ 0.224968] pci 0000:00:1c.1: [1b36:000c] type 01 class 0x060400 [ 0.228011] pci 0000:00:1c.1: reg 0x10: [mem 0xfea17000-0xfea17fff] [ 0.233949] pci 0000:00:1c.2: [1b36:000c] type 01 class 0x060400 [ 0.237010] pci 0000:00:1c.2: reg 0x10: [mem 0xfea18000-0xfea18fff] [ 0.242624] pci 0000:00:1c.3: [1b36:000c] type 01 class 0x060400 [ 0.246633] pci 0000:00:1c.3: reg 0x10: [mem 0xfea19000-0xfea19fff] [ 0.250927] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 [ 0.258012] pci 0000:00:1d.0: reg 0x20: [io 0x50a0-0x50bf] [ 0.260707] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 [ 0.267012] pci 0000:00:1d.1: reg 0x20: [io 0x50c0-0x50df] [ 0.270680] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 [ 0.277691] pci 0000:00:1d.2: reg 0x20: [io 0x50e0-0x50ff] [ 0.280739] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 [ 0.282751] pci 0000:00:1d.7: reg 0x10: [mem 0xfea1a000-0xfea1afff] [ 0.291060] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 0.294535] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 [ 0.297813] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO [ 0.301450] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 [ 0.309013] pci 0000:00:1f.2: reg 0x20: [io 0x5100-0x511f] [ 0.313026] pci 0000:00:1f.2: reg 0x24: [mem 0xfea1b000-0xfea1bfff] [ 0.316580] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 [ 0.322738] pci 0000:00:1f.3: reg 0x20: [io 0x0700-0x073f] [ 0.326382] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.328038] pci 0000:00:1c.0: bridge window [io 0x6000-0x6fff] [ 0.329037] pci 0000:00:1c.0: bridge window [mem 0xfe800000-0xfe9fffff] [ 0.331063] pci 0000:00:1c.0: bridge window [mem 0xfce00000-0xfcffffff 64bit pref] [ 0.335170] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 0.337039] pci 0000:00:1c.1: bridge window [io 0x7000-0x7fff] [ 0.338037] pci 0000:00:1c.1: bridge window [mem 0xfe600000-0xfe7fffff] [ 0.340063] pci 0000:00:1c.1: bridge window [mem 0xfcc00000-0xfcdfffff 64bit pref] [ 0.343145] pci 0000:00:1c.2: PCI bridge to [bus 03] [ 0.344044] pci 0000:00:1c.2: bridge window [io 0x8000-0x8fff] [ 0.346039] pci 0000:00:1c.2: bridge window [mem 0xfe400000-0xfe5fffff] [ 0.347063] pci 0000:00:1c.2: bridge window [mem 0xfca00000-0xfcbfffff 64bit pref] [ 0.350154] pci 0000:00:1c.3: PCI bridge to [bus 04] [ 0.352038] pci 0000:00:1c.3: bridge window [io 0x9000-0x9fff] [ 0.354040] pci 0000:00:1c.3: bridge window [mem 0xfe200000-0xfe3fffff] [ 0.356080] pci 0000:00:1c.3: bridge window [mem 0xfc800000-0xfc9fffff 64bit pref] [ 0.359207] pci 0000:05:01.0: [1b36:0001] type 01 class 0x060400 [ 0.362010] pci 0000:05:01.0: reg 0x10: [mem 0xfe000000-0xfe0000ff 64bit] [ 0.367060] pci 0000:05:02.0: [1b36:0001] type 01 class 0x060400 [ 0.370010] pci 0000:05:02.0: reg 0x10: [mem 0xfe001000-0xfe0010ff 64bit] [ 0.374873] pci 0000:05:03.0: [1b36:0001] type 01 class 0x060400 [ 0.377649] pci 0000:05:03.0: reg 0x10: [mem 0xfe002000-0xfe0020ff 64bit] [ 0.381882] pci 0000:05:04.0: [1b36:0001] type 01 class 0x060400 [ 0.385781] pci 0000:05:04.0: reg 0x10: [mem 0xfe003000-0xfe0030ff 64bit] [ 0.389158] pci 0000:00:1e.0: PCI bridge to [bus 05-09] (subtractive decode) [ 0.391038] pci 0000:00:1e.0: bridge window [io 0x1000-0x4fff] [ 0.393037] pci 0000:00:1e.0: bridge window [mem 0xfd800000-0xfe1fffff] [ 0.394084] pci 0000:00:1e.0: bridge window [mem 0xfc000000-0xfc7fffff 64bit pref] [ 0.397011] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.399009] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.401010] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.404009] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xafffffff window] (subtractive decode) [ 0.406009] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff window] (subtractive decode) [ 0.408008] pci 0000:00:1e.0: bridge window [mem 0x280000000-0xa7fffffff window] (subtractive decode) [ 0.411066] pci 0000:06:07.0: [8086:2922] type 00 class 0x010601 [ 0.419611] pci 0000:06:07.0: reg 0x20: [io 0x4000-0x401f] [ 0.422009] pci 0000:06:07.0: reg 0x24: [mem 0xfde40000-0xfde40fff] [ 0.426105] pci 0000:06:12.0: [1af4:1000] type 00 class 0x020000 [ 0.430856] pci 0000:06:12.0: reg 0x10: [io 0x4020-0x403f] [ 0.434009] pci 0000:06:12.0: reg 0x14: [mem 0xfde41000-0xfde41fff] [ 0.443902] pci 0000:06:12.0: reg 0x20: [mem 0xfc600000-0xfc603fff 64bit pref] [ 0.447010] pci 0000:06:12.0: reg 0x30: [mem 0xfde00000-0xfde3ffff pref] [ 0.450077] pci 0000:05:01.0: PCI bridge to [bus 06] [ 0.451036] pci 0000:05:01.0: bridge window [io 0x4000-0x4fff] [ 0.454051] pci 0000:05:01.0: bridge window [mem 0xfde00000-0xfdffffff] [ 0.455062] pci 0000:05:01.0: bridge window [mem 0xfc600000-0xfc7fffff 64bit pref] [ 0.458492] pci 0000:05:02.0: PCI bridge to [bus 07] [ 0.460037] pci 0000:05:02.0: bridge window [io 0x3000-0x3fff] [ 0.461035] pci 0000:05:02.0: bridge window [mem 0xfdc00000-0xfddfffff] [ 0.463062] pci 0000:05:02.0: bridge window [mem 0xfc400000-0xfc5fffff 64bit