Jump to content
XPEnology Community

Addi1981

Rookie
  • Posts

    8
  • Joined

  • Last visited

Addi1981's Achievements

Newbie

Newbie (1/7)

0

Reputation

  1. Hi luchuma, actually your proposal did the trick. After removing the datastore it is finally working. Big thx for that.
  2. Hi, there is 1 x USB pan drive 1 x CD-ROM 1 x NVMe SSD in Datastore VM_Store 1 x 1TB Hard drive in Datastore VM_Store_HDD So it is two physical disks in two seperate stores. Big thx for your support.
  3. I tried it already, doesn't seem to help.
  4. Hi all, I am currently running ESXI 6.7 from usb drive. My VM's are stored on a M2-SSD. In addition there is a 3.5 Disk installed. So far the setup is fine and XPENOLOGY is booting up ok. Now I would like to pass the 3.5 Hard drive via RDM to the virtual machine. I do have two datastores atm, VM_Store which is the M2 drive and VM_Store_HDD which is the 3.5 hard drive. I have created the RDM via vmkfstools -z /vmfs/devices/disks/t10.ATA_____ST1000DM0102D2EP102__________________________________W9AFSYJ0 "/vmfs/volumes/VM_Store_HDD/RDM-VM-1TB.vmdk" Editing the virtual machine and adding the RDM-VM-1TB.vmdk stored in the VM_Store_HDD datastore, I always get the following error. "Failed to reconfigure virtual machine XPENOLOGY_VM01. Incompatible device backing specified for device '6'. - dismiss" The configuration of the VM I have attached as a JPG. Help would be really appreciated. Regards.
  5. Addi1981

    Dell T30

    Hi, danke für Deine Antwort. Ich tendiere aktuell dazu eine Kombination aus Proxmox und XPEnology zu verwenden. Hat schon jemand Erfahrungen mit dem passthrough von Festplatten an XPEnology gemacht? Gehen diese in den Spin down? Gruß
  6. Addi1981

    Dell T30

    Hallo zusammen, ich habe einen Dell T30 (Intel® Xeon® E3-1225 v5) im einsatz. Auf diesem würde ich nun gerne direkt XPEnology installieren. Ich möchte das Betriebssystem und einige VM's direkt von der M2 SSD nutzen und dann noch drei weitere 3,5er Festplatten. Hier ein paar Fragen: Kann ich die VM Images direkt auf die "System SSD" laden wo dann auch das Betriebssystem installiert ist? Soll ich den DSM 6.2 loader verwenden, oder doch etwas älteres, da stabiler?! Gibt es etwas spezielles was ich beachten sollte? Danke für Eure Hilfe, Adrian
×
×
  • Create New...