Carl10
Member-
Posts
28 -
Joined
-
Last visited
Recent Profile Visitors
The recent visitors block is disabled and is not being shown to other users.
Carl10's Achievements
Junior Member (2/7)
8
Reputation
-
@gadreelThanks for the reply. I know I can't create Synology service on my Xpenology machine (nor was that my intent of my post). From what I discovered if I had two DS220's I would still only require one account for both machines but seperate ID's /labels (which never having done that may be the same thing). With my one DS220 I could do everything I need, but only wanted that machine for backups, not to run surveillance. As I am sure others have both types of machines I was wondering through CMS (have not found a way using this tool) or other method I could achieve my goal. By your reference to DDNS are you referring to remote access to my Xpenology unit? For that I use Tailscale. If that was not your reference I apologize for misunderstanding. Thanks again.
-
Has anybody created a Quick Connect account on a Synology unit and used it on Xpenology (both on the same LAN)? I have an Xpenology rig working fine running RP DSM 7.1 and know I cannot create a Quick Connect account. I just purchased a used DS220+ Synology for backing up my main unit and can create an account with the real Synology unit. I don't necessarily want or need the Quick Connect feature but have run into needing an account to setup Chat so I can push video surveillance of my front door to my phone on people detection. The Surveillance Station is on the Xpenology rig, so I want to use the Quick Connect account from DS220 on my Xpenology rig. Any help would be appreciated.
-
Thanks @Piteball! I was using "......activebackupoffice365.activation@method...." instead of just "...activebackupoffice365&method....." I just needed to drop the ".activation" and all was good. Appreciate the help.
-
Has anyone been able to get this to work on Active Backup Microsoft 365? I have used the above method successfully for the Standard version of backup but can't get this working. I have tried replacing the phrase ActiveBackup with: activebackupforoffice365 activebackup-office365 activebackupoffice365 in the activation url but keep getting error 102 (unknown API) ......ActiveBackup.Activation&method=set&version=1...... I got these variations from the activation window of the actual package. Any help would be appreciated.
-
I started from scratch since I didn't enable SSH the first time and have successfully commented out the cpufreq. Really big thanks for all work on this project and the guidance to get me through this upgrade! (I sure have learned a lot in the last few weeks!)
-
I tried the extension but Jumkey does not have a DVA3221 build and I got this message: ./rploader ext denverton-7.0.1-42218 add https://github.com/jumkey/red pill-load/raw/develop/redpill-misc/rpext-index.json -sh: ./rploader: not found Dogodefi did the DVA build but could not find a similar extension that repository.
-
Thanks @pocopico I added sudo and it appears to complete as shown but the build still powers down on access Done, closing tc@box:~$ ./rploader.sh mountdsmroot now Succesfully mounted under /mnt/dsmroot Checking if patch version exists Patch directory exists DSM Root holds a patch version 7.1-42621-0 tc@box:~$ sudo sed -i 's/^acpi-cpufreq/# acpi-cpufreq/g' /mnt/dsmroot/usr/lib/mo dules-load.d/70-cpufreq-kernel.conf && cat /mnt/dsmroot/usr/lib/modules-load.d/7 0-cpufreq-kernel.conf cpufreq_stats processor # acpi-cpufreq cpufreq_performance cpufreq_powersave tc@box:~$
-
After several failed attempts at this upgrade I wanted to provide my test results. I successfully proceed through all the steps including ./rploader.sh postupdate denverton-7.0.1-42218. When I apply the fix I get one of two errors as so shown below 1) No such file or directory or 2) Permission denied. Any help would be appreciated. Unmounting dsmroot -> OK !!! Done, closing tc@box:~$ ./rploader.sh mountdsmroot now Succesfully mounted under /mnt/dsmroot Checking if patch version exists Patch directory exists DSM Root holds a patch version 7.1-42621-0 tc@box:~$ sed -i 's/^acpi-cpufreq/# acpi-cpufreq/g' /mnt/dsmroot/usr/lib/modules -load.d/70-cpufreq-kernel.conf && cat /mnt/dsmroot/usr/lib/modules-load.d/70-cpu freq-kernel.conf sed: can't read /mnt/dsmroot/usr/lib/modules-load.d/70-cpufreq-kernel.conf: No s uch file or directory Unmounting dsmroot -> OK !!! Done, closing tc@box:~$ ./rploader.sh mountdsmroot now Succesfully mounted under /mnt/dsmroot Checking if patch version exists Patch directory exists DSM Root holds a patch version 7.1-42621-0 tc@box:~$ sed -i 's/^acpi-cpufreq/# acpi-cpufreq/g' /mnt/dsmroot/usr/lib/modules -load.d/70-cpufreq-kernel.conf && cat /mnt/dsmroot/usr/lib/modules-load.d/70-cpu freq-kernel.conf sed: couldn't open temporary file /mnt/dsmroot/usr/lib/modules-load.d/sed4wvTqh: Permission denied tc@box:~$