pref] [ 0.465439] pci 0000:05:03.0: PCI bridge to [bus 08] [ 0.467036] pci 0000:05:03.0: bridge window [io 0x2000-0x2fff] [ 0.468035] pci 0000:05:03.0: bridge window [mem 0xfda00000-0xfdbfffff] [ 0.470061] pci 0000:05:03.0: bridge window [mem 0xfc200000-0xfc3fffff 64bit pref] [ 0.474480] pci 0000:05:04.0: PCI bridge to [bus 09] [ 0.475037] pci 0000:05:04.0: bridge window [io 0x1000-0x1fff] [ 0.477036] pci 0000:05:04.0: bridge window [mem 0xfd800000-0xfd9fffff] [ 0.480074] pci 0000:05:04.0: bridge window [mem 0xfc000000-0xfc1fffff 64bit pref] [ 0.488702] pci_bus 0000:00: on NUMA node 0 [ 0.491082] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11), disabled. [ 0.494584] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11), disabled. [ 0.495686] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11), disabled. [ 0.497695] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11), disabled. [ 0.499677] ACPI: PCI Interrupt Link [LNKE] (IRQs 5 *10 11), disabled. [ 0.500681] ACPI: PCI Interrupt Link [LNKF] (IRQs 5 *10 11), disabled. [ 0.502684] ACPI: PCI Interrupt Link [LNKG] (IRQs 5 10 *11), disabled. [ 0.504689] ACPI: PCI Interrupt Link [LNKH] (IRQs 5 10 *11), disabled. [ 0.505624] ACPI: PCI Interrupt Link [GSIA] (IRQs *16) [ 0.507218] ACPI: PCI Interrupt Link [GSIB] (IRQs *17) [ 0.508210] ACPI: PCI Interrupt Link [GSIC] (IRQs *18) [ 0.510215] ACPI: PCI Interrupt Link [GSID] (IRQs *19) [ 0.511212] ACPI: PCI Interrupt Link [GSIE] (IRQs *20) [ 0.512217] ACPI: PCI Interrupt Link [GSIF] (IRQs *21) [ 0.513209] ACPI: PCI Interrupt Link [GSIG] (IRQs *22) [ 0.515217] ACPI: PCI Interrupt Link [GSIH] (IRQs *23) [ 0.517000] ACPI: Enabled 3 GPEs in block 00 to 3F [ 0.519075] vgaarb: setting as boot device: PCI:0000:00:01.0 [ 0.520000] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none [ 0.522019] vgaarb: loaded [ 0.522666] vgaarb: bridge control possible 0000:00:01.0 [ 0.524297] SCSI subsystem initialized [ 0.525149] libata version 3.00 loaded. [ 0.526265] pps_core: LinuxPPS API ver. 1 registered [ 0.528022] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 0.530061] PTP clock support registered [ 0.532003] PCI: Using ACPI for IRQ routing [ 0.644968] PCI: pci_cache_line_size set to 64 bytes [ 0.646707] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.648013] e820: reserve RAM buffer [mem 0x7ffde000-0x7fffffff] [ 0.650146] clocksource: Switched to clocksource hpet [ 0.693171] AppArmor: AppArmor Filesystem Enabled [ 0.695251] pnp: PnP ACPI init [ 0.696836] pnp 00:00: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.699689] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.701767] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.703947] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.706402] system 00:04: [mem 0xb0000000-0xbfffffff window] has been reserved [ 0.708595] system 00:04: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.710956] pnp: PnP ACPI: found 5 devices [ 0.738898] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.754181] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.755647] pci 0000:00:1c.0: bridge window [io 0x6000-0x6fff] [ 0.758827] pci 0000:00:1c.0: bridge window [mem 0xfe800000-0xfe9fffff] [ 0.761843] pci 0000:00:1c.0: bridge window [mem 0xfce00000-0xfcffffff 64bit pref] [ 0.766717] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 0.768343] pci 0000:00:1c.1: bridge window [io 0x7000-0x7fff] [ 0.771361] pci 0000:00:1c.1: bridge window [mem 0xfe600000-0xfe7fffff] [ 0.774865] pci 0000:00:1c.1: bridge window [mem 0xfcc00000-0xfcdfffff 64bit pref] [ 0.778901] pci 0000:00:1c.2: PCI bridge to [bus 03] [ 0.780529] pci 0000:00:1c.2: bridge window [io 0x8000-0x8fff] [ 0.783634] pci 0000:00:1c.2: bridge window [mem 0xfe400000-0xfe5fffff] [ 0.787297] pci 0000:00:1c.2: bridge window [mem 0xfca00000-0xfcbfffff 64bit pref] [ 0.791269] pci 0000:00:1c.3: PCI bridge to [bus 04] [ 0.792795] pci 0000:00:1c.3: bridge window [io 0x9000-0x9fff] [ 0.795865] pci 0000:00:1c.3: bridge window [mem 0xfe200000-0xfe3fffff] [ 0.799430] pci 0000:00:1c.3: bridge window [mem 0xfc800000-0xfc9fffff 64bit pref] [ 0.803490] pci 0000:05:01.0: PCI bridge to [bus 06] [ 0.804989] pci 0000:05:01.0: bridge window [io 0x4000-0x4fff] [ 0.808849] pci 0000:05:01.0: bridge window [mem 0xfde00000-0xfdffffff] [ 0.811773] pci 0000:05:01.0: bridge window [mem 0xfc600000-0xfc7fffff 64bit pref] [ 0.815846] pci 0000:05:02.0: PCI bridge to [bus 07] [ 0.817878] pci 0000:05:02.0: bridge window [io 0x3000-0x3fff] [ 0.820636] pci 0000:05:02.0: bridge window [mem 0xfdc00000-0xfddfffff] [ 0.823095] pci 0000:05:02.0: bridge window [mem 0xfc400000-0xfc5fffff 64bit pref] [ 0.826583] pci 0000:05:03.0: PCI bridge to [bus 08] [ 0.828712] pci 0000:05:03.0: bridge window [io 0x2000-0x2fff] [ 0.831851] pci 0000:05:03.0: bridge window [mem 0xfda00000-0xfdbfffff] [ 0.834897] pci 0000:05:03.0: bridge window [mem 0xfc200000-0xfc3fffff 64bit pref] [ 