-
Posts
9 -
Joined
-
Last visited
Posts posted by Ermite
-
-
On 9/17/2021 at 11:20 AM, kaykkay said:
Hi, Would like to know how did you build the bootloader?
I tried both redpill-tool-chain_x86_64_v0.8 and redpill-tool-chain_x86_64_v0.7.4, both of them are not working.
I just followed README.md,
there is any modificationI didn't any modification except SerialNumber, USB PID/VID, MACADDR on bromolow_user_config.json .
If you no have any Intel NICs on your N54L, additional driver (eg. tg3.ko) needed.
Basically DSM does not support (exactly not included) Broadcom NetXtreme.
But I don't know how add additional driver to boot image, so I added Intel NICs to my N54L. -
51 minutes ago, WiteWulf said:
The blank “General” screen in Control Panel is a known bug in the Synology software, I believe.
Not sure what the problem is with the UPS, though.
-Is DSM seeing the UPS there at all?Sorry, was posting from my phone earlier and couldn't see the screenshot you'd posted clearly, "No USB UPS connected"- Is it listed by Synology as a supported device in 7.x?
- Can you see it if you run ‘lsusb’ from the cli?
- Have a look at the console output and see what’s happening when you connect the UPS to the server. Any obvious errors?
Oh. 3615xs not listed in my UPS support List (https://www.synology.com/en-global/compatibility?search_by=category&category=upses&filter_brand=APC&p=1&change_log_p=1)
But it is weird. Why this UPS can work with 3615xs in DSM 6.2.3?
When I return home, take a log(dmesg, lsusb) when UPS disconnected and connected. -
Installed bromolow-7.0.1-42214 to my HP N54L.
I was used Jun's Loader 1.03b (DSM 6.2.3) and all HDD fully migrated with no error. (only keep my data, drop before config)
and it work well, but some part is not work.
1. Info Center - General tab is blank.
2. USB UPS cannot work. I'm using APC UPS, it worked with 6.2.3.
-
2 minutes ago, scoobdriver said:
it actually works with the Broadcom nic without extra.lzmaOh, there is something changed? Or some work needed? When I apply Jun's Loader 1.03b/DSM 6.2.3 on my N54L with default NIC, it doesn't work.
-
At default, Jun''s 1.03b doesn't have Broadcom NIC driver. -> It can find by Synology Assistant at first, later your N54L never response.
If you want use default NIC, may need extra.lzma which contain Broadcom NIC driver.
No want use extra.lzma, buy Intel PCIe Gigabit NIC and install on N54L, and in BIOS you must disable Internal NIC. -
Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 6.2.3-25426
- Loader version and model: JUN'S LOADER v1.03b - DS3615xs
- Using custom extra.lzma: NO
- Installation type: BAREMETAL - HP N54L, Intel 82576 Dual RJ45 PCIe 2.0 x1, Enermax 2.5" x1, 3.5" x1 HDD Bay, PM-MSATA22GT-R (mSATA x2, SATA Gen3 x2) PCIe SATA Expansion Card
- Additional comments: Update with DSM GUI to DSM 6.2.3-25426 Update 2 : All is work.
-
https://www.synology.com/en-global/releaseNote/DS3615xs
SpoilerVersion: 6.2.3-25426-2
(2020-07-16)
Important NoteYour Synology NAS may not notify you of this DSM update because of the following reasons. If you want to update your DSM to this version now, please click here to manually update it. Only Synology NAS with DSM 6.2.3 installed can be updated to this version.
The update is not available in your region yet. The update is expected to be available for all regions within the next few days, although the time of release in each region may vary slightly.
This update will restart your Synology NAS.
What's NewAdded support for Synology Expansion Unit FX2421.
Fixed IssuesFixed the issue where a DS920+ or DS720+ might not enter hibernation when its connected expansion unit has entered deep sleep.
Fixed the issue where drive status LED indicators on a connected expansion unit might not work properly when the expansion unit wakes up from deep sleep.
Fixed the issue where daylight saving time might not display correctly in certain time zones (e.g., Dublin, Casablanca).
Fixed the issue where mounted remote shared folders on a Synology NAS may cause volumes to operate improperly or the Synology NAS unable to shut down in certain scenarios.
Fixed the issue where the system might incorrectly prompt "drive slot disabled” notice when a DS413 or DS213+ wakes up from deep sleep.
Enhanced the performance in writing a large number of files to a Btrfs volume with RAID 1 configuration using hard disk drives (HDD).
Fixed the issue where Synology Universal Search and Synology Drive might consume excessive CPU resources when the option "Utilize unused memory as database cache to improve (search) performance" has been enabled.
Fixed the issue where domain-related services might not resume working because the update of domain data could not be complete.
Fixed security vulnerabilities (Synology-SA-20:18).
Fixed the issue where the system might incorrectly prompt IP address conflict warning if a network interface card is attached to Synology NAS and the option "Reply to ARP requests if the target IP address is a local address configured on the incoming interface" is disabled.
Fixed the issue where the status of an Ethernet port might not be detected properly when the Ethernet port is not connected to a network cable while Open vSwitch has been enabled. -
Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 6.2.3-25426
- Loader version and model: JUN'S LOADER v1.03b - DS3615xs
- Using custom extra.lzma: NO
- Installation type: HP N54L, Intel 82576 Dual RJ45 PCIe 2.0 x1, Enermax 2.5" x1, 3.5" x1 HDD Bay, PM-MSATA22GT-R (mSATA x2, SATA Gen3 x2) PCIe SATA Expansion Card
- Additional comments:
1. Update with DSM GUI to DSM 6.2.3-25426 Update 2 : All is work.
RedPill - the new loader for 6.2.4 - Discussion
in Developer Discussion Room
Posted
@WiteWulf said, not all Intel NICs work with DSM.
But if you have worked with Jun's Loader 1.0x (DSM 6.2.3 or below) I cannot help with that.
I think you have 4-Port Intel NIC, what chipset you used?
If your NIC chipset included e1000 driver category, it will be work.