c_zs

Yes, everything works fine with the DVA3221, but my problem is that after plugging into the TV on the gtx1650, I can't boot into PVE. It’s not yet the time to start the DVA3221. If I add the gtx1650 to windows, isn’t it a normal operation for the external display? I will continue to try and report if it succeeds

At present, everything is normal for DVA3221, the only problem is that the device cannot be connected to the rear interface of GTX1650. If I connect the TV to the hdmi port of the GTX1650, I cannot boot into the system after restarting pve. The Grbu configuration file is as follows: GRUB_CMDLINE_LINUX_DEFAULT="quiet intel_iommu=on iommu=pt pcie_acs_override=downstream,multifunction initcall_blacklist=sysfb_init"

arpl has support for 3219

thanks you

After I restarted pve, I found that I could shut down on the pve page. I don't know why, but it really works. If you have the same problem as me, you can try it. Note qemu agent is disabled

I'm looking for an answer just like you, but can't seem to solve it so far

Find it, there is an installation package on the forum that can definitely solve this problem,

My PVE version is ver 7.2-1, and the model is Q37. Regardless of whether the QEMU agent is enabled or disabled, calling [Shutdown] from the pve console will not work. Only calling [Stop] will take effect. I tested dva3221, ds3622xs+, they all have the same effect, what am I missing?

I modified "support_memory_compatibility=yes", the prompt disappeared, but I don't know if this will cause other problems?

Recently migrated DVA3221 from esxi platform to PVE platform, everything is perfect, except after entering dsm desktop prompt: "Detected non-synology recommended memory module configuration". ProxmoxVE: Ver7.2-1, my hardware configuration is as shown in the figure, I have tried to reinstall with various parameters, when the installation is completed with the dsm system and the storage space is created, and then reboot into the DVA3221 desktop again, I will definitely get this prompt: "Detected Memory module configuration not recommended by Synology” After various tests, it was found that: 1. Whether compiling with arpl v1.0-beta2 or compiling with tinycore-redpill.v0.9.2.9.img, this problem will definitely occur as long as the model is DVA3221 2. dva3221 is perfect under the esxi platform, there will be no such incompatibility prompt 3. I have tried other models, such as DS3622xs+, the same hardware settings will not have problems.

Please also ask, args: -device 'nec-usb-xhci,id=usb-bus0,multifunction=on' -drive 'file=/var/lib/vz/images/101/arpl.img,media=disk,format=raw,if =none,id=drive-disk-bootloader' -device 'usb-storage,bus=usb-bus0.0,port=1,drive=drive-disk-bootloader,id=usb-disk-bootloader,bootindex=999, removable=on' with args: -device 'qemu-xhci,addr=0x18' -drive 'id=synoboot,file=/var/lib/vz/images/101/arpl.img,if=none,format=raw' -device 'usb -storage,id=synoboot,drive=synoboot,bootindex=5' what is the difference

I performed the installation on the latest pve 7.2.1, using tinycore-redpill.v0.9.2.9. After the compilation was successfully restarted, the installation interface could not be opened. https://finds.synology.com/ Prompt: In the local area network DiskStation not found. Can you help me see? log.txt

gddr5, this is a feature of esxi for consumer-grade graphics cards and cannot be solved. I have decided to switch to pve

I installed a GTX 1650 on esxi and passthrough to the virtual machine DVA3221, the GPU works fine on the DVA3221 as expected, when restarting the DVA3221, the problem starts: 1. If you only restart the DVA3221 virtual machine, open the [Control Panel] of Synology and enter the [Information Center] after startup, and you will find that the GPU-related information field shows that the device cannot be found. and related hardware transcoding, "Deep Video Analytics" will not work 2. If you restart the ESXI host and start the DVA3221 there is no problem, Reason: I looked up articles online saying this is a known issue when using DirectPath I/O on unsupported desktop hardware. Even after the virtual machine is shut down, PCI devices passed directly to the virtual machine remain "locked" and require a hypervisor restart to function again. This particular problem cannot be solved other than using supported and certified hardware. Solution: I saw the solution of a netizen on the Enshan forum when the gpu was directly connected to the virtual machine Win10. The GPU was disabled through a script before the virtual machine Win10 was shut down, and the script was used to automatically enable the GPU after restarting. Manually test this way everything works. Let me ask: How to automatically disable and enable devices under pci in Synology, I hope some experts can solve this problem.

