Jump to content
XPEnology Community

rufik

Transition Member
  • Posts

    10
  • Joined

  • Last visited

Everything posted by rufik

  1. It seems that I've fixed my installation I've flashed tinycore-redpill-uefi.v0.9.4.9.img and operated m-shell by downloading it from github. Now I've flashed tinycore-redpill-uefi.v0.9.4.3-2.m-shell.img and automatically got menu. Then configured & built 7.2.0-64570 via menu using JOT and viola! It's working now! Thank you Peter for your instant support.
  2. Well, i'd like to get out of this issue, no matter if it's fiend or jot My setup is still the same Futro S720 with AMD GX-217GA + 4GB RAM + ASM1061 PCIe to SATA 3.0 adapter. Internal SSD is m.2 SATA as far as I remember. ASM1061 is used to attach 2x3.5 HDD. What "menu" are you talking about? How to bring it up? Is it possible to rebuild loader to match DSM somehow?
  3. I was running DSM-7.1-42661 U1 DS3622xs+ on baremetal and I've decided to upgrade to 7.2.0-64570. So I went as follows: manually installed 7.2 via GUI after reboot I tried to "recover" but no-go, so just turned off flashed tinycore-redpill-uefi.v0.9.4.9.img into usb drive generated user_config.json, edited to put real mac and old SN, then built DS3622xs+ platform Then I booted from USB drive but got bootloop. So I decided to try m-shell. I downloded it from github and performed simple cmd: my.sh DS3622xs+ noconfig Everything went fine, got new grub boot option (TCRP Friend) and I booted. Still bootloop. I can see booting messages like on screen, there is "HTTP Synology Web Assistant (BusyBox httpd)" service may take 20-40 seconds. (Network access is not immediately available). Kernel loading has started, nothing will be displayed here anymore" on screen, then after 2-3 seconds my machine just reboots. Does it look like a kernel panic? How to debug it, how to know what's going on?
  4. I'm running 7.1-42661 on loader v0.8 and I'd like to upgrade to latest 7.1.1-429xx and tcrp v0.9.4. So quick question - should I go with full guide (all steps) or only somehow "upgrade" from existing USB pendrive?
  5. - Outcome of the update: SUCCESSFUL - DSM version prior update: v6.2.3.3_25426 - DS918+ - Loader version and model: TinyCore 0.8.0 - DS3622xs+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - old terminal Fujitsu Futro S720 with AMD GX-217GA + 4GB RAM + ASM1061 PCIe to SATA 3.0 adapter. - Additional comments: Migration in two steps - first to 7.0.1 and to 7.1 then.
  6. I only want to omit swap usage on slow hdd (/dev/md1), no space reclamation. I can easily disable it manually (swapoff as root) but how to prevent DSM from use it again after reboot?
  7. Is there possibility to disable disk swap? I'd like to have only compressed ram swap, not disk-based swap.
  8. I did some more tests and you're right - it's not case sensitive, it's all about USB port used. I have to put usb drive into USB 3.0 front port to make it fully working. Thank you. Sorry for not reading FAQ, I missed it somehow starting with reading tutorials section carefully. Now I know XPE better I'm gonna try to migrate my raid drives into XPE - after backing up - and let's see if it's possible
  9. My box is Futro S720 (AMD GX-217GA), has 16GB SSD intended for OS only.I'd like to migrate 2x1TB HDD from old nas without data loss. They work in RAID 1 using mdadm. I've managed to install XPE platform DS918+ using bootloader 1.04b and DSM_DS918+_25426.pat file It wasn't successful at few first tries because I put PID, VID, MAC using lower cases! I thought it's case insensitive, but it is - so always put pid, vid, mac, etc in upper case! USB drive is for bootloader only? Whole system is loaded from HDD/SSD? So is it possible to move bootloader into HDD/SSD to get rid of USB drive? Is it possible to migrate 2x1TB HDD from old NAS and run them using mdadm RAID1? I'd like them to be my primary storage in XPE (still in RAID1). Can I use unused space from my 16GB SSD (with system) as storage/pool somehow?
  10. I'm trying to install XPE to Futro S720 (AMD GX-217GA), just started with bootloader 1.04b and DS918+ platform (and v6.2.3 PAT). So questions (that I cannot find answer for): Is USB drive for initial bootstrap & installation? Can I remove after all and it's not needed anymore? Because I'd like to install & run on dedicated 16GB SATA SSD. Booting from usb drive stops at "screen will stop updating..." and there is no further messages. Does it mean that bootloader doesn't work for me? Should I try with v1.03 DS3515/17 I suppose?
×
×
  • Create New...