Hi:
I was using Jun's Loader v1.04 to install DSM 6.2.3-25426(DS918+) on my physical PC successfully.
Here is my PC's equipment:
i7-7700, GA-Z270X-Gaming K5, INTEL 82575's NIC, SATA SSD, Intel760p NVMe M.2 SSD
I installed the DSM to SATA SSD on the 2nd SATA slot.
I'd like to accelerate I/O speed via NVMe's SSD being system cache, but the NVMe SSD is not appeared on Storage Manager, as following figure:
I was trying to get some message on the SSH terminal.
walt@walt:/$ lspci -v
0000:01:00.0 Class 0108: Device 8086:f1a5 (rev 03) (prog-if 02)
Subsystem: Device 8086:390a
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at efa00000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: nvme
walt@walt:/$ ls /dev/nvme0*
/dev/nvme0 /dev/nvme0n1 /dev/nvme0n1p1 /dev/nvme0n1p2 /dev/nvme0n1p3
It seems that the Linux Kernel can detect the NVMe SSD device, but Storage Manager of DSM cannot.
Do I miss something?
Thanks in advanced.