[HP GEN 8 HELP! Please]

Hello, arpl works fine but when i want to install dsm the installation stops at 55 % ,somebody knows what to do?

 

regards 

[DSM 7.1-42661 Update 3]

On 10/22/2022 at 8:26 PM, amikot said:

- Outcome of the update: UNSUCCESSFUL

- DSM version prior update: DSM 7.1.0-42661 (failed update with TCRP v9.2.9)
- Loader version and model: Auto Red Pill Loader v0.5alpha1 - DS3615xs
- Using custom extra.lzma: NO
- Installation type: BAREMETAL - HP N54L 

 

Followed very easy steps of menu.sh - selected bromolo-7.1.0-42661.  newer version were unavailable for DS3615sx. 
Unfortunately, generated loader didn't boot - probably DSM partition is broken with TinyCoreRedPill and don't want to boot into any shape.
With ARPL machine cannot be discovered in the network as it was with TCRP. 
 

I also install With ARPL but machine cannot be discovered in the network 

HP Gen7 N54L but with DS3622XS

[Problem to install on HP Microserver GEN8 - 7.1-DS3622xs+-42661]

On 1/30/2023 at 4:33 PM, aoprea said:

Me too i have migrate 4 x 4Tb hdd from a xpeno ds920+ to a baremetal HP Microserver gen8 using latest ARPL

all migration proces is done and perfect

Question is it's good or bad to change filesistem volume to BTRFS (now its ext4)

I weill use HPMgen8  at home for general ussage:

- store many family photos

- photo station

- store movies

Its deserve to delete ext4 volume and make new one btrfs ?

Hello, what are your results?

 

[Problem to install on HP Microserver GEN8 - 7.1-DS3622xs+-42661]

On 3/10/2023 at 1:13 PM, freak said:

I have installed my NAS and answers to myself :

 

 - Why do you prefer ARPL instead of TCRP for this model (I always use Jun or TCRP for my old NAS) ?

    ARPL seems to be the simplest loader builder

 - Should I disable the HP RAID interface (I think so, because of the driver issue) ?

    Yes, by choosing SATA AHCI. There is no driver for this RAID interface.

 - Does the disks order is the same as physical bay with the command "./rploader.sh satamap" ?

    Yes, no command needed (with ARPL in my case)

 - Is it possible to use a SSD as first drive (for DSM) and a RAID volume with other disks for data without issue (My goal is to prevent volume issue if an update go wrong) ?

    No, each disk contains the OS

 - I know loaders well but feel free to give me hints for this particular hardware

    I found a lot of fresh information in the posts from @Madasafish  @nemesis122

How did you make a ssd as first drive for your DSM?

, no command needed (with ARPL in my case)

 - Is it possible to use a SSD as first drive (for DSM) and a RAID volume with other disks for data without issue (My goal is to prevent volume issue if an update go wrong) ?

[SSH on Xpenology]

On 10/28/2020 at 8:07 PM, IG-88 said:

Thanks, it already runnig!

 

dsm is a linux appliance and does not have a package managment like apt or yumm its more like a fixed environment for more stability

the normal way for a native running app would be synologys package center in the webgui, these spk packeges need to be build specifically for synology (https://synocommunity.com/)

the more modern way and not bound to synology would be docker

 

in your case there seems to be a native package

https://community.home-assistant.io/t/hass-io-on-synology-dsm-native-package/125559

 

but as flyride already mentioned its better to use docker images, there will be a wider selection and they will get more updates

even synology has started to use docker for some former native packages

 

 

[SSH on Xpenology]

Hello, mayby a noob question, but what are commands on Xpenology in putty? I try to install Hassio - Home Assistant, but the commands don't work, is that because i have Xpenology?

or are the commands different in Xpenology?

 

I try this too install, but at the SSH i can get futher.

 

[HP N54L Bare Metal New Install 6.2.1 Update 4]

Do i need a HP NC360T? or can the intern nic work just fine?

[s/n and mac adres for my HP Proliant Microserver N54L]

On 11/13/2019 at 3:56 PM, bearcat said:

 

The BIG problem would be that your N54L is using an AMD CPU, not supported on the 918 platform.

 

I would advice you to use Jun's loader 1.03b for the 3615 platform, with DSM 6.1.7-15284 (update 3),

this will give you a stable system, and it will not let you update to the 6.2.x by mistake.

Do i need a other nic or can i use the intern nic?

[s/n and mac adres for my HP Proliant Microserver N54L]

1 hour ago, bearcat said:

 

The BIG problem would be that your N54L is using an AMD CPU, not supported on the 918 platform.

 

I would advice you to use Jun's loader 1.03b for the 3615 platform, with DSM 6.1.7-15284 (update 3),

this will give you a stable system, and it will not let you update to the 6.2.x by mistake.

Thanks for this answer!

 

 

Maybe for the future, what are the requirements to run 918+ xpenology?

[s/n and mac adres for my HP Proliant Microserver N54L]

34 minutes ago, jensmander said:

When modifying the grub.cfg leave the serial as it is and enter the MAC from your N54L. But this is no must-have unless you want to use features like WoL. 

Thanks Jens your the best!

[s/n and mac adres for my HP Proliant Microserver N54L]

Hello, i need some help this is my first time to build a Xpenology, i have all ready download files, but i got stuck on the s/n and mac, i like too have 918+ but it seams too be a problem to get a s/n and the mac,why is that?

For what i understand is that 918+ already have shr in it.