pistachio

Appreciate the clarification. Case closed, thanks for your help!

Thank you! Good to know it's purely graphical. I was worried it was indicative of some misconfiguration which might affect other things like which drives the DSM partitions were installed, or if the missing drives were treated as USB etc. Is there a writeup anywhere how it is configured though? I understand the use of hex/bin but all I found so far are random examples of how people have fixed their config (albeit trial & error) but can't find a proper writeup or description anywhere.

@gadreel Thanks for the reassurance! I'm guessing there's no fix for it as of now.

Assistance needed please, and thanks! I upgraded from Jun 6.xx loader to Redpill 7.1 using https://xpenology.com/forum/topic/62221-tutorial-installmigrate-to-dsm-7x-with-tinycore-redpill-tcrp-loader/ Good news, when I boot up, I can all 5 drives are listed Bad news: The "drive information" only shows 4 ports (and 2 drives filled). See attached. Is this something I should be concerned about? How can I fix this? My hardware: Asrock J4105 mobo + IOCREST SI-PEX40064 (MARVELL 88SE9215) 4 port SATA 6G PCI Express card Drives: 5 drives of 8 filled

I think it has something to do with: "synoinfo": { "internalportcfg": "0xffff", But not sure what/how to change it. edit: Digging further, ffff = 1111111111111111, so 16 internal drives, which matches to the maxdrives=16. I'm still not sure why it only presents 4 drives in the display. Any ideas?

I've a ASROCK J4105 mobo with 4 sata ports and additional Marvel 4 Sata port PCI-E card. TRCP automatically detected and setup the following, which appears to be correct: All 5 inserted disks work perfectly in 7.1 but the "Drive Information" diagram only shows 4 available drives *see screenshot below*. How do I fix this?