cosmindnl

Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.1.1-42962 Update 6 - Loader version and model: JunARPL v1.1-beta2a - DS1621+ ... switched to ARC 24.2.3-next - DS1621+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - Supermicro X11SSZ-TLN4F + Intel Xeon E3-1245 v5 - Additional comment: NvME cache working after update, all 4 NIC available (2 x 1GBe + 2 x 10Gbe) , 32 GB RAM ECC available, 10GBe connection working. Reboot required: No

Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.3-25426 Update 2 - Loader version and model: JunARPL v1.1-beta2a - DS1621+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - Supermicro X11SSZ-TLN4F + Intel Xeon E3-1245 v5 - Additional comment: NvME cache working after update, all 4 NIC available (2 x 1GBe + 2 x 10Gbe) , 32 GB RAM ECC available, 10GBe connection working. Reboot required: No

Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.3-25426 Update 2 - Loader version and model: Jun's Loader v1.04b - DS918+ (with NVME cache) - Using custom extra.lzma: Yes. v0.11 from IG-88 - Installation type: BAREMETAL - Supermicro X11SSZ-TLN4F + Intel Xeon E3-1245 v5 - Additional comment: NvME cache working after update, all 4 NIC available (2 x 1GBe + 2 x 10Gbe) , 32 GB RAM ECC available, 10GBe connection working. H/W transcoding works also using driver extension for 918+ , v0.11, Reboot required: No

Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.3-25426 - Loader version and model: Jun's Loader v1.04b - DS918+ (with NVME cache) - Using custom extra.lzma: Yes. v0.11 from IG-88 - Installation type: BAREMETAL - Supermicro X11SSZ-TLN4F + Intel Xeon E3-1245 v5 - Additional comment: NvME cache working after update, all 4 NIC available (2 x 1GBe + 2 x 10Gbe) , 16 GB RAM available, 10GBe connection working. H/W transcoding works also using driver extension for 918+ , v0.11, Reboot required: No

- Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.3-25423 - Loader version and model: Jun's Loader v1.04b - DS918+ (with NVME cache) - Using custom extra.lzma: Yes. v0.11 from IG-88 - Installation type: BAREMETAL - Supermicro X11SSZ-TLN4F + Intel Xeon E3-1245 v5 - Additional comment: NvME cache working after update, all 4 NIC available (2 x 1GBe + 2 x 10Gbe) only first two usable (I have hardware disabled one 1GBe NIC in order to use 10 GBe NIC), 16 GB RAM available, 10GBe connection working. H/W transcoding works also using driver extension for 918+ , v0.11, Reboot required.

Hi, It is any chance to get 561FLR-T adapter up an running on non HP PC, eg. ASUS motherboard? https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-c03897279

Run this command in terminal: rm -rf /usr/lib/modules/update/*

IG-88 you are FANTASTIC!!! I have changed bios settings for internal graphics and now everything works perfectly. ~# ls /dev/dri card0 renderD128 Thanks a loot. Lesson learned: RFM (Read the Fucking Manual)

Now running DSM 6.2.3, Jun's 1.04b patched with extra/extra2 v 0.11 and rd.gz + zImage from DSM_DS918+_25423.pat Outcome: /dev/dri - missing Loaded modules after restart

Now I'm running with original Jun's 1.04b butloader

Hi, I have reverted back to initial setup. DSM 6.2.3, Jun's 1.04b After restart /dev/dri - missing

I will restore initial setup and I will provide logs.

I’m running now test setup with 6.2.0 sent by you

This is dmesg log

I have did the test installation using .pat sent by you and original jun's boot loader 1.04b, no luck. root@nas:~# ls /dev/dri ls: cannot access /dev/dri: No such file or directory What commands should I use to get "dmesg"

I'm new to Xpenology, I did fresh install with 6.2.2 and immediately upgraded to 6.2.3 and from hear fun starts for me. Upgrade from 6.2.2 to 6.2.3 was flawless, works with no issues and after that I have added NvME cache.

I’m afraid of downgrade because I use NvME SSD cache an most probably I will lose it. I will do a test setup in few days

HI, I'm trying to get H/W transcoding up and running, but without success. Configuration: Baremetal Supermicro X11SSZ-TLN4F + Intel Xeon E3-1245 v5, DSM 6.2.3-25423, Jun's Loader v1.04b. I have tried both extra.lzma/extra2.lzma v0.10 and v0.11 and zImage and rd.gz from "DSM_DS918+_25423.pat, with same outcome: 1. /dev/dri - missing 2. Codecs activated manually "synocodectool --activate_codec hevc_dec --pkgname videostation" 3. activation.conf - available "more /usr/syno/etc/codec/activation.conf" --->> {"success":true,"activated_codec":["vc1_dec","vc1_enc","h264_dec","h264_enc","mp eg4part2_dec","hevc_dec","ac3_dec","aac_dec","aac_enc"],"token":................................} 4. Cleared the update lib.: /usr/lib/modules/update/ Any advice for me!?

- Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.2-24922 Update 6 - Loader version and model: Jun's Loader v1.04b - DS918+ (without NVME cache) - Using custom extra.lzma: Yes. v0.11 from IG-88 - Installation type: BAREMETAL - Supermicro X11SSZ-TLN4F + Intel Xeon E3-1245 v5 - Additional comment: Added manually PATCH for NvME cache (and working), all 4 NIC available (2 x 1GBe + 2 x 10Gbe), 16 GB RAM available, Power consumption with 4 HDD x 12 TB (RAID 5) and ~ 100 Mb traffic it is around 65W, 10GBe connection not tested yet. H/W transcoding works also using driver extension for 918+ , v0.11