albebert

Hi, i'm currently switching from a xpenology to a DS1813+. I wan't to use esata ports as internal. When i modify the synoinfo from : esataportcfg="0x300" internalportcfg="0xff" usbportcfg="0x3f0000" to esataportcfg="0" internalportcfg="0x3ff" usbportcfg="0x3f0000" then reboot (without esata plugged) : ok plug sata drives : ok show as internal. But if i reboot with esata plugged the nas won't boot and go into recovery and need to reinstall it. any idea why i have this issue ? Thanks a lot

Hi, i've the same issue. Failed to get MyDS Account. Start to init host with id: 21a71f7b-9592-4498-be9a-05cfac29d3e6 Failed to get first mac of DS. Failed to get the first mac address. Failed to add host info to dashboard Rollback create cluster mac address is ok for me 3: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master ovs-system state UP qlen 1000 link/ether f4:8e:38:bb:c2:00 brd ff:ff:ff:ff:ff:ff inet6 fe80::f68e:38ff:febb:c200/64 scope link valid_lft forever preferred_lft forever 4: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq master ovs-system state UP qlen 1000 link/ether 00:10:18:14:30:21 brd ff:ff:ff:ff:ff:ff inet6 fe80::210:18ff:fe14:3021/64 scope link valid_lft forever preferred_lft forever set sn=A8ODN02468 set mac1=f48e38bbc200 set mac2=001018143021 for information the network cards are in LACP if anyone can help me thanks in advance

i use MegaCli tool to find wich disk is wrong. i plan to use SHR2 and split disk over multiple card. and of course i do backups ^^ by past my nas was made with this card with disk in raid0 mod and mdadm (such as DSM do) with 3Tb disk i've multiple disk failure in 5 years and no data loss ... before i lost simultaneously 2 disk failures (1 on motherboard and 1 on LSI) but i will try some disk faillure before going to "production" thanks for advices

Hi all, si no IT firmware for my LSI 9260, but with a standalone disk in raid0 synology see it ! the cons : no smart value report to DSM ... going to script MegaCli to check out this thanks all for you reply !

ok thanks all for answer. i see that dell perc can be flashed with IT firmware and seems to work with Xpe i will give it a try because i've a perc 5i (sata2) and LSI 9260 8i MegaRAID

I don't know if i can disable onbard controller i will try. i have 2 ports on additional pci sata card that are not working (DSM don't see disk on it) so if 6 disk are OK on second controler when the onbaord is disabled, i need to test idx/portmap ? but there is any documentation about this ? i don't found any doc about this

ok thanks i use this pci card : https://fr.aliexpress.com/item/4000433136783.html?spm=a2g0s.9042311.0.0.f3796c373b0sv2 in 6 port version. seems to have a port multiplier there is the lspci result : ... 0000:00:1f.2 RAID bus controller: Intel Corporation SATA Controller [RAID mode] (rev 02) .... 0001:06:00.0 Non-VGA unclassified device: Marvell Technology Group Ltd. Device 1475 (rev ff) 0001:08:00.0 Non-VGA unclassified device: Marvell Technology Group Ltd. 88SE9235 PCIe 2.0 x2 4-port SATA 6 Gb/s Controller (rev ff) .... if anyone can help me, i will try to find documentation for DiskIdxMap and SataPortMap but with a quick search i don't find any usefull stuff at the moment.

Hi, i've made a custom xpenology based on a core2quad IPIBL-LB HP motherboard (a old desktop). the CM has 6 sata ports and i've added a pcie 6 sata ports card. but DSM does'nt see 2 ports from the additional card. if i boot on a linux i see all my disk but DSM don't :( any idea why ? Many thanks in advance

Hello all i'm french so excuse my bad english please. I know that XPEnology works great on VMWare ESXi or VBox but i wan't to install it on a Proxmox VE Server using KVM virtualization. Anyone have allready made this ? I'm a noob on XPEnology how make test ? witch img of XPEnology for test ? Thanks

j'ai regarder dans la version anglaise j'ai rien trouver. je commence par poster ici étant plus à l'aise en français mais si j'ai aucune réponse je posterais coter anglais on ne sais jamais.

Bonjour, j'ai regarder un peu du coter de la virtualisation de XPEnology, j'ai trouver pas mal d'info sur esxi ou VBox mais rien sur Proxmox ou KVM. est-il possible d'installer XPEnology sur un KVM ? il y a-til une build particulière ? étant nouveau sur XPEnology quel peux être le process pour tenter de l'installer sachant que le matos émulé par KVM est asser proche de ESXi ? Merci de votre aide