Jump to content
XPEnology Community

dyter

Member
  • Posts

    69
  • Joined

  • Last visited

Everything posted by dyter

  1. I edit the file syno_localinstall_dsm.sh in usr/syno/sbin with # in 3 last lines to solve the fist one because it's a permanent useless ping. For "synobios get empty ttyS current" I found the problem in ACPI bios
  2. I search a solution for speed up license plate. I read that DVA3221 can read at 40km/h a vehicule. But on mine DVA1622, the car speed must under 5 km/h for detect license plate. I found model.xml in directory /volume1/@appstore/SurveillanceStation/dvacore/etc/model/PlateDetection but I show nothing in openvino documentation
  3. I can make 4/5 task for a CPU à > 90%, but it depend of resolution of task, area size and fps. On 4K it can more than 100% of CPU core if area is too big. I test facerec on my 1080P cam with a full area zone: 5 fps: 20% of one core 15 fps: 70% 25 fps: 90% You can test it with command "htop" and filter "synofaced"
  4. Thank, but I already tested and same problem Before I change my N3150 hardware by a J5040, I only had the "synobios get empty ttyS" log, but now I have in addition the "syno_localinstall_dsm.sh" in my log. I disable all serial interface in bios, but flood log stay.
  5. Hello, I have exacly the same in my logs, do you found the solution to stop these ?
  6. Yes I use my old mpcie ASM1062 x2 SATA (see my last post) with x1 SATA build-in PC and x1 msata build-in PC, but I use only 3 drives in SSD format. I just test with 3 tasks AI at this moment, and CPU up at 80% but stay at 2Ghz max, turbo doesn't seen to work. For people interested, you can buy this mini PC here: https://fr.aliexpress.com/item/1005006220488959.html (the msata slot is on the other side of motherboard, you have MSATA + MVE/M2 + MPCIE SLOTS !)
  7. I found the problem, when I renamed this 2 process, these missing: mv /volume1/@appstore/SurveillanceStation/synodva/bin/synodvad.old synodvad mv /volume1/@appstore/SurveillanceStation/synodva/bin/synofaced.old synofaced So, I reinstalled the SurveillanceStation-x86_64-9.1.4-11002_openvino.spk, and it work now !
  8. Ok, I received my new mini PC J5040, all work mpcie 4x SATA ... but AI not work I run with the loader arc and i915 drivers
  9. For foodies I also found this for less $20, you can up to 7 SATA drives on ALI mini PC ! https://fr.aliexpress.com/item/1005005653706057.html
  10. If you need msata support a this mini PC, you can buy for $3 a M.2 NGFF to MSATA here: https://fr.aliexpress.com/item/1005005890645530.html
  11. I don't need M2 or msata, only mPCI slot is usefull for me, because I use 3x SATA SSD drives And finally I order the J5040 because J4125 is out of stock
  12. I found lot of mini PC with J5040 with prices 110-140€: https://fr.aliexpress.com/item/1005006311813456.html but it's M.2 2280 + 1 SATA, and miniPCI is under the M.2 2280, so no ASM1062 support or, only ASM1062 support with no M.2 2280 If you buy this: you can up to 5x SATA with this miniPC with a J5040 power !
  13. I use actualy a baremetal with minipci x2 SATA and it's work fine ! lspci -nn 0000:03:00.0 SATA controller [0106]: ASMedia Technology Inc. ASM1061/ASM1062 Serial ATA Controller [1b21:0612] (rev 02)
  14. This miniPC has no nvme storage, on motherboard, there was 1 port msata + 1 port SATA + 1 port miniPCIe I use 3x SSD with cache inside
  15. I found lot of mini PC on ALIEXPRESS with 13th generation N100, J6426 ... I hesitate with a J5040 (the best of 14nm CPU Geminilake), but I finaly chose this miniPC for better compatibility : I remove everytime the miniPCIe Wifi and replace them with a miniPCIe SATA x2 controller that give to me a total of 4x drives.
  16. I found lot of mini baremetal with J6426 or N100 with very low price. But it's gen 11th or 13th ! I waiting for i915 drivers
  17. Thanks, I think buy a N5000 for his low consupsion and better GPU
  18. I migrate my DSM 6.2.3 to 7.2.1 rev 4 with no problem on my Braswell N3150 with the i915 addon. All work but no AI, if exist a solution, I'll take it !
  19. On https://dgpu-docs.intel.com/devices/hardware-table.html I use the command: lspci -nn |grep -Ei 'VGA|DISPLAY' 0000:00:02.0 VGA compatible controller [0300]: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Integrated Graphics Controller [8086:22b1] (rev 21) and I show 22B1 is a Intel® HD Graphics XXX Gen8 Cherryview This card is supported in the i915_pciids.h, so I need to use Patch i915 in arcloader for AI work ?
  20. I don't know where you find this number of generation ? N3150 is 8th generation and J4125 9th generation: https://www.cpu-monkey.com/fr/compare_cpu-intel_celeron_n3150-vs-intel_celeron_j4125
  21. I have a braswell Celeron N3150 with IGPU Intel HD Graphics 400, I not sure is compatible for AI ?
  22. Same problem with last 24.2.3 in DSM 7.2.1 update 4, the DSM control panel not working but work fine with the TRCP loader
  23. This doesn't work, I use in auto task: rm /volume2/surveillance/@eaDir -rf
  24. Comme je ne travail pas chez EDF et que j'ai une baie info en taille limité, j'ai actuellement un NUC avec N3000 4 Watts en guise de serveur, largement assez puissant pour tout faire (domotique, torrent, web heberger, DNLA, cameras, ...) mais un peu juste pour faire de la virtualisation. Là je vais passer donc sur un petit barbone avec N3150 6 Watts toujours gravé en 14nm et bon marché, histoire d'avoir 2 coeurs et 2 ports SATA de plus avec ce montage: Le tout avec 8GB de ram acheté sur ALI pour moins de 130€ J'utilise le loader 1.04b pour 918+ afin de profiter de la compréssion matériel entre autre du N3150
×
×
  • Create New...