Jump to content
XPEnology Community

Pantigon

Rookie
  • Posts

    8
  • Joined

  • Last visited

Everything posted by Pantigon

  1. "There is a hard lock on the tasks you can run with any GPU" - How to activate it?
  2. Here is the configuration on ESXi 7.0 U2 Boot ok, but not getting IP.... P/s: Same settings, I run it on ESXi 6.7 server, it works 😀
  3. you are booting DS3617 as virtual USB synoboot.vmdk or sata synoboot.vmdk? Of course I fixed the card's MAC. I booting DS3167 as sata synoboot.vmdk is ok but virtual USB synoboot.vmdk isn't IP received. And of course my ESXi 6.7 and ESXi 7 on 2 different physical servers.
  4. I using e1000e. But it doesn't seem to get the IP. But with your instructions, I run on ESXi 6.7 and it's ok
  5. @Marawan I used his mod loader file HERE. The problem is that I boot ok but XPEN doesn't seem to get the IP when installing on ESXi 7, but ESXi 6.7 is ok. Are you running it on ESXi 7?
  6. # VMware virtual USB mass storage set vid=0x0e0f set pid=0x0005 May I ask how to get this parameter? i think the vid and pid parameters have been changed on ESXi 7.0 so i can't use the loder file you created. Here is the content of the file .vmx .encoding = "UTF-8" config.version = "8" virtualHW.version = "14" nvram = "XPEnology918.nvram" pciBridge0.present = "TRUE" svga.present = "TRUE" pciBridge4.present = "TRUE" pciBridge4.virtualDev = "pcieRootPort" pciBridge4.functions = "8" pciBridge5.present = "TRUE" pciBridge5.virtualDev = "pcieRootPort" pciBridge5.functions = "8" pciBridge6.present = "TRUE" pciBridge6.virtualDev = "pcieRootPort" pciBridge6.functions = "8" pciBridge7.present = "TRUE" pciBridge7.virtualDev = "pcieRootPort" pciBridge7.functions = "8" vmci0.present = "TRUE" hpet0.present = "TRUE" floppy0.present = "FALSE" RemoteDisplay.maxConnections = "-1" numvcpus = "4" memSize = "4096" bios.bootRetry.delay = "10" firmware = "efi" powerType.powerOff = "default" powerType.suspend = "soft" powerType.reset = "default" tools.upgrade.policy = "manual" sched.cpu.units = "mhz" sched.cpu.affinity = "all" sched.cpu.latencySensitivity = "normal" vm.createDate = "1628805320629596" sata0.present = "TRUE" usb.present = "TRUE" ehci.present = "TRUE" usb_xhci.present = "TRUE" svga.autodetect = "TRUE" serial0.fileType = "file" serial0.fileName = "serial.out" serial0.yieldOnMsrRead = "TRUE" serial0.present = "TRUE" sata0:1.fileName = "XPEnology918.vmdk" sched.sata0:1.shares = "normal" sched.sata0:1.throughputCap = "off" sata0:1.present = "TRUE" ethernet0.virtualDev = "e1000e" ethernet0.networkName = "VM Network" ethernet0.addressType = "static" ethernet0.address = "00:11:32:12:34:56" ethernet0.wakeOnPcktRcv = "FALSE" ethernet0.present = "TRUE" displayName = "XPEnology918" guestOS = "other4xlinux-64" bios.forceSetupOnce = "TRUE" toolScripts.afterPowerOn = "TRUE" toolScripts.afterResume = "TRUE" toolScripts.beforeSuspend = "TRUE" toolScripts.beforePowerOff = "TRUE" tools.syncTime = "FALSE" uuid.bios = "56 4d 3b af 2c 82 0a 64-b0 ed 5e 70 14 f4 99 39" uuid.location = "56 4d 3b af 2c 82 0a 64-b0 ed 5e 70 14 f4 99 39" vc.uuid = "52 21 7d 5a 86 30 d7 c8-a0 ec 4b ee 8b b9 93 dc" sched.cpu.min = "0" sched.cpu.shares = "normal" sched.mem.min = "0" sched.mem.minSize = "0" sched.mem.shares = "normal" usb_xhci:3.present = "TRUE" usb_xhci:3.deviceType = "disk" usb_xhci:3.fileName = "synoboot.vmdk" usb_xhci:3.readonly = "FALSE"
×
×
  • Create New...