Jump to content
XPEnology Community

hiliger84

Member
  • Posts

    23
  • Joined

  • Last visited

Everything posted by hiliger84

  1. I'll get to work, let's hope for the best I will write updates on the progress Thanks again for everything
  2. First of all thank you thank you thank you again for the patience you are having with me Having said that, I'll try to answer your questions now As mentioned, I would prefer not to use external cases because I don't have enough space. I have just enough space to have NUC and external drives stacked This has already been answered above I will try to use this internal power port both to power the internal disk and to power the external ones that I will connect to the M2 adapter. M2 adapter for 6 sata port For the power, I have to link this adapter external with this adapter internal If it doesn't cope with the power, I have to look for an external power supply, like the one you linked below This has already been answered above I understand, it's possible I understood everything? do you recommend anything else?
  3. I'm sorry if I ask you to make me understand better. Maybe it's also my bad English that doesn't make me understand well. first question: what is the point of using a sata-esata adapter and bringing an esata port outside the nuc? I still have to use an external power supply for the disk, right? second question: externally how can I connect multiple disks to this single e-sata cable? I don't prefer the mediasonic solution because I have little space where the nuc is located third question: currently, as already explained previously, internally I have a 2.5 disk connected to the internal SATA port but there is also a power port for the disk. Can't I use that to bring power externally? another question: if I instead used an m.2 adapter with 6 sata ports, could I use external power or the internal power port explained above? last question: if I bring the sata port externally (with also power port or not) or e-sata, how can I connect multiple sata disks to it? I attach some photos relating to the questions thank you so much for the support you are giving me and sorry again for my English
  4. does this cable need external power? but the nuc doesn't have esata port
  5. At this point, is there a possibility to install Xpenology directly on the NUC and add the disks all with USB and create raids?
  6. First of all, thank you very much for your answers. You're right, I hadn't thought of that
  7. Can i use it? https://a.aliexpress.com/_Ejyiswj 5 Sata port for raid disk and one for dsm
  8. I'm sorry, how did you install 7.2? Which loader and .pat did you use? and which synology model? Thank you very much
  9. Hello lads, I need help, I'll explain my configuration first. I have a NUC8i7 with an internal M.2 (here I installed Proxmox and Plex, XPenology, Home Assistant and PiHole VMs) and a 2.5 Sata disk. So I have externally 3 2.5 drives via USB and configured one to Plex and two to Xpenology. In one of the VMs I have Xpenology DSM7 found here on the forum with the image ready for Proxmox (I'm honest, I couldn't create the VM from scratch) Apart from the fact that every now and then I find a faulty disk on Xpenology (I have them in RAID1 and I have also replaced them, I always have the same problem), I am undecided whether to definitively give up Proxmox and have Xpenology as main system on which to start VM. What do you recommend? I would also be tempted to put an M.2 adapter with Sata ports to add the disks, but there I would have the problem with the NUC which doesn't have any internal space. Also, importantly, is there a possibility on Xpenology (and therefore on a Synology in general) to protect disks? In the sense that I use these discs for personal photos and videos. Is there any way to make sure that if I were to unplug a disk and plug it into another pc (windows or linux), there would be no way to view private files? Thank you
  10. Ciao ragazzi, avrei bisogno di aiuto, vi spiego prima la mia configurazione. Ho un NUC8i7 con internamente un M.2 (qui ho installato Proxmox e le VM Plex, XPenology, Home Assistant e PiHole) e un disco Sata da 2.5. Quindi ho esternamente 3 dischi da 2.5 tramite USB e configurati uno su Plex e due su Xpenology. In una delle VM ho Xpenology DSM7 trovata qui sul forum con l'immagine già pronta per Proxmox (son sincero, non sono riuscito a crearmi da zero la VM) A parte la questione che ogni tanto mi ritrovo un disco in fault su Xpenology (li ho in RAID1 e li ho anche sostituiti, ho sempre lo stesso problema), sono indeciso se mollare definitivamente Proxmox e avere come sistema principale Xpenology su cui avviare VM. Cosa mi consigliate? Sarei anche tentato di metterci un adattatore M.2 con porte Sata per aggiungere i dischi, ma lì avrei il problema col NUC che spazio interno non ne ha. Inoltre, cosa importante, c'è possibilità su Xpenology (e quindi su un Synology in generale) di proteggere i dischi? Nel senso che io uso questi dischi per foto e video personali. C'è possibilità di fare in modo che se dovessi staccare un disco e collegarlo ad un altro pc (windows o linux), non ci sarebbe modo di visualizzare i file privati? Grazie
  11. thank you very much, yes I am interested in 7.2 if possible. Currently I use 7.1.1 I don't understand, what's the problem with 7.1?
  12. hello all, is there a backup of version 7.2?
  13. hello, thanks for sharing after importing the file, should i edit or start directly? and how do i access it? with the ip address?
  14. Ma infatti, mi basterebbe anche rifarla da zero seguendo una guida e non un'immagine già pronta. Chiedevo dell'aggiornamento in quanto leggevo qualche nuova funzionalità dalla 7. Ora mi leggo quanto linkato, grazie
  15. perdonami, come ti potrei riportare queste info richieste? Considera che, poiche' non riuscivo in nessun modo ad installare xpenology su una vm di proxmox (utilizzo un Intel NUC), ho utilizzato un immagine VM gia' pronta con queste info recuperate nel centro informazioni: Nome modello: DS615xs Versione DSM: DSM 6.2-23739
  16. però io uso xpenology su una VM sotto proxmox (NUC). Suppongo quindi che devo prima aggiungere lì il nuovo disco per farlo vedere alla VM E ne approfitto per fare una domanda diversa: non esiste modo per aggiornare xpenology? sono fermo alla 6.x e non mi permette di aggiornare
  17. Ciao a tutti, ho un RAID 1 e per la prima volta mi segnala che uno dei 2 dischi risulta danneggiato. Non riesco a ripararlo da lì vero? Nel caso dovessi sostituirlo, come fare? C'è una procedura particolare oppure devo staccare il disco danneggiato e attaccare quello nuovo?
×
×
  • Create New...