Spats
-
Posts
87 -
Joined
-
Last visited
Posts posted by Spats
-
-
Any knows a workaround for 0365.....See above...
Cheers
Is there root access to delete O365 from DSM, then reinstall it with the same code, to activate it.
-
Guys,
Any workaround for this....
how to setup a different user and password (temp) , and how would i set this up. the other ones are working its only O365, I get the error...see above.
cheers
-
-
This is so frustrating....
success true
{"success":true}
Task creation wizard, certificate password i create a password.
then it gives me a popup Sign in to your account (microsoftonline.com).
I try to sign in then it says, You can't sign in here with a personal account. Use your work or school account instead.
DS918+ (Genuine)
DSM 7.2.1-69057 update 4
Anyone have any ideas
Thanks to alxr0101 for using the the links page.
I dont know what is happening using chrome incognito mode.
--------------------------------------------------------------------------------------
EDIT
so i decided to try , i installed back up for business, with the same setup using alxr0101 page
and i got this got this {"data":{"activated":true},"success":true}
possibly its not going to work with 365...
-
HI,
I do have a genuine serial number, DS918+.
I setup MS 365 and logged in with that, i cannot create anything, as it asks for a works account for MS.
So i tried the steps above but keep getting {
"error": {
"code": 400
},
"success": false
}Any workaround for this.
Cheers guys / gals
-
Just now, Spats said:
Got it mate, Thanks, using the M-Shell.
much appreciated.
I don't think i will update now as i don't want to go through this again.
-
Got it mate, using the M-Shell.
much appreciated.
I don't think i will update now as i don't want to go through this again.
-
-
Updating dsm to 721-6907 update 4, it says not installed, now its asking for .Pat file gets to 41% then stops.
DS918+ was working with 7.1.1 how to rollback guys
dont want to lose anything on my hdds
TCRP FRIEND VERSION 0.0.6
-
On 8/1/2022 at 11:31 PM, cabldevil said:
I was wanted to know if anyone has a 10G card working with DSM 7 using the 918+ profile?
If so what card, and thank you.
CD
Yes, got the Intel X250-DA2 SFP+ with Dac ( Direct Attached Cable) working great with the DS918+ 7.1.
If you have or want to setup DS918+ you will have to change Maxlanport in etc/synoninfo.conf and etc.defaults/synoinfo.conf as the DS918+ only comes with two ports active by default, hence the reason to change the Maxlanport to get the card working.
Also you can add the macs of the card in the the Grub.cfg
Hope this helps
-
Anyone guys.....
-
1 hour ago, Orphée said:
It is in french, but quite easy to understand/translate.
Thanks @Orphée I dont have space in my pc, for a card but i am connected via <ip>:7681.
So what commands do i need please, thanks
-
Thanks @phone guy
I thought that but how to give serial logs, running BareMetal but don't have means to give serial output tho.
-
@Orphée I don't understand bud, your quote Serial logs, or it did not happen. Unquote
Please explain
cheers
-
19 minutes ago, pocopico said:
OK i see the problem .. please change your BIOS disk settings to SATA AHCI if thats possible. IDE is not supported.
Thanks mate, changed all settings to AHCI that works ok, now i have another problem is that it "fails to install file. The file is probably corrupted" @57%.
Dowloaded .Pat file from syno itself.
Any ideas as to why this is happening?.
Cheers
-
1 minute ago, pocopico said:
What is the issue ?
Sorry for got to add "No drives detected in DVA1622"
-
16 hours ago, dimakv2014 said:
Try without ./rploader.sh satamap, dva1622 doesnt have satamap
Thanks bud,
./rploader.sh update
./rploader.sh fullupgrade
./rploader.sh identifyusb
./rploader.sh serialgen DVA1622
./rploader.sh build dva1622-7.1.0-42661
still same outcome with with satamap ommited
"NO drives detected in DVA1622"
Anyone any ideas as to why this is happening.
cheers
Attached TCRP build txt.
-
Guys,
Have a Lenovo T430 laptop
Intel i5-3320m CPU @2.60GHz
4 GB RAM
I have done these commands
./rploader.sh update
./rploader.sh fullupgrade
./rploader.sh identifyusb
./rploader.sh satamap
./rploader.sh serialgen DVA1622
./rploader.sh build dva1622-7.1.0-42661
I get an ip but "NO drives detected in DVA1622"
Anyone any ideas, I have attached the TCRP Build
cheers
-
Sorted, SAS Controller was Disabled.
-
2 x Intel Xeon L5630@2.13Ghz
24Gb DDR3 ECC memory
Dell Perc 200I flashed to IT mode
4 QLOGIC BCM5709C onboard
INTEL PRO 1000 2 port 1 gb cardHad this working great in this server, turned it off for a week, switched it back on would not boot.
I took out my 2 2tb iron wolves hdd's deleted partitions put them back in built a new image with same 4 gb flash drive.
no drives detected when i build same image on same flash drive.
Nothing has been done to system no changes etc.
I swapped out the hdd's for a 320gb hdd still no hdd being detected.
any ideas what could be wrong.
TIA Guys
-
17 minutes ago, pocopico said:
could it be that you have not download the advanced media extensions package ?
Got it installed mate, HEVC and AAC V 1.0.0-5001
status up to date.
cheers
- 1
-
-
Anyone know why i cannot get cat: /usr/syno/etc/codec/activation.conf: No such file or directory
yet i can get
:/dev/dri# dir
total 0
drwxr-xr-x 2 root root 80 Jul 12 21:07 .
drwxr-xr-x 12 root root 13780 Jul 12 21:08 ..
crw------- 1 root root 226, 0 Jul 12 21:07 card0
crw-rw---- 1 root videodriver 226, 128 Jul 12 21:07 renderD128real mac and serial on baremetal.
Videostation works with 4k so does plex but cpu is about 80-90% usage.
need guidance guys
cheers
-
@rojoone2 finally got DS3622xs+ working on R710 mate, cheers for your help.
- 1
The New Active Backup
in Synology Packages
Posted
Guys, does anyone have an idea of a workaround for O365....
Its doing my head in, not knowing what to delete in root of the nas..
So i can activate O365.
Cheers