If someone is willing to share the real and effective sn/mac of DVA3221 to me for certification ame, I will be very grateful, and I am willing to provide reasonable compensation

Questions about DVA3219/DVA3221 installation certification I have a very small micro server hpe gen10 plus machine with esxi virtualization system running on it. I want to install dva3221 to use Deep Video Analytics, but after searching google and youtube, I can't find a real and effective paired sn and mac, and I can't solve the problem of AME 2.0. Now there are two options as follows: a. Install DVA3219 (with real, valid and matching SN and MAC, which can perfectly solve AME 2.0 certification) b. Install DVA3221 and stay at DSM7.0.1-42218 until the problem of AME 2.0 is solved perfectly and then install the new version Is there a better option, and can the DVA3219 be used normally if the GTX1650 is installed?

问题已解决，是自已没有认真学习造成的，不知道如何关闭问题，自已回答吧。必须要有显卡才能使用这2个功能

I installed DVA3219 in the virtual machine, and found that [deep video analytics] and [face recognition] cannot be used normally. Do these two functions have to be installed with an Nvidia graphics card to work properly? Thank you

Yes, it is installed. In fact, these options should be available directly after installing the system. These options came out after my fresh install, not sure what's causing the problem. I upgraded from 6.2.3

I am a user from China, and I used google translation, which may be the reason for the inaccuracy of the translation. What I want to express is: 1. The email settings are correct, because when there are other errors in the system, I can receive email notifications normally. 2. The problem now is that on the [Notification Settings] page, when I click "Send Test Email" (that is, the button in the red box in the figure below), the page prompts that the email has been sent successfully, but the test email cannot be received. I guess it's because of blocking automatic updates or other problems.

Recently, I stumbled upon the DS3622xs+ (system version DSM7.1.1-42962) that was booted with tinycore-redpill and installed on esxi, compared with the official system under the same version. There is a big difference in [Control Panel] -> [Notification Settings] -> Rules Options. As shown in the figure below, DS918+ is an officially purchased product, DS3622xs+ is a product installed on ESXI, and the system version is upgraded to the same DSM7.1.1-42962. But on DS3622xs+, there are no notification rules such as "system", "Package Center", "Security Advisor", "Power supply", and "Log Center". Where is the problem?

Ok, this problem is ignored, I update it manually. thank you for your reply

thank you for your reply, 1. I understand very well that this is to prevent automatic updates without knowing it. What should I do if I want to restore it? 2. The email settings are correct, because I can normally receive email notifications when there are other errors in the system. The only problem is that on the [Notification Settings] page, when I click "Send Test Email", I cannot receive emails. Test mail, although the page prompts that it has been sent successfully

I booted with tinycore-redpill in esxi, installed dsm7.1, and found the following problems: 1. Enter Synology [Control Panel] -> [Update and Restore], the status always shows: Connection failed, please check the Internet connection 2. Enter Synology [Control Panel] -> [Notification Settings], open the email, and click "Send Test Email" after setting, but the test email cannot be received. (set up exactly right, and get email notifications in case of system errors)

I installed ESXI 7.0 Update 3 on the physical machine HPE Gen10 Plus, the virtual machine with the physical hard disk pass-through, and allocated 50g of space as the program disk, used tinycore-redpill as the boot program, and set SataPortMap=184, DiskIdxMap=100400, so that the first physical disk of my machine is displayed as hard disk 1, and the 50G space is displayed as hard disk 5. The Synology version is 7.1.1-42962. When I switched the bootloader from tinycore-redpill to ARPL, I found the following problems: 1. The hard disk information in the storage manager is disordered (SataPortMap and DiskIdxMap have the same settings) 2. After the machine is entered, it is displayed as a new machine. All applications installed on it are not displayed, but the data on the hard disk is still there. When I switch the bootstrap back to tinycore-redpill again, everything works fine