gregos

Hello! Video station doesn't show any videos or folders after update to 7.2-update 3 (DS-3622xs). Before the update everything was working fine, i could watch any videos through the app on my samsung tv or my mobile phone. The loader is the latest TCRP. I tried to reinstall Videostation, remove the folder, then re add videos, reindex everything, even photos.... I also have a factory DS-218j with also DSM7.2-64570, and the videostation works just fine on that. Do any of you guys have any idea how can i make that work on my 3622xs?

Hello Guys! I need some help, as i can not login to DSM because of the 2FA issue. I was trying many different methods as workaround, but still no luck. I was coming from tcrp 0.8.0.0 ds3622xsp loader DSM 7.1.1-42661 to ARPL latest and DSM 7.1.1-42962. Everything went fine with the update (almost), now i can reach DSM GUI, but can not login (email sending with forgotten password is not working either, when i give the 6digit verification code, it says theres some error, contact sysadmin). I tried to SSH into the NAS, but it's not enabled, and i did not find any solution to enable it. I don't have any other admin account without 2 factor authentication. I tried to go back to tcrp loader even with withfriend option, but in that case DSM won't appear. Is there any other method to save my config + files, or there's no way. (I mean method like reset1 on orig. synobox). Thank you!

Is there any way to reset login creditanials (like on a physical synology NAS reset Method 1) from command prompt (when loader is booted "root@arpl" or if i go to configure loader option, and then ssh into there ? Or there's no way doing that. If thats possible, can you please tell me how? Thanks

Hello Guys! I need some help, as i can not login to DSM because of the 2Fa issue. I was trying many different methods as workaround, but still no luck. I was coming from tcrp 0.8.0.0 loader DSM 7.1.1-42661 to ARPL latest and DSM 7.1.1-42962. Everything went fine with the update (almost), now i could login to DSM GUI, if i wouldn't face this problem. I tried to SSH into the NAS, but it's not enabled, and i did not find any solution to enable it. I don't have any other admin account without 2 factor authentication. I found the live linux way solution, but i couldn't mount system partition, i have no idea why. (i was trying to find the 2Fa file mentioned by someone on this forum). I'm not familiar with linux commands ,also i'm not an IT expert, but i really want to save my settings / files. (Synology Drive client and mapped network drives are fine - which were logged in prior to update). Do any of you have any idea how to save it? Thank you!

Thank you! I'll try that.

Hi! I'm using TCRP. With the previous DSM i was using Jun's mod. Also i checked the USB VID&PID, seems to be matching with the flash drive's VID&PID.

I understand that. I was able to install the 7.1dsm, i only have to rebuild the bootloader in case any restart. Also i use the real mac address of the NIC. Other then that i was able to use it for the last week. Today i only had to reboot it, thats when the issue occured. I'm not sure if the serial has to do anything with the reboot issue. I think if there was any problem with the serial, i wont be able to install the 7.1 itself. But if you think it is the problem i'll try to do a serialgen. Thank you very much for the help!

Yes, i'm using the same usb, same lancard. Everything is the same. It was just an update from dsm 6.2.

Hi! I manually editid the user_config.json because if i don't , with the commands you posted above, i could never achieve my serial and mac to be the same (as before). I manually copied the satamap, serial, usb PID & VID from previous dsm's grub.cfg, in this way i could keep my serial, mac, etc.....

Hi! Its an Intel motherboard ,I3-3240 CPU, 16Gb Ram -- Baremetal. For bootloader rebuild i only use : ./rploader.sh build broadwellnk-7.1.0-42661 then ./rploader.sh clean now; rm -rf /mnt/sdb3/auxfiles; rm -rf /home/tc/custom-module; ./rploader.sh backup now; Then sudo reboot After this everything works as before. If I restart the NAS, it goes to synology web assistant page, then asks for install. If i rebuild tcrp bootloader, then everything back to normal....

Hi Guys! I succesfully installed dsm 7.1, but i have some issues. After each reboot, i have to rebuild loader, as after reboot, when i go to the ip of nas, it says, it needs to be installed (as per the first install). If i rebuild the loader, i can then use the nas as before (with existing users and settings intact). Does anyone have a solution for this? Thank you!

Hello! Thank you, i'll have a look..

Hello Guys & IG-88! Can you please help me out! Since my last post, i built a test nas, with same config as the current baremetal. I have no sucess with this update.... So i use JUN's mod, ds3617xs as base, and modified the vid& pid& serial& sata port map etc. manually at tc's user_config.json.... At my latest trial, i left the ./rploader.sh serialgen; identify.... etc steps, went to image build straight forward, but i still lost my serial, mac, etc.... And when i try to install DSM from browser, it always says .pat is damaged, and can not finish update (in this case i did not care serial, different IP address etc.) i just wanted to try if i can even install 7.1 from 6.2 ..... So basically i would like to get some help, what to do step by step for updating my DSM 6.2 preserving all my config, data, serial, mac etc... (from Jun's Loader) to TC 7.1 .... Maybe i just miss some steps or i have no clue..... Thank you!

Thank you I'll give it a try ... Let's see if i can do it

Hi IG-88! Can you please tell me where can i find the user_config.json to move to the new loader? As i can not find it.... On the redpill flashdrive i can see them, but i can not map drives to my old pendrive, so i can not move serial & mac.... (i created the redpill loader following the tutorial on this forum, including ssh, rploader commands, etc. on a spare hdd, with a spare pendrive.) Thanks in advance! Gergely