yuyuko

can ds918+ support I255 b3 ？

seems link broken with ds918+ DSM 6.2.3 v 0.12.1 can u uoload again QAQ

I've set those settings in files but i350T2 still can't work (system only detect 2 nic's(MB lanport) ) gruf.cfg 👇 set sn=XXXXX set mac1=XXXXXXXXB402 set mac2=XXXXXXXXB403 set mac3=XXXXXXXXB404 set mac4=XXXXXXXXB405 set netif_num=1 /etc/synoinfo.conf 👇 change: maxlanport="4" add: eth2_mtu="1500" eth3_mtu="1500" eth2_wol_options="d" eth3_wol_options="d" same with /etc.default/synoinfo.conf Is that extra.lzma problem with drive? or DS918+ 6.2.3 adds new settings to limite nic num support over 2 .

I've set those settings in files but i350T2 still can't work (system only detect 2 nic's(MB lanport) ) gruf.cfg 👇 set sn=XXXXX set mac1=XXXXXXXXB402 set mac2=XXXXXXXXB403 set mac3=XXXXXXXXB404 set mac4=XXXXXXXXB405 set netif_num=1 /etc/synoinfo.conf 👇 change: maxlanport="4" add: eth2_mtu="1500" eth3_mtu="1500" eth2_wol_options="d" eth3_wol_options="d" same with /etc.default/synoinfo.conf Is that extra.lzma problem with drive? or DS918+ 6.2.3 adds new settings to limite nic num support over 2

after 4 tests with: NO.1: doesn't work.default disk sequence set extra_args_3617='SasIdxMap=0 DiskIdxMap=0005 SataPortMap=65' set sata_args='sata_uid=1 sata_pcislot=5 synoboot_satadom=1 SasIdxMap=0 DiskIdxMap=0005 SataPortMap=56' NO.2:ddoesn't work.default disk sequence set extra_args_3617='SasIdxMap=0 DiskIdxMap=0005 SataPortMap=65' set sata_args='SasIdxMap=0 DiskIdxMap=0005 SataPortMap=56' NO.3: work,MB sata controller disk sequence from 6-11 ,JMB585 disk sepuuence from 1-5 set extra_args_3617='SasIdxMap=0 DiskIdxMap=0500 SataPortMap=65' set sata_args='SasIdxMap=0 DiskIdxMap=0500 SataPortMap=65' NO.4:doesn't work and disconnect with dsm set extra_args_3617='SasIdxMap=0 DiskIdxMap=05 SataPortMap=65' set sata_args='SasIdxMap=0 DiskIdxMap=05 SataPortMap=65' now,uncertain settings: sata_uid=1 ata_pcislot=5 synoboot_satadom=1 those three settings only show in DS3617 gruf.cfg. DS918 doesn't have it. for sure is those three settings can let NO.3 back to default disk sequence. I don't know these three Settings means what in DSM.

https://gugucomputing.wordpress.com/2018/11/11/experiment-on-sata_args-in-grub-cfg/ sorry there.By learned this blog,I know that we can change sata controller supports,but still don't know how to deal with the disk sequence. wanna ask:if there's any possible to change mb sata controller Disk sequence,not default from 1 -6. Use 7-12 instead. my MB has 6 sata ports default,and second sata controller is JMB585 with 5 sata ports. I want change disk sequence like 1-5(JMB585) 6-11(MB sata ports from 0-5). I‘ve tested with : SasIdxMap=0 DiskIdxMap=0005 SataPortMap=56 SasIdxMap=0 DiskIdxMap=0500 SataPortMap=65 SasIdxMap=0 DiskIdxMap=05 SataPortMap=65 but none of them can work

https://gugucomputing.wordpress.com/2018/11/11/experiment-on-sata_args-in-grub-cfg/ sorry there.By learned this blog,I know that we can change sata controller supports,but still don't know how to deal with the disk sequence. wanna ask:if there's any possible to change mb sata controller Disk sequence,not default from 1 -6. Use 7-12 instead. my MB has 6 sata ports default,and second sata controller is JMB585 with 5 sata ports. I want change disk sequence like 1-5(JMB585) 6-11(MB sata ports from 0-5). I‘ve tested with : SasIdxMap=0 DiskIdxMap=0005 SataPortMap=56 SasIdxMap=0 DiskIdxMap=0500 SataPortMap=65 SasIdxMap=0 DiskIdxMap=05 SataPortMap=65 but none of them can work

still same problem TAT and I had moved system to 3617,it works with all drives' smart

thanks,but where can I download that version 0.0

DS918+ 6.2.3 25426 LSI-9207 IT mode with 4 4T Seagate IronWolf HDD（raid5） issue: all drives can be detected in dsm system ,but system keeps showing ：Volumne 2 Warning:This storage has entered the warning status.Please go to the HDD/SSD page to check the drives with issues. when I checked in that page ,I just found those 4 HDD don't have S.M.A.R.T values IS that what u said in edit2 ? and except reinstall/move to 3617 ,is there any way to fix it ？

I've tested with all ACPI/power settings(with i can see in the pages) on bios,after verious attempts it still can't work T_T

thx，I'll try with acpi/power bios settings,see if it can fix it. why i want to use 3617: 1.918 only can detect 4C/8T , 3617 can work with 8C/16T. 2.918 only can active 2 nics there,3617 can active at least 4 XD, hope u have a great weekend. still looking forward to the day when 3617/15 new extra.lzma comes out~

0.0,all dmesg log here. dmesg.log

thanks. I did rm -rf /usr/lib/modules/update/ and reboot ，it doesn't work for me. I also tried let my friends give me all files from modules folder and replace all，doesn't work too.(3617 dsm6.2.3-25426 works on his mechine) how to use dmesg commands to check errors from logs.

will extra.lzma for 3615/3617 come out 0.0 issuse: after I moved 918 to 3617(both are 6.2.3-25426 same version with jun's original extra.lzma),i just found I can't shutdown in system, don't know why.