oliphaunt182

Thanks fly, I tried for a couple more hours playing bios settings to see if I could get the 1.03b loader to work to no avail. As soon as I flashed the usb to 1.02b everything worked right away and fine. I'm going to chalk this up to some old hardware and when support for things I use runs out this time I guess it will be time for a new build. thanks again!

Hey everyone, First a little background, I've had a build running DSM 5.0 for years working great however the primary use of it Plex no longer can be upgraded so I've ventured down the path to upgrade. I'm attempting to do a fresh install on this same hardware. I am trying to install DSM 6.2.3 for a 3615xs (or 3617xs) using jun 1.03b. Motherboard: Gigabyte GA-H97N-WIFI Mini ITX CPU: Intel Core i3-4150 I've down a lot of searching and taken a lot of steps but at this time I get to the "Screen will stop updating shortly" and then I can't find the server from there using either the find.synology or the synology assistant or going straight to the address that is assigned to the mac address of the nic. Alright so steps I've done: After a full back up, I booted to an ubuntu livecd and ran dd on all drives to wipe them out. Check fdisk when done and all data appears to be wiped. Followed the tutoral steps for a 3615xs (also tried 3617xs). Triple checked the pid and vid which are good.SN generated and Mac address into the grub file. Wrote to the updates to the usb drive and transferred it into the build and get stuck at the "Screen will stop updating shortly". Cannot find the nas on either the find.synology or assistant software. I should mention here this where I followed instructions about 3 more times for 3615 and another 2 times trying 3617. At this point I did a little more researching so I decided to download IG-88s extra drivers to see if that was the problem. I found the jun 1.03b and DSM 6.2.3 for 3615xs/3617xs extra.lzma. I dropped those into the 2nd partition overwriting the extra.lmza that was already there. I tried to start it up with this same problem. At this point I did even more reading, and found the part in the IG-88s 6.2.2 post where it states to download the pat file and extract the zimage and rd.gz files and drop those into the 2nd partition. I started it after this and same problem. So I'm sort of at loss, I tried doing my best to check manual drivers but it looks like intel nic drivers are in there as well as the qualcom drivers. Any help would be appreciated. Thanks.