Jump to content
XPEnology Community

Crazor

Rookie
  • Posts

    3
  • Joined

  • Last visited

Everything posted by Crazor

  1. Since you mentioned EFI, I went through the BIOS again and disabled the CSM et voilà, DiskStation found!
  2. There's actually four ports on the back. I assumed that the mainboard would contain a switch, since those ports appear to be active with the NAS powered off but the power supply still connected... I re-checked with 1.04b and tried all four ports, but nothing. Or do I have to boot with the cable in each of the ports? Of course, I also checked the router every time. No lease...
  3. I'm trying to install DSM6.2.2/.3 on a TerraMaster F2-421. However, the kernel does not even seem to start (No output after "Screen will stop updating shortly"). I tried jun's v1.04b and v1.03b. Here's some hardware info: processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 92 model name : Intel(R) Celeron(R) CPU J3455 @ 1.50GHz stepping : 9 microcode : 0x1c cpu MHz : 1497.599 cache size : 1024 KB physical id : 0 siblings : 4 core id : 0 cpu cores : 4 apicid : 0 initial apicid : 0 fpu : yes fpu_exception : yes cpuid level : 21 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology tsc_reliable nonstop_tsc cpuid aperfmperf tsc_known_freq pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 sdbg cx16 xtpr pdcm sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave rdrand lahf_lm 3dnowprefetch cpuid_fault cat_l2 intel_pt tpr_shadow vnmi flexpriority ept vpid fsgsbase tsc_adjust smep erms mpx rdt_a rdseed smap clflushopt sha_ni xsaveopt xsavec xgetbv1 xsaves dtherm ida arat pln pts bugs : monitor bogomips : 2995.20 clflush size : 64 cache_alignment : 64 address sizes : 39 bits physical, 48 bits virtual power management: [omitted the other 3 cores] 00:00.0 Host bridge: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series Host Bridge (rev 0b) 00:02.0 VGA compatible controller: Intel Corporation HD Graphics 500 (rev 0b) 00:0f.0 Communication controller: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series Trusted Execution Engine (rev 0b) 00:12.0 SATA controller: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series SATA AHCI Controller (rev 0b) 00:13.0 PCI bridge: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series PCI Express Port A #1 (rev fb) 00:13.1 PCI bridge: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series PCI Express Port A #2 (rev fb) 00:14.0 PCI bridge: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series PCI Express Port B #1 (rev fb) 00:15.0 USB controller: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series USB xHCI (rev 0b) 00:1e.0 SD Host controller: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series SDIO Controller (rev 0b) 00:1f.0 ISA bridge: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series Low Pin Count Interface (rev 0b) 00:1f.1 SMBus: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series SMBus Controller (rev 0b) 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 07) 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 07) I don't think I can access the serial port with this system. I'm looking at the HDMI output and I only see grub and the mentioned message.
×
×
  • Create New...