Jump to content
XPEnology Community

SomeTester

Member
  • Posts

    54
  • Joined

  • Last visited

Everything posted by SomeTester

  1. Just to make sure that I understand, you mean recording and playback, right? If so, then yes!
  2. Sorry, I should have updated this thread. It works perfectly fine on my AMD CPU-based server.
  3. Просто хотел убедиться, нельзя ли включить мобильные push-уведомления? Когда я пытаюсь включить его, я получаю сообщение «Операция не удалась».
  4. Update: We're in business. It had to of been the SMT piece messing with everything (though the Intel NIC E1000 probably didn't hurt, as well as reformatting both drives). Pretty sure I am in a good place now. Thank you both very much, and I hope that this thread helps someone else out in the future!
  5. Well, SMT is a helluva drug. I made a lot of progress after that, and that seemed to do the trick. Much appreciated! I got it to come back post reboot with DS3617xs, but it asks me for a password. Tried it with admin/[blank] but no dice. Either way, I'll reformat and try again and report back.
  6. Hyper Threading (HT) is for Intel only, so not applicable here. I don't know what core-timings are, that's not a thing. Does he mean c-state...? I'm not sure how that would help. I still have the same issue with the Jun Loaders with the NIC Intel card, very disappointed.
  7. At least with Peter's IMGs, formatting the drives made no difference. Also, the Ethernet port is blinking amber with solid green as well, but my bet is still the NIC as well. I'll report back after the new NIC arrives (and I'll disable the other in the BIOS).
  8. I should be getting a Intel Gigabit CT PCI-E Network Adapter EXPI9301CTBLK (with the E1000 chipset 82574L). We will see if that does the trick. In the meantime, I will work on your suggestions to see if they make any difference, dumb or not
  9. Appreciate the troubleshooting tips. Quick question before I try something else as well: does it matter if I currently have DSM 7.1 on my HDD? I might just wipe them entirely as well and try what you suggested.
  10. I did not, I burned your IMG that you provided to me onto the USB and only edited the grub.conf as required. Sorry if I was not clear before with the steps that I went through. Let me know if I made any mistake.
  11. It's an idea I've been bouncing around for sure. If there was a known-NIC adapter that everyone recognizes as working, I would be more than happy to purchase it. Do you have any suggestions?
  12. Fair, and yeah, I always ping/access port 5000 directly instead. I'm just not sure what's going on for me. I updated the 4 fields in partition 1 (used serial generator for the appropriate DS), wrote it to the USB with Win32DiskImager, booted the USB, waited, nothing. Is there any particular step that I may be missing here?
  13. Thank you! Yeah, let me know if you can get anything to appear on your end when trying a 6.2 DSM of sorts. Looking forward to hearing your findings. It's odd though how the only one that has worked for me was the TCRP for DS1621+. And you're right, same Realtek Ethernet driver. Keep me posted!
  14. Hey @Peter Suh, no luck for either. After booting up and using find.synology.com or directly navigating to the IP and port 5000, it cannot reach the destination, nor is it pingable. The find web app "identifies" that there is a host to connect to, but nothing else. Though it currently has DSM 7 on it (whe I finally got the one Ryzen noted one to work, V1000, which isn't good for me). In either case, what happened here has been consistent since the beginning of this thread. For what it's worth: CPU: AMD Ryzen 5 5600G 6-Core 12-Thread Unlocked Desktop Processor with Radeon Graphics Motherboard: ASUS Prime B450M-A II AMD AM4 (Ryzen 5000, 3rd/2nd/1st Gen Ryzen Micro ATX Motherboard (128GB DDR4, 4400 O.C.), NVMe, HDMI 2.0b/DVI/D-Sub, USB 3.2 Gen 2, BIOS Flashback, and Aura Sync) Driver-wise, it is the BM450 chipset as far as I can tell. This is a super simple setup, and I can't figure out why I'm having so much trouble with it. Any other thoughts?
  15. Just tried out the first IMG. Updated the contents of grub.conf, and it is not pingable post boot. I tried both fresh install and reinstall options. I'll try the second IMG here shortly.
  16. Yes sir! I simultaneously was doing that now. I'm just hedging my bets haha.
  17. I followed the latter half of this post before with no such luck. But at the same time, it was kind of confusing. For DS3615xs, should I load up the extra.lzma as well as the zImage and rd.gz into the second partition? I guess following "Case 2" should be my path, right?
  18. That's correct, no HBA and I am plugged in directly to the onboard SATA ports. Unless if I am mistaken though, I thought that I tried the latest Jun loaders. In either case, I will try once more via the Jun loader way and update the first partition with the USB items, correct serial, and MAC address. If this doesn't work, I am pretty stumped.