0.839697] pci 0000:05:04.0: PCI bridge to [bus 09] [ 0.841499] pci 0000:05:04.0: bridge window [io 0x1000-0x1fff] [ 0.844172] pci 0000:05:04.0: bridge window [mem 0xfd800000-0xfd9fffff] [ 0.846655] pci 0000:05:04.0: bridge window [mem 0xfc000000-0xfc1fffff 64bit pref] [ 0.850834] pci 0000:00:1e.0: PCI bridge to [bus 05-09] [ 0.852248] pci 0000:00:1e.0: bridge window [io 0x1000-0x4fff] [ 0.854853] pci 0000:00:1e.0: bridge window [mem 0xfd800000-0xfe1fffff] [ 0.857338] pci 0000:00:1e.0: bridge window [mem 0xfc000000-0xfc7fffff 64bit pref] [ 0.861713] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.863404] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.864942] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.866696] pci_bus 0000:00: resource 7 [mem 0x80000000-0xafffffff window] [ 0.868395] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window] [ 0.870225] pci_bus 0000:00: resource 9 [mem 0x280000000-0xa7fffffff window] [ 0.871958] pci_bus 0000:01: resource 0 [io 0x6000-0x6fff] [ 0.873400] pci_bus 0000:01: resource 1 [mem 0xfe800000-0xfe9fffff] [ 0.874956] pci_bus 0000:01: resource 2 [mem 0xfce00000-0xfcffffff 64bit pref] [ 0.876779] pci_bus 0000:02: resource 0 [io 0x7000-0x7fff] [ 0.878423] pci_bus 0000:02: resource 1 [mem 0xfe600000-0xfe7fffff] [ 0.880567] pci_bus 0000:02: resource 2 [mem 0xfcc00000-0xfcdfffff 64bit pref] [ 0.882891] pci_bus 0000:03: resource 0 [io 0x8000-0x8fff] [ 0.884823] pci_bus 0000:03: resource 1 [mem 0xfe400000-0xfe5fffff] [ 0.886890] pci_bus 0000:03: resource 2 [mem 0xfca00000-0xfcbfffff 64bit pref] [ 0.889277] pci_bus 0000:04: resource 0 [io 0x9000-0x9fff] [ 0.891060] pci_bus 0000:04: resource 1 [mem 0xfe200000-0xfe3fffff] [ 0.893429] pci_bus 0000:04: resource 2 [mem 0xfc800000-0xfc9fffff 64bit pref] [ 0.896333] pci_bus 0000:05: resource 0 [io 0x1000-0x4fff] [ 0.898593] pci_bus 0000:05: resource 1 [mem 0xfd800000-0xfe1fffff] [ 0.900786] pci_bus 0000:05: resource 2 [mem 0xfc000000-0xfc7fffff 64bit pref] [ 0.903406] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7 window] [ 0.905626] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff window] [ 0.907902] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.910441] pci_bus 0000:05: resource 7 [mem 0x80000000-0xafffffff window] [ 0.913425] pci_bus 0000:05: resource 8 [mem 0xc0000000-0xfebfffff window] [ 0.915826] pci_bus 0000:05: resource 9 [mem 0x280000000-0xa7fffffff window] [ 0.918405] pci_bus 0000:06: resource 0 [io 0x4000-0x4fff] [ 0.920454] pci_bus 0000:06: resource 1 [mem 0xfde00000-0xfdffffff] [ 0.922685] pci_bus 0000:06: resource 2 [mem 0xfc600000-0xfc7fffff 64bit pref] [ 0.925347] pci_bus 0000:07: resource 0 [io 0x3000-0x3fff] [ 0.927338] pci_bus 0000:07: resource 1 [mem 0xfdc00000-0xfddfffff] [ 0.929584] pci_bus 0000:07: resource 2 [mem 0xfc400000-0xfc5fffff 64bit pref] [ 0.932189] pci_bus 0000:08: resource 0 [io 0x2000-0x2fff] [ 0.934166] pci_bus 0000:08: resource 1 [mem 0xfda00000-0xfdbfffff] [ 0.936473] pci_bus 0000:08: resource 2 [mem 0xfc200000-0xfc3fffff 64bit pref] [ 0.939054] pci_bus 0000:09: resource 0 [io 0x1000-0x1fff] [ 0.941052] pci_bus 0000:09: resource 1 [mem 0xfd800000-0xfd9fffff] [ 0.943036] pci_bus 0000:09: resource 2 [mem 0xfc000000-0xfc1fffff 64bit pref] [ 0.944982] NET: Registered protocol family 2 [ 0.946481] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.948788] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.951277] TCP: Hash tables configured (established 65536 bind 65536) [ 0.953077] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.955329] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.957862] NET: Registered protocol family 1 [ 0.959637] pci 0000:00:01.0: Video device with shadowed ROM [ 0.962248] ACPI: PCI Interrupt Link [GSIA] enabled at IRQ 16 [ 0.965196] ACPI: PCI Interrupt Link [GSIB] enabled at IRQ 17 [ 0.967928] ACPI: PCI Interrupt Link [GSIC] enabled at IRQ 18 [ 0.970688] ACPI: PCI Interrupt Link [GSID] enabled at IRQ 19 [ 0.977878] PCI: CLS 64 bytes, default 64 [ 2.800922] Trying to unpack rootfs image as initramfs... [ 2.901511] Freeing initrd memory: 58784K [ 2.905651] redpill: loading out-of-tree module taints kernel. [ 2.907591] redpill: module verification failed: signature and/or required key missing - tainting kernel [ 2.936684] PCI host bridge to bus 0001:01 [ 2.937885] pci_bus 0001:01: root bus resource [io 0x0000-0xffff] [ 2.940003] pci_bus 0001:01: root bus resource [mem 0x00000000-0x3fffffffffff] [ 2.942804] pci_bus 0001:01: root bus resource [bus 00-ff] [ 2.944826] pci 0001:01:00.0: [1b4b:9235] type 00 class 0x010601 [ 2.947162] pci 0001:01:00.0: Can't map mv9235 registers [ 2.967969] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 2.970356] software IO TLB: mapped [mem 0x7bfde000-0x7ffde000] (64MB) [ 2.972889] RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 10737418240 ms ovfl timer [ 2.976157] hw unit of domain pp0-core 2^-0 Joules [ 2.977901] hw