rom70

Hello ! Thanks a lot ! yes, I may have change my sataportmap after, but same problem. Ok, I will let the default value for now on. You're right this is exactly the reference I have ! Ok, in that case I will buy an otherone as you say. Ok for the 12disks max, I will look into that before upgrading again, but it will maybe be 2 NAS of 8 disks each. Thanks again for all the informations.

Hello, I come to you because I want to upgrade my NAS. I had a 4 disks NAS and I now want to go up to 9 disks (8HDD + 1 SSD) today and maybe 17 disks later (4*4RAID5 + SSD). I have a problem with my Asmedia 1061 PCI card who have 4 SATA port. DSM take 15 to 20mins to boot and It found only 1 HDD on the ASmedia card. I checked on a linux live, and it found all my drives. I then export a "dmesg" who show me the booting log (cf. attached document) and it seemes that dsm got that error : [ 5.194155] ata7.00: failed to read SCR 0 (Emask=0x40) then it tries multiples times and can't get further and finaly give up. It find then the disk 8 (who it's the 1 disk from the PCI card visible in DSM) on no sign of the other 2 disks. For information, my SataPortMap is 4444. I tried multiple solutions as I have at least 3 sata controlers (at least 2 on the motherboard + 1 PCI) but it change nothing. My motherboard is a Asus P5B with a 5th SATA port (originaly for RAID ans now use for SSD) I have 4GB of DDR2 533MHz 4 disks WD 1To on the motherboard 1 SSD on the raid port of the motherboard 4 disks seagate 1To on the PCI card (Everything is from recycling old PCs.) Does anywhone know anything about theses types of error ? Thanks in advance ! log boot dsm.txt