francewavidok

Using the DS3615xs platform btw

wouldn't the 1060 help at all with running plex? I installed 6.2.3 correctly but it doesn't seem to work. When I boot it, I can't find it at all and on the screen of the device I just get a cursor flashing with nothing else happening.

Also a 1060

Sorry I'll clarify - here's what I've done. 1. Tried to simply install it for the very first time. Used 1.03 and used 6.2.3 when synology was found then the 10 minute timer ran out and couldn't find anything 2. Tried to restart it and boot into reinstall mode using the 1.03 usb and nothing worked 3. Reformatted the USB and reinstalled 1.03 with the correct PID and VID etc... 4. Plugged it in again and booted via USB and when I click on the install or reinstall - I just get a frozen screen with nothing I am thinking it's installed something locally on my machine and I might need to format the drives or something? Can I install 6.2.2 straight away or do I have to install 6.2 and upgrade? Hardware is: - NIC: The NC110T is based on the Intel 82572GI controller - Mobo: Asus prime h370m Plus - i5 9400f - HDD: SSD and 5 HDD's Anything else I need to list?

Yep formatted the whole stick and started again from scratch. Still nothing.

So I basically tried to install 6.2.2 which was going fine. Here's where I believe I stuffed up. The install went fine, I found the device and went through the process of manually giving it the PAT file. Unfortunately I believe I provided the wrong pat file. 6.2.3 and once the 10 minute counter was over - it did nothing. So I thought, hey why don't i just start all over again. I booted off my 1.03 USB and went to Jun's installer and as soon as I load it up - it freezes. Typically the underline would still flash at the bottom - now nothing. No idea what to do here. When I boot into normal mode without a USB in there - I just get a blank screen with an underscore. I can't see anything on the router either... Help