SomeTester

No problem, and good luck!

Just to make sure that I understand, you mean recording and playback, right? If so, then yes!

Sorry, I should have updated this thread. It works perfectly fine on my AMD CPU-based server.

Просто хотел убедиться, нельзя ли включить мобильные push-уведомления? Когда я пытаюсь включить его, я получаю сообщение «Операция не удалась».

Update: We're in business. It had to of been the SMT piece messing with everything (though the Intel NIC E1000 probably didn't hurt, as well as reformatting both drives). Pretty sure I am in a good place now. Thank you both very much, and I hope that this thread helps someone else out in the future!

Well, SMT is a helluva drug. I made a lot of progress after that, and that seemed to do the trick. Much appreciated! I got it to come back post reboot with DS3617xs, but it asks me for a password. Tried it with admin/[blank] but no dice. Either way, I'll reformat and try again and report back.

Hyper Threading (HT) is for Intel only, so not applicable here. I don't know what core-timings are, that's not a thing. Does he mean c-state...? I'm not sure how that would help. I still have the same issue with the Jun Loaders with the NIC Intel card, very disappointed.

At least with Peter's IMGs, formatting the drives made no difference. Also, the Ethernet port is blinking amber with solid green as well, but my bet is still the NIC as well. I'll report back after the new NIC arrives (and I'll disable the other in the BIOS).

I should be getting a Intel Gigabit CT PCI-E Network Adapter EXPI9301CTBLK (with the E1000 chipset 82574L). We will see if that does the trick. In the meantime, I will work on your suggestions to see if they make any difference, dumb or not

Appreciate the troubleshooting tips. Quick question before I try something else as well: does it matter if I currently have DSM 7.1 on my HDD? I might just wipe them entirely as well and try what you suggested.

I did not, I burned your IMG that you provided to me onto the USB and only edited the grub.conf as required. Sorry if I was not clear before with the steps that I went through. Let me know if I made any mistake.

It's an idea I've been bouncing around for sure. If there was a known-NIC adapter that everyone recognizes as working, I would be more than happy to purchase it. Do you have any suggestions?

Fair, and yeah, I always ping/access port 5000 directly instead. I'm just not sure what's going on for me. I updated the 4 fields in partition 1 (used serial generator for the appropriate DS), wrote it to the USB with Win32DiskImager, booted the USB, waited, nothing. Is there any particular step that I may be missing here?

Thank you! Yeah, let me know if you can get anything to appear on your end when trying a 6.2 DSM of sorts. Looking forward to hearing your findings. It's odd though how the only one that has worked for me was the TCRP for DS1621+. And you're right, same Realtek Ethernet driver. Keep me posted!

Hey @Peter Suh, no luck for either. After booting up and using find.synology.com or directly navigating to the IP and port 5000, it cannot reach the destination, nor is it pingable. The find web app "identifies" that there is a host to connect to, but nothing else. Though it currently has DSM 7 on it (whe I finally got the one Ryzen noted one to work, V1000, which isn't good for me). In either case, what happened here has been consistent since the beginning of this thread. For what it's worth: CPU: AMD Ryzen 5 5600G 6-Core 12-Thread Unlocked Desktop Processor with Radeon Graphics Motherboard: ASUS Prime B450M-A II AMD AM4 (Ryzen 5000, 3rd/2nd/1st Gen Ryzen Micro ATX Motherboard (128GB DDR4, 4400 O.C.), NVMe, HDMI 2.0b/DVI/D-Sub, USB 3.2 Gen 2, BIOS Flashback, and Aura Sync) Driver-wise, it is the BM450 chipset as far as I can tell. This is a super simple setup, and I can't figure out why I'm having so much trouble with it. Any other thoughts?