unit of domain package 2^-0 Joules [ 2.979599] hw unit of domain dram 2^-0 Joules [ 2.982974] audit: initializing netlink subsys (disabled) [ 2.984896] audit: type=2000 audit(1662704819.984:1): initialized [ 2.987429] Initialise system trusted keyring [ 3.060382] VFS: Disk quotas dquot_6.6.0 [ 3.062257] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 3.187157] Key type asymmetric registered [ 3.188992] Asymmetric key parser 'x509' registered [ 3.191310] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 3.194611] io scheduler noop registered [ 3.196397] io scheduler deadline registered [ 3.198419] io scheduler cfq registered (default) [ 3.213961] aer 0000:00:1c.0:pcie02: service driver aer loaded [ 3.216866] aer 0000:00:1c.1:pcie02: service driver aer loaded [ 3.219727] aer 0000:00:1c.2:pcie02: service driver aer loaded [ 3.222503] aer 0000:00:1c.3:pcie02: service driver aer loaded [ 3.225188] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt [ 3.228227] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded [ 3.231179] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt [ 3.234277] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded [ 3.237231] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt [ 3.240279] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded [ 3.243274] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt [ 3.246365] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded [ 3.668272] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 3.700115] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 3.703474] console [ttyS0] enabled [ 3.703474] console [ttyS0] enabled [ 3.706516] bootconsole [uart0] disabled [ 3.706516] bootconsole [uart0] disabled [ 3.845897] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 3.849790] Linux agpgart interface v0.103 [ 3.857964] brd: module loaded [ 3.859376] lpc_ich 0000:00:1f.0: I/O space for GPIO uninitialized [ 3.861559] Loading iSCSI transport class v2.0-870. [ 3.873581] ahci 0000:00:1f.2: version 3.0 [ 3.876424] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode [ 3.878529] ahci 0000:00:1f.2: flags: 64bit ncq only [ 3.880725] Cannot find slot node of this ata_port. [ 3.882544] Cannot find slot node of this ata_port. [ 3.884419] Cannot find slot node of this ata_port. [ 3.886192] Cannot find slot node of this ata_port. [ 3.888084] Cannot find slot node of this ata_port. [ 3.889892] Cannot find slot node of this ata_port. [ 3.952857] scsi host0: ahci [ 3.961344] scsi host1: ahci [ 3.964941] scsi host2: ahci [ 3.967769] scsi host3: ahci [ 3.970371] scsi host4: ahci [ 3.973870] scsi host5: ahci [ 3.974824] ata1 : SATA max UDMA/133 abar m4096@0xfea1b000 port 0xfea1b100 irq 28 [ 3.976767] ata2 : SATA max UDMA/133 abar m4096@0xfea1b000 port 0xfea1b180 irq 28 [ 3.979313] ata3 : SATA max UDMA/133 abar m4096@0xfea1b000 port 0xfea1b200 irq 28 [ 3.981965] ata4 : SATA max UDMA/133 abar m4096@0xfea1b000 port 0xfea1b280 irq 28 [ 3.983364] tsc: Refined TSC clocksource calibration: 1900.003 MHz [ 3.983367] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x36c65d91a72, max_idle_ns: 881590606376 ns [ 3.990381] ata5 : SATA max UDMA/133 abar m4096@0xfea1b000 port 0xfea1b300 irq 28 [ 3.993089] ata6 : SATA max UDMA/133 abar m4096@0xfea1b000 port 0xfea1b380 irq 28 [ 3.997347] ACPI: PCI Interrupt Link [GSIF] enabled at IRQ 21 [ 4.000734] ACPI: PCI Interrupt Link [GSIE] enabled at IRQ 20 [ 4.004065] ahci 0000:06:07.0: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode [ 4.006973] ahci 0000:06:07.0: flags: 64bit ncq only [ 4.009618] Cannot find slot node of this ata_port. [ 4.011578] Cannot find slot node of this ata_port. [ 4.013532] Cannot find slot node of this ata_port. [ 4.015467] Cannot find slot node of this ata_port. [ 4.017403] Cannot find slot node of this ata_port. [ 4.019282] Cannot find slot node of this ata_port. [ 4.025730] scsi host6: ahci [ 4.031458] scsi host7: ahci [ 4.039837] scsi host8: ahci [ 4.044757] scsi host9: ahci [ 4.047483] scsi host10: ahci [ 4.049198] scsi host11: ahci [ 4.050908] ata7 : SATA max UDMA/133 abar m4096@0xfde40000 port 0xfde40100 irq 29 [ 4.053564] ata8 : SATA max UDMA/133 abar m4096@0xfde40000 port 0xfde40180 irq 29 [ 4.056179] ata9 : SATA max UDMA/133 abar m4096@0xfde40000 port 0xfde40200 irq 29 [ 4.058263] ata10 : SATA max UDMA/133 abar m4096@0xfde40000 port 0xfde40280 irq 29 [ 4.060887] ata11 : SATA max UDMA/133 abar m4096@0xfde40000 port 0xfde40300 irq 29 [ 4.063679] ata12 : SATA max UDMA/133 abar m4096@0xfde40000 port 0xfde40380 irq 29 [ 4.066585] ahci: probe of 0001:01:00.0 failed with error -22 [ 4.068665] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 4.072526] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 4.074350] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 4.076737] mousedev: PS/2 mouse device common for all mice [ 4.078480] i2c /dev entries driver [ 4.080346] i801_smbus 0000:00:1f.3: SMBus