-
Video Card Update: I have replaced my original ASUS GTX 1650 card with this card: This is a picture from a review done of DVA3221 by NASCompares. So I bought the ASUS version of this card and it was recognized right away. There are 4 or 5 different ASUS versions of this card at my local store so I wanted to share what Synology uses and what worked for me. The differences I could find between the two cards is: ASUS TUF GTX 1650 (card did not work in my build with MSI X99S SLI Plus MB. Card provided video for TC on MSI MB and worked in another windows machine) -DDR6 Memory -External 6 pin power required ASUS Pheonix GTX 1650 (similar to picture) - Worked right away -DDR5 memory -Bus powered (no external supply required) I post this to help anyone looking for a card. I only received feedback from two people that have running cards and they both appeared to be bus powered cards as well. One for sure had DDR5 memory.
-
I have tried the update and am not getting the ./rploader.sh mountdsmroot now to execute correctly. I applied it after the postupdate and recived a permission denied error. I then tried it before the post update and did not see any errors but it shuts down on access. I've seen comments that others like @PaulEvo have upgraded successfully. If anyone that has upgraded if you could clarify where and how the ./rploader.sh mountdsmroot now instruction should be executed I would appreciate the help.
-
Thanks @pocopico that solved the custom_config.json file issue. For clarification I had to run ./rploader.sh update now first for that to work, then everything was updated on the USB. I am trying to solve my GPU issue on this DVA build which requires a GTX 1650 video card. Inside DSM my GPU is listed as "unkown error" . When I run the build I get: Found VGA Controller : pciid 10ded00001f0a Required Extension : No matching extension I have gotten that message on the DS builds as well, but no video card is expected. My MSI X99S SLI Plus MB does not have integrated graphics and don't know if I need an extension since this build seems to load the required nvidia library. 2022-03-30T20:13:29-05:00 DSM7 synocheckuser[7074]: synocheckuser.c:1116 check user data finished 2022-03-30T20:13:31-05:00 DSM7 kernel: [ 36.956256] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 440.44 Sun Dec 8 03:38:56 UTC 2019 2022-03-30T20:13:32-05:00 DSM7 synonetseqadj[7190]: synonetseqadj.c:421 Error internal NIC devices 1 does not equal to internal NIC number 4 2022-03-30T20:13:37-05:00 DSM7 kernel: [ 38.069386] Get empty minor:104 Any advice would be appreciated.
-
I have tried both as my system can handle either Interesting that was dropped from original instructions, it eliminated the parse errors but still get the error: platform not found. Which would be expected as denverton is not included in the custom_config.json file from the image. Replacing that file with the version from the repository, the build completes. Is everyone replacing that file?
-
My bare metal install process (Is yours the same? I am having video card issues and want to verify everything else I am doing is correct): Download image 0.4.6 from @pocopico repository GitHub - https://github.com/pocopico/tinycore-redpill unzip and rufus to USB boot target machine in TC run winscp and connect to target machine ***************** replace custom_config.json dated March 9th with current version in repository (otherwise March 9th version does not have denverton build info & I get parse errors trying to build) ************************* enter Putty and run: sudo ./rploader.sh update now sudo ./rploader.sh serialgen DVA3221 now sudo ./rploader.sh satamap now sudo ./rploader.sh identifyusb now sudo ./rploader.sh build denverton-7.0.1-42218 copy pat file from usb and reboot ***************Is everyone manually replacing the custom_config.json file?*********************** Thanks for any help.
-
Anybody running with a 1650 card could you please let me know your card model and memory information (thanks spv4u1975 for your specifics). I want to get a different card and want to make sure it is not a specific component/type of card since cards are limited in availability Mine is an overclocked edition: MFG: ASUS Model: TUF GTX 1650 04GD6 Memory DDR6 Thanks for any help.