M3kk

This is a good question! I am running a N40L but am holding back until this has been clarified I just tried booting on an HP Gen8 Microserver and had no ethernet or USB keyboard available once the login prompt was displayed. Re-loaded 5.1-5055 on the USB stick and all was back to normal. I'll wait and see how this develops but thanks for the effort so far! Gen8 Microserver here and the update went well..

Someone using LSI (IBM) M1015 raid controller in this board (the Q1900B-ITX one)? I`m curious if the PCI-E G2 1x port can handle the theoretically max BW (500 MB/s) or my LSI will be limited? Ty.

My issue is with md3. And no they were all new hdds.. why my volume1 lives in 2 mds? This is the question..

Ok, thank you. I managed to install. I needed to set in the BIOS to "OS Controlled" and to install the cpufrequtils.

Also, the rebuild for the MD2 was ~180xxx K/sec, but here is only ~45K-50K/sec. Why? PS: i modified the /proc/sys/dev/raid/speed_limit_max and /proc/sys/dev/raid/speed_limit_min values to 300000 .

Hello, i have a HP Gen8 Microserver with 4x3TB HDDs in SHR. I have only one Volume (Volume1), but i have /dev/md3 too, why? Its normal? Gen8_NAS> cat /proc/mdstat Personalities : [linear] [raid0] [raid1] [raid10] [raid6] [raid5] [raid4] md3 : active raid5 sdb6[3] sdd6[0] sdc6[2] sda6[1] 1953292672 blocks super 1.2 level 5, 64k chunk, algorithm 2 [4/4] [uUUU] [>....................] reshape = 4.2% (41991036/976646336) finish=328.3min speed=47438K/sec md2 : active raid5 sdb5[7] sda5[5] sdd5[4] sdc5[6] 5846338944 blocks super 1.2 level 5, 64k chunk, algorithm 2 [4/4] [uUUU] md1 : active raid1 sdb2[3] sdd2[2] sdc2[1] sda2[0] 2097088 blocks [12/4] [uUUU________] md0 : active raid1 sdb1[1] sda1[0] sdc1[2] sdd1[3] 2490176 blocks [12/4] [uUUU________] unused devices: PS: Hes rebuilding, because i had 4x2T, and i swaped them 1by 1 with the 3T ones (this is the last 3T one).. Until the 3th 3T i had md0, md1, and md2, not md3 too. At other Gen8, where i have 4x 3T from start i have this: Nas> cat /proc/mdstat Personalities : [linear] [raid0] [raid1] [raid10] [raid6] [raid5] [raid4] md2 : active raid5 sda5[0] sdd5[3] sdc5[2] sdb5[1] 8776594944 blocks super 1.2 level 5, 64k chunk, algorithm 2 [4/4] [uUUU] md1 : active raid1 sda2[0] sdb2[1] sdc2[2] sdd2[3] 2097088 blocks [12/4] [uUUU________] md0 : active raid1 sda1[0] sdb1[1] sdc1[2] sdd1[3] 2490176 blocks [12/4] [uUUU________] unused devices:

I followed the guide, i tries it, then i read this topic, then i come with questions . Gen8_NAS> cpufreq-info -ash: cpufreq-info: not found

Chill, i did.. u seen my first quote? Gen8_NAS> echo conservative > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor -ash: can't create /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor: nonexistent directory Gen8_NAS> cd /usr/local/etc/rc.d/ Gen8_NAS> ls S99PowersavingINTEL.sh I dont have the /sys/devices/system/cpu/cpu0/cpufreq/ dirrectory.. Gen8_NAS> cd /sys/devices/system/cpu/cpu0 Gen8_NAS> ls cache cpuidle crash_notes thermal_throttle topology Gen8_NAS>

Hello, tried this on Gen8 Microserver with G2020T. Gen8_NAS> /usr/local/etc/rc.d/S99PowersavingINTEL.sh grep: /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor: No such file or directory /usr/local/etc/rc.d/S99PowersavingINTEL.sh: line 7: can't create /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor: nonexistent directory grep: /sys/devices/system/cpu/cpu1/cpufreq/scaling_governor: No such file or directory /usr/local/etc/rc.d/S99PowersavingINTEL.sh: line 7: can't create /sys/devices/system/cpu/cpu1/cpufreq/scaling_governor: nonexistent directory Gen8_NAS> insmod /lib/modules/powernow-k8.ko insmod: can't insert '/lib/modules/powernow-k8.ko': No such device What i need to do?

Hi M3kk may i ask you sthg ? I am trying to Buy a HP Proliang G7 N54L but cannot find it in market (Greece). If i buy G8 what's the differences in order to install Synology 5.x Software. WIll i face any incompatibilites (S/W or Hardware or BIOS e.t.c)? Please advice. THanks you in advance. Hi, I'm using some gen8 with XPenolgy since months, and no issues for me . Sent from my CloudMobile using Tapatalk

You can use Virtualbox from synology to ntall that Win8 . Sent from my CloudMobile using Tapatalk

For sure u cant sleep on it . Sent from my CloudMobile using Tapatalk

Both, but actually i`m using the USB method + phpVirtualbox for virtual machines. I use the iLo and Bios version from here: viewtopic.php?p=29256#p29256 and no noise issues .

Save your bios settings as user config, then wont reset them . Sent from my CloudMobile using Tapatalk

ESXI or USB? If USB, then its simple:

I'm using DSM 5, working perfect. About plex dont know, i dont like to use any DLNA who using transcoding (i'm using serviio, with transcoding disabled). I wish to use twonky too . Sent from my CloudMobile using Tapatalk

Yeah. There is a bios that lower the fan even to 5-12% (with AHCI). I will post the link to it soon. (Atm i'm from phone). Sent from my CloudMobile using Tapatalk LE: Bios ftp://ftp.hp.com/pub/softlib2/software1 ... 401/v98895 , also the 2.03 iLo FW http://h20564.www2.hp.com/hpsc/swd/publ ... nvOid=4138 Extract both, and upload them with the current iLo ..

How many drives u have? U want any protection? I mean raid? Sent from my CloudMobile using Tapatalk

Yes, is that easy . Sent from my CloudMobile using Tapatalk

5. 4 in bays. 1 in idd bay, there is a single s-ata port inside. Sent from my CloudMobile using Tapatalk

Or use the m1015 at it mode . Sent from my CloudMobile using Tapatalk

No, i had XPenology set and working with 5.0.3.1 (from SD card), i put 5.0.3.2 on USB stick, i booted from it, and it was OK .

Eventually how i could see what .ko file is for this Synology Remote? Maybe i can try with insmod cmd... hey sorry for my bad english, i'm in the same configuration, have you find any idee to use your synology remote? thanks for help Ok, with Nanoboot 5.0.3.2 is Ok . Sent from my CloudMobile using Tapatalk

With gnoboot is Ok.. With nanoboot, at system information i can see the device, but doesnt work . No ideea why.. Sent from my CloudMobile using Tapatalk

Eventually how i could see what .ko file is for this Synology Remote? Maybe i can try with insmod cmd...