Transition Members
  • Content Count

  • Joined

  • Last visited

Everything posted by CreerNLD

  1. Great insight, well i don't have that many drives to make a test for you but it's perfectly possible to do so, in the end synology is still just linux and doesn't relay on the custom build synology software, yes it may take time for a avarage joe to make things supporting and communicating well but its deffinitly not impossible. With that, I'd say it would easily support 60+ on linux, probably would need to write ur own spk to do some user friendly magic but its deffinitly not impossible. I would, if i had, such a big array of drives. Im honestly thinking its possible.
  2. Probably the config file is set to 16 slots. Not sure why your config file is like that, could be because of a non original compiled dsm version or if you had a previous installation maybe somehow your cache has written it. Or even the grub.cfg could have a config line to edit before it boots the dsm. Could be many things really. No 16. Is not the maximum you can use up to 60+ on ANY dsm. Aslong as you edited the according files. Dont worry though even if it shows 16, everything is fine.
  3. CreerNLD


    Sounds like a faulty internet cable i had this a few days ago. Then realized my cable was fine i went ahead and started to check the dsm bootloader config if my network address was alright. Maybe u forgot one letter that's causing it. Alternatively, i went ahead disabled cache writing in hdd section to see if this would do something, then i preformed all smart tests on detailed not the quick one. All came back fine and then turned cache writing back on again. This did the trick for me, ever since that; no more issues. Maybe your pool is corrupted somehow. Tr
  4. I use \\ip.addr internally on my home network and so i was able to get 110mb/s transferspeeds. I have bought a domain name attached to my ip addr(ext) that i use so no need to write the port number; just reading what u said i think it makes sense now. I forgot to realize my parents have 200mb up and down. Would this result in 27/35 mb/s speeds? (Reading again; ah mbit not mbs. So outside seems right) Everything at home is 1gbit or even 10gbit. No 100mbit routings here. You fixed my issue my parents took a downgrade it seems without
  5. CreerNLD


    Define lagging what exactly laggs? The interface? The opening of spks? What is lagging
  6. CreerNLD


    I assume you've installed all freshly? in that case the Parity check on your drives might be running. Did you check that?
  7. Hi, Recently i opened up my nas to be reachable to the WWW, this because i travel alot. I noticed that, my 8tb drive locally ( using \\192.168.x.x ) writes to the folder @70 - 110 mb/s but when i use the WWW address (\\ it only writes 27 to 35mb/s Everything inside my house is supporting 1gbit/s and higher, all cables are cat 6a. SMB Encryption is off, SMB2 Lease enabled, Opportunistic locking enabled. MTU 1500, full duplex, 1000mbps How can i find out what's bottlenecking the transfers? I personally think it's a slow (
  8. Although this is true, 500mb/s is more than plenty for most users ( its also per lane ) duely to the stack push provided by the chip. And also depending on bus speeds, transaction encoding, and pci allocation you may result higher than 500mb/s. Picture below should give some clarity
  9. I forgot to mention im running ds3615xs. Is this also in the kernel? Or do i need a extra.lzma? Edit : misread your responce thank you for helping in advance. I really shouldnt stay more awake at 1am
  10. Hello everyone, im currently trying out on my Synology device to expand a single x1 slot to multiple x1 slots (board from aliexpress). the chipset on the expansion board is Pericom Pericom PI7C9X bridge chip. Could anyone make me a extra.lzma with the current given extra.lzma that exists, including my bridge chip ? This would be nice, as i run out of pci slots but my cpu is able to handle more, so given that we can include this driver all custom case build synology machines like mine can raise more and more pci expension cards (sata controllers etc). Yo
  11. You can run any sata drives on sas controllers, aswell as sas drives on the same controller. In the JBOD group, you can also mix those, interface doesn't matter in software, but the controller does / is required to communicate. Sata controllers can speak to sata. Sas controller can speak to sas and sata. (mixed) Yes; sas controllers works on normal motherboards, given that the DSM supports it, or if you have a corresponding extra.lzma with your driver. (multiple threads on the forum, you can find out about what dsm u got, and which cards are supported). *al