Jump to content
XPEnology Community

robertodeguio

Rookie
  • Posts

    7
  • Joined

  • Last visited

Everything posted by robertodeguio

  1. Hello Sorry my english everyone this and the summary of my new Nas Components Matherboard P8H61-M LX3 R2.0 + CPU Intel i3-3220 processor 3.30 ... Ram 4 gb ddr 3 HD one 80GB plus two 500GB Thermaltake Case: H15 (for purchase) Software Boott loader XPEnoboot_DS3615xs_5.2-5967.1 DSM 5.2-5967 DSAssistant And a pc plugged into your network to prepare usb and install OS DSM 5.2-5967.pat My procedure if you want to try it Bios setting We have to set in the Sata configuratiion section we set ACHI In the boot section we set the usb careful in the motherboards with bioe UFFI there are two usb select the partition no UFFI Preparation of the usb Software Rufus Open Rufus leave everything by default insert usb load the boot; XPEnoboot_DS3615xs_5.2-5967.1. iso You will see a series of errors click on ok then the writing procedure starts once you have finished remove the usb and insert it into the pc that will become your Synology connect the pc to the network with the cable Log on to the PC and the XPEnoboot_DS3615xs_5.2-5967.1 screen appears during startup Be careful and fast with the arrows you move to the last section Let everything load there will be errors written in red ignore everything until the message DisckStation appears at this point we go to the second pc connected in the network and install DSAssistant and start the program And click on "SEARCH" once you have found your DisckStation follow the wizard to the point Which asks you to install the DSM 5.2-5967 you have to install manually load the file DSM 5.2-5967.pat At the end of the installation, the DSN restarts (a 10-minute countdown begins) if everything went well after two three minutes max the WELCOME screen opens at this point you are ready to set up your data and configure your Synology I HAVE INSERTED A SMALL HD (80 GB) where all the DSM files are installed THEN I connected The remaining HD 500 +500 and I created the volumes and shared folders PS DO NOT UPDATE Synology to update follow the guides on the forum https://xpenology.com/forum Saluti da Roberto alla prossima avventura 😀😀😀🚴‍♀️
  2. Hello I was able to install everything now I have this problem when I go to create a new volume I check this alert "connection failed check the network connection on all HD" I am attaching the file how I can solve this problem thanks Roberto errore.docx
  3. Hi question how do I reproduce a vm equal to the I3 3220 picture that I bought to try ??? which loader I use and what settings should I set on the VM thanks Roberto
  4. Ni got this on ebay an i3 with 4 gb of ram i hope it goes well Matherboard P8H61-M LX3 R2.0 + CPU Processore Intel i3-3220 3,30... Roberto then I use the charger 13b and as os. pat which one should I use Thanks
  5. Ni got this on ebay an i3 with 4 gb of ram i hope it goes well Matherboard P8H61-M LX3 R2.0 + CPU Processore Intel i3-3220 3,30... Roberto
  6. Hi everyone I wanted to make a new nas with a pc used a dual core soket 775 or an I3 socket 1155 with 4gb ram with two 2tb hd what kind of motherboard can i buy without spending too much thank you sorry for my English
  7. Salve provo a spiegare il mio problema istallo xpenoboot e fino a qua tutto ok istallo tramite synology web DS3615xs_25426.pat al riavvio il pc /nas mentre fa il conto alla rovesciae si riavvia poi al riavvio non trova hd dove e stato istallato il dsm perche dove sbaglio
×
×
  • Create New...