  19. Well, I do want to get this working with the older DS versions and with DSM 6.2. What suggestions do you have as to why most of the time with TCRP I simply cannot ping the host after boot? I'm just simply stuck on that front. Or, when using the Jun Loader, I can perform the migration, but it doesn't come back after rebooting and finishing the migration.
  20. Эй @montagnic, это было давно! Надеюсь все хорошо. Рад видеть вас еще в этой теме. Недавно я обновил свой сервер и по какой-то странной причине не могу загрузиться ни с одним загрузчиком, поддерживающим DSM 6.X. Итак, я застрял на 7.1. Я хотел попробовать DVA3221 с TCRP, но я хотел убедиться, что нет никаких требований, о которых я не знаю. У меня процессор AMD Ryzen и материнская плата BM450. Должен ли работать DVA3221 и получу ли я автоматически лицензии на 8 камер? Извините, если это было сказано ранее, но мне очень сложно искать на русском языке.
  21. Hey @Peter Suh, appreciate you sharing that script. Would it be possible to alter that bash file easily enough to specify a different *.pat file, such as DSM 6.2 with DS3615xs? Also, I unfortunately had the same outcome post install where the server is not pingable nor loads the webpage. The TCRP bit without Internet connectivity was a mess up on my side, but with TCRP, the only one I've gotten to work has been DS1621+ with V1000. However, I wanted to stick with the older DS with DSM 6.2 if possible.
  22. I think that it was due to the DSM version I was using. It worked right out the gate with DS1621+. I see a note there about AMD Ryzen (which is my CPU), but the note eludes to a comment about SATA drives. Not sure if that's related at all to it not appearing/booting up with any of the other DSM versions. Given that it worked with this one, would you come to the same conclusion? I just did an automated install and none of the optional steps this round.
  23. Similar issue as I had with the Jun Loader: the system is detected by find.synology.com, but the host itself is not pingable/can't access port 5000 or anything else. When building it, I went with apollolake and let it find drivers via the ext function. It found drivers automatically for the Ethernet chipset, but I guess it still failed. Thoughts? Details: RedPill DS918+ v7.1.0-42661 It looks that you will need the following modules : Found SATA Controller : pciid 1022d000043c8 Required Extension : No matching extension [#] Checking runtime for required tools... [OK] [#] Adding new extension from https://raw.githubusercontent.com/pocopico/rp-ext/master/r8169/rpext-index.json... [#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/r8169/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json ######################################################################## 100.0% [OK] [#] ========================================== pocopico.r8169 ========================================== [#] Extension name: r8169 [#] Description: Adds RealTek RTL-8169 Gigabit Ethernet driver Support [#] To get help visit: <todo> [#] Extension preparer/packer: https://github.com/pocopico/rp-ext/tree/main/r8169 [#] Software author: https://github.com/pocopico [#] Update URL: https://raw.githubusercontent.com/pocopico/rp-ext/master/r8169/rpext-index.json [#] Platforms supported: ds1621p_42218 ds1621p_42951 ds918p_41890 dva3221_42661 ds3617xs_42621 ds3617xs_42218 ds920p_42661 dva3221_42962 ds918p_42661 ds3622xsp_42962 ds3617xs_42951 dva1622_42218 dva1622_42621 ds920p_42962 ds1621p_42661 dva1622_42951 ds918p_25556 dva3221_42218 ds3615xs_42661 dva3221_42951 ds3622xsp_42661 ds3622xsp_42218 ds2422p_42962 dva1622_42962 ds2422p_42218 dva3221_42621 ds3615xs_42962 ds3617xs_42962 ds3615xs_41222 ds920p_42951 ds2422p_42951 ds918p_42621 ds3617xs_42661 ds3615xs_25556 ds920p_42218 ds920p_42621 ds918p_42962 ds3615xs_42951 ds3622xsp_42951 dva1622_42661 ds918p_42218 ds2422p_42621 ds1621p_42621 ds3615xs_42621 ds3615xs_42218 ds1621p_42962 ds3622xsp_42621 [#] ======================================================================================= Found Ethernet Interface : pciid 10ecd00008168 Required Extension : r8169 Searching for matching extension for r8169 Found matching extension : "https://raw.githubusercontent.com/pocopico/rp-ext/master/r8169/rpext-index.json" Found VGA Controller : pciid 1002d00001638 Required Extension : No matching extension Found SATA Controller : pciid 1022d00007901 Required Extension : No matching extension
  24. Appreciate the replies. I am trying TCRP now as a fresh install, and am presented with the following: tc@box:~$ ./rploader.sh satamap Found "01:00.1 Advanced Micro Devices, Inc. [AMD] Device 43c8 (rev 01)" Detected 8 ports/2 drives. Bad ports: 3 4 7 8. Override # of ports or ENTER to accept <8> Found "09:00.0 Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] (rev 81)" Detected 1 ports/0 drives. Override # of ports or ENTER to accept <1> Computed settings: SataPortMap=81 DiskIdxMap=0008 WARNING: Bad ports are mapped. The DSM installation will fail! This representation of data is not very intuitive. If I am understanding this correctly, I would want to override ports 3, 4, 7, and 8. I assume that my two drives are physically mapped to ports 1 and 2. For the two questions, I am not sure what sort of response it is expecting for each. Thoughts?
×
×
  • Create New...