Jump to content
XPEnology Community

djtech

Rookie
  • Posts

    1
  • Joined

  • Last visited

Everything posted by djtech

  1. Lanner-FW-7541c is a network firewall or appliance. It has 6 Gig ports 2 usb ports and a serial console port. For right now it only has a single 30gb SSD inside but I am going to add a larger internal SSD when I get t all worked out. I have it up and working fine except for a few issues. I thought the 6 ethernet ports would not be any issue but that's my breaking point right now. Lan1 is 192.168.0.1 Lan 2, 3, 4, 5 are 192.168.0.40 to 44. Lan 6 is a static IP address from my ISP. The whole reason for this appliance is to run a reverse proxy between lan 6 IP internet address and a server on my local machine. All that is actually working great. The issue is that the lan port will not pass DHCP addresses through Lan 1 so anything plugged into lan 2,3,4, or 5 can't see Lan 1 and Lan 1 can see the the other Lans either. I have tried creating static routes. Firewall is disabled so that should not be it. I can find any information on bonding the ports to create a switch either. For now I am just stuck on only using 2 ports.
×
×
  • Create New...