StandardToast

Hi @bearcat thanks somehow this wasnt set and is now booting up however I still run into issues. When loading up I am not able to find it on the network but 9/10 times it shows as "Migratable" status and not install. Once I had it as install and the install failed with error 23 saying corrupt file. I have confirmed the pat file is not corrupted and it seems to still have issues installing. I wiped all my internal drives again as well as the destination flash drive and it did not work. I am mainly trying the 1.03 loader and DS3617 and DS3615 both dont work despite me confirming the hardware is compatible with that version. I have tried multiple flash drives and re making the boot loader and just as this other forum post its not working. Is this an issue with Super Micro boards? Additionally I have yet to try installing the exta .lzma drivers because I dont understand the instructions. Anytime I make the boot loader and plug it into my windows 10 it cannot read it. One final question is when installing should there be a 2nd empty flash drive as the destination for the boot loader to write to in the computer? This wasnt clear to me in the tutorials.

I also get this issue on a super micro board. Did you find any other solution? I too have tried multiple thumb drives

Hey, I have performed a first time install on customer hardware. I used the mod that jun made and it works fine. I first tried to use the DS918 but that did not work likely due to my older hardware. Based off this post I also tried using the DS3617 and DS3615 - These both work up until the step of installing the .pat file. I can successfully get to find.synology.com and click on install for the DS3617 or DS3615 but it then says "No Hard Disk Found on DS3617xs" or "No Hard Disk Found on DS3615xs" respectively. I am also able to see the diskstation show up in the downloaded Synology Assistant software but when installing it wants a version newer than 23xxx and doesnt accept the 15284 version that I found in the install guide. I have confirmed all my drives work and tried in a number of combinations - all 6 drives in 2 drives 4 drives 1 drive etc. No luck. Can you please recommend any other troubleshooting steps? My hardware specs are below SuperMicro X8DAH+-F Motherboard Dual Xeon X5687 x2 quad  core 32gb ECC Ram (16 gb each 2x8gb sticks) 3 2tb hitatchi drives 3 1tb WD drives I have tried a combo of just 2tb or just 1tb drives and it still was not working. Thanks for any help