LeoDaso

Good Day, I've done some searching and can't seem to find an answer on my issue. I have a bare metal that I upgraded/migrated from DSM 6.2. I am using Redpill TinyCore. UEFI boot. I have 6x SATA drives plugged into the onboard Intel controller, and 8x SATA drives plugged into a LSI 9211-8i HBA. This setup worked fine on DSM 6.2 918+ Jun ./rploader.sh satamap detects the onboard SATA, and my HBA, but wants to use: SataPortMap=6 I've tried to change this manually to SataPortMap=68 and DiskIdxMap=0006, but this doesn't help even after recompiling. I've even tried removing statportmap and diskidxmap. I was able to get the 6x drives to detect, and DSM 7.2 is running. What am I missing to get the other 8x SATA drives detected on my HBA? Also tried to add the

IG-88, with your instructions, I was able to restore my baremetal back to 6.2.3 from 6.2.4. A couple notes I will add, this could be specific to my setup. I am using Jun1.04b DS918+ 1. I didn't have luck with "System Rescue CD". It couldn't "apt-get install mdadm lvm2". I used a Ubuntu 14.04.6 USB drive. I then continued to follow the steps to mount the Raid 1 and delete the files and folders specified in your guide. 2. I was having difficulty understanding how to mount the RAID. I have 8 drives in a SHR and another 6 drives in a SHR. After trying to run the commands in https://xpenology.com/forum/topic/7004-tutorial-how-to-access-dsms-data-system-partitions/ all of a sudden a /media/14.xx.xxxxx (I can't remember the numbers) was mounted. I was able to then delete the files/folders in your guide. 3. Fixed the boot USB drive as guided. I was then able to see the system from Synology Assistant. I uploaded the DSM_DS918+_25426.pat. System rebooted a few times. All my settings were back like nothing happened. I did need to go into Storage Manager and fix the System Partition. Thanks again!

Outcome of the update: FAILED - DSM version prior update: DSM 6.2.3-25426 Update 3 - Loader version and model: JUN'S LOADER v1.03b - DS3617xs - Using custom extra.lzma: NO - Installation type: BAREMETAL - MB: Supermicro C7Z170-SQ, i5-6500 - Notes: Loader boots normally, no hard drive activity.