Jump to content
XPEnology Community

premiero

Member
  • Posts

    19
  • Joined

  • Last visited

Posts posted by premiero

  1. Back on the track. :)

    Switched to Automated Redpill Loader, updated to DSM 7.2.1-69057

     

    dd if=/dev/zero bs=1M count=32768 | md5sum
    32768+0 records in
    32768+0 records out
    34359738368 bytes (34 GB, 32 GiB) copied, 76.2439 s, 451 MB/s
    69a85eaa6fd28784c634a6bcb1d5984c  -
    
    
    time $(i=0; while (( i < 9999999 )); do (( i ++ )); done)
    
    real    0m45.014s
    user    0m44.995s
    sys     0m0.010s
  2. On 1/24/2020 at 2:30 PM, premiero said:

    Loader: jun 1.04b (DS918+)

    DSM: 6.2.2-24922 Update 5

    Hardware: Baremetal, Chieftec ix-03b-op, Asrock J5005 ITX, 1x8GB RAM (Single Channel), 2x5TB Seagate ST5000LM000 SHR-1

     

    /$ dd if=/dev/zero bs=1M count=32768 | md5sum
    32768+0 records in
    32768+0 records out
    34359738368 bytes (34 GB) copied, 74.3319 s, 462 MB/s
    69a85eaa6fd28784c634a6bcb1d5984c  -

    CPU Load durig test ~28%

    /$ time $(i=0; while (( i < 9999999 )); do (( i ++ )); done)
    
    real    0m49.016s
    user    0m49.006s
    sys     0m0.000s

    CPU Load during test ~25%

     

    Loader: tinycore-redpill-uefi.v0.8.0.0.img

    DSM: 7.1.1-42962 Update 1

    Hardware: the same hardware, but 2x8GB RAM, 2x8TB SSD SAMSUNG QVO SHR-1,
     

     

    dd if=/dev/zero bs=1M count=32768 | md5sum
    32768+0 records in
    32768+0 records out
    34359738368 bytes (34 GB, 32 GiB) copied, 131.855 s, 261 MB/s
    69a85eaa6fd28784c634a6bcb1d5984c  -
    time $(i=0; while (( i < 9999999 )); do (( i ++ )); done)
    
    real    1m25.192s
    user    1m24.891s
    sys     0m0.274s

     

    CPU performance drop twice? WTF?

  3. Outcome of the update: SUCCESSFUL

    DSM version prior update:  Jun's Loader v1.04b DS918+, DSM 6.2.3-25426 Update 3 (DS918+)

    Loader version and model: tinycore-redpill-uefi.v0.8.0.0.img, DSM 7.1-42661 (DS918+)

    Installation type: Baremetal ASRock J5005-ITX, 16 GB RAM, 4x SATA drives

  4. Asrock J5005 ITX.

    extra918plus_v0.8_syno

    Baremetal fresh install: Success

    Update from 6.2 (DSM_DS918+_23739.pat): Success

    Comments: Shutdown and reboot works good. No errors at dmesg. No dev/dri. Next updated to DSM 6.2.2-24922 Update 5 - still works good.

     

    extra918plus_v0.8_std

    Baremetal fresh install: Failed

    Update from 6.2 (DSM_DS918+_23739.pat): Failed

    Comments: Lot of errors at dmesg. I was able to finish install with extra918plus_v0.8_recovery, but still lot of errors, no dev/dri, shutdown and reboot not working.

  5. 17 hours ago, toyanucci said:

    Yh, but does it work is alls I'm asking. That's the only reason j4105 users haven't updated to 6.2.2 as you know. Those that don't care about hw transcoding have updated though so I'm just curious if this will allow that to work. 

    I just checked - no it's not working. Tried with 6.2.2-24922 Update 4, and 6.2.2-24922 Update 5. There was no dev/dri, and reboot / shutdown was not working.
    I have also tried @IG-88 0.6 driver extra test package, but still no succes - not able to power off/restart too and no HW transcoding.