using polling [ 4.084132] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 4.087705] evbug: Connected device: input0 (AT Translated Set 2 keyboard at isa0060/serio0/input0) [ 4.095426] md: raid1 personality registered for level 1 [ 4.097563] NET: Registered protocol family 17 [ 4.099317] Key type dns_resolver registered [ 4.107525] mce: Using 10 MCE banks [ 4.112170] registered taskstats version 1 [ 4.114156] Loading compiled-in untrusted X.509 certificates [ 4.117128] Loading compiled-in X.509 certificates [ 4.119558] Loaded X.509 cert 'Synology SDG kernel module signing key: 7bd0b0d6bcd31651c22ce3978bdc8c8bdc417329' [ 4.127244] Loaded X.509 cert 'Synology Root Certification Authority: f2c075361f168425f8b5ef31b796406c3aab2089' [ 4.132144] Loaded X.509 cert 'Synology Kernel Module Signing Certification Authority: 600839b5d127e0e11d817a31f0575d323a7c0e28' [ 4.137824] Loaded X.509 cert 'Synology kernel module signing key: 4646ce54489669338118a3b1286da156ac366fa5' [ 4.142710] page_owner is disabled [ 4.144494] AppArmor: AppArmor sha1 policy hashing enabled [ 4.150152] hctosys: unable to open rtc device (rtc0) [ 4.302444] ata2 : SATA link down (SStatus 0 SControl 300) [ 4.304914] ata2 : No present pin info for SATA link down event [ 4.308142] ata4 : SATA link down (SStatus 0 SControl 300) [ 4.310055] ata4 : No present pin info for SATA link down event [ 4.312094] ata6 : SATA link down (SStatus 0 SControl 300) [ 4.314240] ata6 : No present pin info for SATA link down event [ 4.316906] ata3 : SATA link down (SStatus 0 SControl 300) [ 4.319459] ata3 : No present pin info for SATA link down event [ 4.322708] ata5 : SATA link down (SStatus 0 SControl 300) [ 4.324110] ata5 : No present pin info for SATA link down event [ 4.325912] ata1 : SATA link down (SStatus 0 SControl 300) [ 4.327433] ata1 : No present pin info for SATA link down event [ 4.374318] ata12 : SATA link down (SStatus 0 SControl 300) [ 4.376798] ata12 : No present pin info for SATA link down event [ 4.379977] ata7 : SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 4.382495] ata9 : SATA link down (SStatus 0 SControl 300) [ 4.384709] ata9 : No present pin info for SATA link down event [ 4.387424] ata8 : SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 4.390610] ata7.00 : ATA-7: QEMU HARDDISK, 2.5+, max UDMA/100 [ 4.392599] ata7.00 : 1024000 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 4.394797] ata7.00 : SN:QM00013 [ 4.395930] ata7.00 : applying bridge limits [ 4.397490] ata8.00 : ATA-7: QEMU HARDDISK, 2.5+, max UDMA/100 [ 4.400258] ata8.00 : 2097152000 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 4.403499] ata8.00 : SN:QM00015 [ 4.405106] ata8.00 : applying bridge limits [ 4.407667] ata11 : SATA link down (SStatus 0 SControl 300) [ 4.409152] ata11 : No present pin info for SATA link down event [ 4.410757] ata7.00 : configured for UDMA/100 [ 4.412358] ata8.00 : configured for UDMA/100 [ 4.412632] ata7.00 : Find SSD disks. [QEMU HARDDISK] [ 4.414721] scsi 6:0:0:0: Direct-Access QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5 [ 4.422089] ata10 : SATA link down (SStatus 0 SControl 300) [ 4.423533] ata10 : No present pin info for SATA link down event [ 4.424978] sd 6:0:0:0: [synoboot] 1024000 512-byte logical blocks: (524 MB/500 MiB) [ 4.424997] ata8.00 : Find SSD disks. [QEMU HARDDISK] [ 4.425672] sd 6:0:0:0: [synoboot] Write Protect is off [ 4.425674] sd 6:0:0:0: [synoboot] Mode Sense: 00 3a 00 00 [ 4.426237] scsi 7:0:0:0: Direct-Access QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5 [ 4.426757] Cannot find slot node of this ata_port. [ 4.426759] got SATA disk[0] [ 4.427262] sd 7:0:0:0: [sata1] 2097152000 512-byte logical blocks: (1.07 TB/1000 GiB) [ 4.427663] sd 7:0:0:0: [sata1] Write Protect is off [ 4.427665] sd 7:0:0:0: [sata1] Mode Sense: 00 3a 00 00 [ 4.427780] sd 7:0:0:0: [sata1] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.428238] sd 6:0:0:0: [synoboot] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.430671] sata1: p1 p2 p3 < p5 > [ 4.433616] synoboot: synoboot1 synoboot2 synoboot3 [ 4.433960] sd 7:0:0:0: [sata1] Attached SCSI disk [ 4.434859] sd 6:0:0:0: [synoboot] Attached SCSI disk [ 4.457666] Freeing unused kernel memory: 968K [ 4.458983] Write protecting the kernel read-only data: 8192k [ 4.461875] Freeing unused kernel memory: 580K [ 4.464291] Freeing unused kernel memory: 228K START /linuxrc.syno START /linuxrc.syno.impl [ 4.643071] random: nonblocking pool is initialized addons.sh called with params early Starting ttyd... [2022/09/09 06:27:01:7081] N: ttyd 1.7.0-3ba994a (libwebsockets 4.3.2-unknown) [2022/09/09 06:27:01:7082] N: tty configuration: [2022/09/09 06:27:01:7082] N: start command: /usr/bin/ash [2022/09/09 06:27:01:7082] N: close signal: SIGHUP (1) [2022/09/09 06:27:01:7083] N: terminal type: xterm-256color [2022/09/09 06:27:01:7083] N: lws_create_context: LWS: 4.3.2-unknown, NET SRV H1 WS