ewgennt

Thank you so much for the answer !! I will do so.

Thanks for the answer, I realized that the controller is not suitable. If I put a controller (Orient M9215S with a Marvell 88SE9215 chip) with 4 sata ports in the PCI-E slot, will the system see 4 disks? And another controller (Mini PCI-E PCI Express with 2 SATA ports with ASMedia ASM1061 chip), will the system see 2 disks?

A regular non-multiplex controller (Espada PCIe4SATA3ASM) is inserted into the PCI-E 2.0 slot of the motherboard. But the system sees only 4 disks, 2 connected to the motherboard and 2 connected to the controller. If you connect one disk to the controller in turn in each slot, then it is visible in the system.

Hi, everybody. Please do not kick hard, I'm new here (I apologize in advance for the stupid question). I have a motherboard (ASUS j1800i-c) with 2 SATA ports and a controller (PCI-E to 4 SATA) with 4 SATA ports is inserted into it. When I connect 6 disks to all ports, the system only sees 4 disks. Do I understand correctly that I have an incorrectly set (Sata Port Map=6)? I heard that (Sata Port Map=24) can help the system see 6 disks? The system is installed jun 1.04 b for DSM6.2.3 for 918+.