  6. [Fri Jan 24 22:43:15 2020] [drm] GuC: No firmware known for this platform!
    [Fri Jan 24 22:43:15 2020] [drm] HuC: No firmware known for this platform!
    [Fri Jan 24 22:43:15 2020] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
    [Fri Jan 24 22:43:15 2020] [drm] Driver supports precise vblank timestamp query.
    [Fri Jan 24 22:43:15 2020] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
    [Fri Jan 24 22:43:15 2020] [drm] Finished loading DMC firmware i915/glk_dmc_ver1_04.bin (v1.4)
    [Fri Jan 24 22:43:15 2020] systemd-udevd[5868]: starting version 204
    [Fri Jan 24 22:43:16 2020] [drm] failed to retrieve link info, disabling eDP
    [Fri Jan 24 22:43:16 2020] [drm] Initialized i915 1.6.0 20180514 for 0000:00:02.0 on minor 0

    Thats how it is looking on J5005-ITX and juns 1.04b loader.

  7. Read this topic mate. You have all in it 😁. In case You didn't notice:


    First of all, You can't use DOS version of mactool, because this is UEFI only motherboard and do not support LEGACY mode.

    1. Prepare pendrive. Write HirensBoot CD PE on it using ISO2USB

    2. Next unpack and copy MAC change tool: https://1drv.ms/u/s!Ap4vsEUrPToyh2746hR4GRDPPocn to this pendrive.

    3. Boot from pendrive to Windows PE. Browse start menu and mount pendrive as C harddrive.

    4. Type cmd. Go to the folder where You copied wMAC tool.

    5. At commandline type:

    wMAC c YOUR_NEW_MAC_ADDRESS /s

    6. Done.
     

     

  8. 41 minutes ago, toyanucci said:

    I have the asrock j4105. Do you think this will work in my case as well?

    There is a good chance it will work. There is minor difference in CPU (same architecture, lower CPU and GPU clock, less -4 execution units).


     

    Quote

    Would I flash the Mac while still using 6.2.1 then update to 6.2.2?

    Flashing MAC in not an issue, You can do it whenever You want. Just don't forget to edit grub.conf.
    But I can't confirm that everyting will be working after upgrade. When I did first install of DSM 6.2.2-24922 Update 4, i had no dev/dri and shutodown/reboot was not working at all. Thats why i downgraded to 6.2-23739. Maybe instaling first 6.2 and than upgrading to 6.2.2-24922 Update 4 is the solution, but I haven't test it yet.

  9. 2 minutes ago, IG-88 said:

     

    from my experience thats because of a driver crashing on boot (kernel oops), by using a proper driver or removing the driver it should work

    atm its very likely to happen with jun's original or my old 918+ extra.lzma, unreleased 0.7 or newer will get rid of that for most cases

    so in case of shutdown problems check dmesg

    Yeah, I saw Your posts in other topic. But can't test it ATM because of HDD parity check.

    dmesg - no erros, so there is a little chance it is working with this older DSM verision.

  10. I think, I can confirm that both HW and SW transcoding are working on Asrock J5005 ITX.

     

    Original Jun 1.04b loader (no custom extra.lzma)

    DSM 6.2-23739 (DS918+)

    Real SN from my Synology DS918+ & MAC (onboard flashed)

     

     

    obraz.thumb.png.0691980d8dc2b240c0afe0c99b5de4cb.png

     

    Need to check if Power Off / Reboot is working (as it did not at DSM 6.2.2-24922 Update 4)

  11. Loader: jun 1.04b (DS918+)

    DSM: 6.2.2-24922 Update 5

    Hardware: Baremetal, Chieftec ix-03b-op, Asrock J5005 ITX, 1x8GB RAM (Single Channel), 2x5TB Seagate ST5000LM000 SHR-1

     

    /$ dd if=/dev/zero bs=1M count=32768 | md5sum
    32768+0 records in
    32768+0 records out
    34359738368 bytes (34 GB) copied, 74.3319 s, 462 MB/s
    69a85eaa6fd28784c634a6bcb1d5984c  -

    CPU Load durig test ~28%

    /$ time $(i=0; while (( i < 9999999 )); do (( i ++ )); done)
    
    real    0m49.016s
    user    0m49.006s
    sys     0m0.000s

    CPU Load during test ~25%

  12. On 11/10/2019 at 3:51 PM, adept said:

    Did you actually try it yourself?

     

    When I tried it did not quite work as expected, when trying to change the mac it will only let you change part of it, the rest is hardware manufacture specific.

     

    I did. I started Hiren's BootCD PE from my USB, than i ran wMAC tool provided by @sergelhr using bellow command:

     

    wMAC c 001122334455 /s

    Asrock J5005 ITX works like a charm with this tool. Just don't forget the /s at the end of command which is related to "skip MAC OUI check".
     

     

×
×
  • Create New...