MbedTLS ConMon IPV6-off [2022/09/09 06:27:01:7086] N: elops_init_pt_uv: Using foreign event loop... [2022/09/09 06:27:01:7087] N: __lws_lc_tag: ++ [wsi|0|pipe] (1) [2022/09/09 06:27:01:7088] N: __lws_lc_tag: ++ [vh|0|netlink] (1) [2022/09/09 06:27:01:7089] N: __lws_lc_tag: ++ [vh|1|default||7681] (2) [2022/09/09 06:27:01:7092] N: [vh|1|default||7681]: lws_socket_bind: source ads 0.0.0.0 [2022/09/09 06:27:01:7092] N: __lws_lc_tag: ++ [wsi|1|listen|d[ 4.759980] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 e[ 4.762111] evbug: Connected device: input2 (Power Button at LNXPWRBN/button/input0) [ 4.764097] ACPI: Power Button [PWRF] fault||7681] (2) [2022/09/09 06:27:01:7093] N: Listening on port: 7681 '/etc.defaults/model.dtb' -> '/var/run/model.dtb' Insert HDMI Audio driver [error]Failed to open /dev/dri/card0 Insert basic USB modules... [ 4.853165] snd_hda_intel 0000:00:1b.0: no codecs found! :: Loading module usb-common ... [ OK ] :: Loading module usbcore [ 4.896210] ACPI: bus type USB registered [ 4.898427] usbcore: registered new interface driver usbfs [ 4.901390] usbcore: registered new interface driver hub [ 4.904342] usbcore: registered new interface driver ethub [ 4.907216] usbcore: registered new device driver usb ... [ OK ] :: Loading module ehci-hcd [ 4.928839] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ... [ OK ] :: Loading module ehci-pci [ 4.941427] ehci-pci: EHCI PCI platform driver [ 4.944452] ehci-pci 0000:00:1a.7: EHCI Host Controller [ 4.946735] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 4.950282] ehci-pci 0000:00:1a.7: irq 19, io mem 0xfea15000 [ 4.958224] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 4.962196] hub 1-0:1.0: USB hub found [ 4.964179] hub 1-0:1.0: 6 ports detected [ 4.968157] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 4.970424] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 4.973583] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfea1a000 [ 4.982142] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 4.985585] clocksource: Switched to clocksource tsc [ 4.985947] hub 2-0:1.0: USB hub found [ 4.985964] hub 2-0:1.0: 6 ports detected ... [ OK ] :: Loading module xhci-hcd ... [ OK ] :: Loading module xhci-pci ... [ OK ] addons.sh called with params modules Starting eudev daemon /addons/eudev.sh: line 6: /sbin/udevd: not found FAIL Loading 9p module modprobe: FATAL: Module 9p not found in directory /lib/modules modprobe: FATAL: Module 9pnet_virtio n [ 5.065202] geminilake_synobios: module license 'Synology Inc.' taints kernel. [ 5.067966] Disabling lock debugging due to kernel taint ot found in directory /lib/modules [ 5.075909] synobios open /dev/ttyS1 success [ 5.077510] Fail to get disk 1 led type [ 5.079010] Fail to get disk 2 led type [ 5.080529] 2022-9-9 6:27:2 UTC [ 5.081320] synobios: load, major number 201 [ 5.082367] Brand: Synology [ 5.083442] Model: DVA-1622 [ 5.084520] This is default settings: set group disks wakeup number to 1, spinup time deno 1 [ 5.087805] synobios cpu_arch proc entry initialized [ 5.089905] synobios crypto_hw proc entry initialized [ 5.091833] synobios syno_platform proc entry initialized Insert net driver(Mindspeed only)... Starting [ 5.103125] Module [geminilake_synobios] is removed. [ 5.104693] synobios: unload /usr/syno/bin/synocfgen... /usr/syno/bin/synocfgen returns 0 addons.sh called with params patches dtbpatch - patches Patching /etc.defaults/model.dtb /sys/block/sata1/device/syno_block_info 00:1e.0,01.0,07.0 - 1 '/var/run/model.dtb' -> '/etc.defaults/model.dtb' Insert synorbd kernel module Insert synofsbd kernel module Insert sha256 kernel module Assemble args: -u 66931ec7:d7112777:58f5c97e:a6a675f7 /dev/sata1p1 [ 5.212780] md: md0 stopped. [ 5.214818] md: bind<sata1p1> [ 5.217395] md/raid1:md0: active with 1 out of 2 mirrors [ 5.316757] md0: detected capacity change from 0 to 8589869056 mdadm: /dev/md0 has been started with 1 drive (out of 2). Partition Version=9 [ 5.376862] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities [ 5.407596] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null) /sbin/e2fsck exists, checking /dev/md0... e2fsck 1.44.1 (24-Mar-2018) [error]Failed to open /dev/dri/card0 /sbin/e2fsck -yvf returns 0 Mounting /dev/md0 /tmpRoot [ 5.876076] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities [ 5.899075] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: prjquota,rootprjquota ------------upgrade Begin upgrade procedure [ 6.027565] loop: module loaded [ 6.043316] EXT4-fs (loop0): couldn't mount as ext3 due to feature incompatibilities [ 6.118551] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null) Failed to found any patch No upgrade file found [error]Failed to open /dev/dri/card0 ============upgrade ------------bootup-smallupdate Failed to AssertFileKeyValueEqual value1: /etc.defaults/VERSION:smallfixnumber -> 0 value2: /tmpRoot/.syno/patch/VERSION:smallfixnumber => 3 Skip bootup smallupdate, because root is not matched to junior ============bootup-smallupdate Failed to AssertFileKeyValueEqual value1: /etc.defaults/VERSION:smallfixnumber -> 0 value2: /tmpRoot/.syno/patch/VERSION:smallfixnumber => 3 Exit on error [7] root not matched with junior... Fri Sep 9 06:27:03 UTC 2022 /dev/md0 /tmpRoot ext4 rw,relatime,prjquota,rootprjquota,data=ordered 0 0 none /sys/kernel/debug debugfs rw,relatime 0 0 addons.sh called with params jrExit [ 7.198407] VFS: opened file in mnt_point: (/dev), file: (/urandom), comm: (ttyd) [ 7.200393] VFS: opened file in mnt_point: (/dev), file: (/null), comm: (linuxrc.syno.im) [ 7.202400] VFS: opened file in mnt_point: (/dev), file: (/null), comm: (ash) umount: can't unmount /dev: Device or resource busy umount: /etc/mtab: No such file or directory [ 7.219466] VFS: opened file in mnt_point: (/dev), file: (/urandom), comm: (ttyd) [ 7.222416] VFS: opened file in mnt_point: (/dev), file: (/null), comm: (linuxrc.syno.im) [ 7.225489] VFS: opened file in mnt_point: (/dev), file: (/null), comm: (ash) linuxrc.syno failed on 7 starting pid 5390, tty '': '/etc/rc' :: Starting /etc/rc :: Mounting procfs ... [ OK ] :: Mounting tmpfs ... [ OK ] :: Mounting devtmpfs ... [FAILED] :: Mounting devpts ... [ OK ] :: Mounting sysfs ... [ OK ] [ 7.320446] md: md1 stopped. [ 7.322635] md: bind<sata1p2> [ 7.325357] md/raid1:md1: active with 1 out of 2 mirrors [ 7.339491] md1: detected capacity change from 0 to 2147418112 [ 7.354149] Adding 2097084k swap on /dev/md1. Priority:-1 extents:1 across:2097084k :: Loading module crc-ccitt ... [ OK ] :: Loading module crc-itu-t ... [ OK ] :: Loading module mdio ... [ OK ] :: Loading module fat ... [ OK ] :: Loading module vfat ... [ OK ] :: Loading module udp_tunnel ... [ OK ] :: Loading module ip6_udp_tunnel ... [ OK ] :: Loading module vxlan ... [ OK ] :: Loading module dca[ 7.567068] dca service started, version 1.12.1 ... [ OK ] :: Loading module e1000e[ 7.576955] e1000e: Intel(R) PRO/1000 Network Driver - 3.8.4-NAPI [ 7.579393] e1000e: Copyright(c) 1999 - 2020 Intel Corporation. ... [ OK ] :: Loading module igb[ 7.591184] Intel(R) Gigabit Ethernet Linux Driver - version 5.11.4 [ 7.592995] Copyright(c) 2007 - 2022 Intel Corporation. ... [ OK ] :: Loading module be2net ... [ OK ] :: Loading module ixgbe[ 7.610451] Intel(R) 10GbE PCI Express Linux Network Driver - version 5.16.5 [ 7.613059] Copyright(c) 1999 - 2022 Intel Corporation. ... [ OK ] :: Loading module r8168 ... [ OK ] :: Loading module i40e[ 7.636548] i40e: Unknown symbol auxiliary_device_init (err 0) [ 7.638839] i40e: Unknown symbol __auxiliary_device_add (err 0) [ 7.647779] i40e: Unknown symbol auxiliary_device_init (err 0) [ 7.650075] i40e: Unknown symbol __auxiliary_device_add (err 0) ... [FAILED] :: Loading module sunrpc[ 7.683324] RPC: Registered named UNIX socket transport module. [ 7.685712] RPC: Registered udp transport module. [ 7.687487] RPC: Registered tcp transport module. [ 7.689274] RPC: Registered tcp NFSv4.1 backchannel transport module. ... [ OK ] :: Loading module grace ... [ OK ] :: Loading module lockd ... [ OK ] :: Loading module nfs ... [ OK ] :: Loading module nfsv3 ... [ OK ] :: Loading module leds-lp3943 ... [ OK ] [ 7.784432] synobios open /dev/ttyS1 success [ 7.786026] Fail to get disk 1 led type [ 7.787463] Fail to get disk 2 led type [ 7.789077] 2022-9-9 6:27:5 UTC [ 7.790303] synobios: load, major number 201 [ 7.791909] Brand: Synology [ 7.792983] Model: DVA-1622 [ 7.794027] This is default settings: set group disks wakeup number to 1, spinup time deno 1 [ 7.797178] synobios cpu_arch proc entry initialized [ 7.799082] synobios crypto_hw proc entry initialized [ 7.800993] synobios syno_platform proc entry initialized mknod: /dev/synobios: File exists Starting SW init... [ 8.415405] Module [geminilake_synobios] is removed. [ 8.417153] synobios: unload :: Loading module synobios[ 8.473198] synobios open /dev/ttyS1 success [ 8.475035] Fail to get disk 1 led type [ 8.476697] Fail to get disk 2 led type [ 8.478530] 2022-9-9 6:27:6 UTC [ 8.479931] synobios: load, major number 201 [ 8.481743] Brand: Synology [ 8.482901] Model: DVA-1622 [ 8.484219] This is default settings: set group disks wakeup number to 1, spinup time deno 1 [ 8.487826] synobios cpu_arch proc entry initialized [ 8.490024] synobios crypto_hw proc entry initialized [ 8.492133] synobios syno_platform proc entry initialized ... [ OK ] lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) :: Starting syslogd ... [ OK ] :: Starting scemd :: Starting services in background Starting JuniorExpansionPack Starting findhostd in flash_rd... Starting services in flash_rd... Running /usr/syno/etc/rc.d/J01httpd.sh... Starting httpd:80 in flash_rd... Starting httpd:5000 in flash_rd... Running /usr/syno/etc/rc.d/J03ssdpd.sh... /usr/bin/minissdpd Usage: /usr/bin/[ 15.790341] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities minissdpd [-d] [-6] [-s socket] [-p pidfile] -i <interface> [-i <interface2>] ... <interface> is either an IPv4 address such as 192.168.1.42, or an interface name such as eth0. By default, socket will be open as /var/run/minissdpd.sock and pid written to file /var/run/minissdpd.pid start SSDPD failed Running /usr/syno/etc/rc.d/J04synoagentregisterd.sh... Starting synoagentregisterd... Running /usr/syno/etc/rc.d/J30DisableNCQ.sh... cat: can't open '/sys/block/sd*/device//model': No such file or directory Running /usr/syno/etc/rc.d/J80ADTFanControl.sh... Running /usr/syno/etc/rc.d/J98nbnsd.sh... Starting nbnsd... Running /usr/syno/etc/rc.d/J99avahi.sh... [ 15.863027] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null) Starting Avahi mDNS/DNS-SD Daemon cname_load_conf failed:/var/tmp/nginx/avahi-aliases.conf :: Loading module usb-storage[ 15.940827] usbcore: registered new interface driver usb-storage ... [ OK ] :: Loading module hid ... [ OK ] :: Loading module usbhid[ 15.966112] usbcore: registered new interface driver usbhid [ 15.969226] usbhid: USB HID core driver ... [ OK ] :: Loading module hid-generic ... [ OK ] :: Loading module syno_hddmon ... [FAILED] Excution Error ============ Date ============ Fri Sep 9 06:27:13 UTC 2022 blParentProcess 1 process id 6344. blParentProcess 0 process id 6347. Get event from path: /dev/input/event0 ============================== starting pid 6350, tty '': '/sbin/getty 115200 co[ 16.046034] sldlocalinstall[6344]: segfault at 0 ip 0000560308e95798 sp 00007ffcfd160600 error 4nsole' FAILED. in sldlocalinstaller[560308e90000+2a000]killall drm_tool . Failed to open drm: No such file or directory Fri Sep 9 06:27:13 2022 SynologyNVR login: [ 16.266968] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities [ 16.296501] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null) [ 16.338141] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities [ 16.362906] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null) Fri Sep 9 06:34:01 2022 SynologyNVR login: This part worries me : addons.sh called with params modules Starting eudev daemon /addons/eudev.sh: line 6: /sbin/udevd: not found FAIL Loading 9p module modprobe: FATAL: Module 9p not found in directory /lib/modules modprobe: FATAL: Module 9pnet_virtio n Thanks for your help !
-
I just did a fresh install with the alpha6 version, and still no network card detected ! My syno is under Proxmox, with virtio driver.
-
@fbelavenutoFirst of all thank you for your precious contribution ! There is an error with the compilation of alpha6 :
-
Hi there, Big mistake on my part, I wanted to upgrade to the latest version (42962) with a DVA1622. I wanted, suddenly, to put back version 42951 and I have a hash error on the pat file (in ARPL 0.4-alpha4)... Do you have a tip to get my DVA1622 working again please? Thanks
-
Develop and refine the DVA1622 loader
scfrancis replied to pocopico's topic in Developer Discussion Room
I have some experience, I'll look at your links and see what I can do... But it seems complicated, even impossible... -
Develop and refine the DVA1622 loader
scfrancis replied to pocopico's topic in Developer Discussion Room
My CPU is a Xeon(R) CPU E5-2420 with no GPU included... -
Develop and refine the DVA1622 loader
scfrancis replied to pocopico's topic in Developer Discussion Room
Yes I try 😭 -
Develop and refine the DVA1622 loader
scfrancis replied to pocopico's topic in Developer Discussion Room
Thank you for your answer, My processor is unfortunately not compatible with DVA3221... -
Develop and refine the DVA1622 loader
scfrancis replied to pocopico's topic in Developer Discussion Room
Good morning all, My processor does not have an integrated GPU. I installed an nvidia quadro K600, which I switched to "Passthrough" on my Proxmox VM. Everything is activated, but I can't get the DVA1622 display directly from this GPU, I assume that's normal, because the DVA1622 works with Intel GPUs, but there wouldn't be a way, because facial recognition does not work. Thank you for your help ! -
Develop and refine the DVA1622 loader
scfrancis replied to pocopico's topic in Developer Discussion Room
no not yet, SurveillanceStation has not been launched -
Develop and refine the DVA1622 loader
scfrancis replied to pocopico's topic in Developer Discussion Room
I did not solve my problem, by removing the SurveillanceStation package, I no longer have the problem, but I need this package. I find myself stuck! -
VM sous Proxmox : Problème espace disque
scfrancis replied to scfrancis's topic in Installation Virtuelle
Je viens de le réinstaller, et c'est reparti ! J'ai paramétré certaines de mes caméras, elle enregistrent bien, mais du coup, j'ai toujours le dossier "AUTRES" qui grossi ! Je ne comprend strictement rien. Et dans SurveillanceStation, je ne vois pas trop ce que je pourrais regarder/régler... Encore merci pour ton aide @nicoueron