Jump to content
XPEnology Community

Savek

Rookie
  • Posts

    9
  • Joined

  • Last visited

Everything posted by Savek

  1. Und für 7.0.1 auf Broadwellnk (3622xs+) mit kernel 4.4.108+ Enthält auch noch die Treiber für ACPI Power-Button (benötigt die acpi-extension) und läd auch die USB-Serial-Treiber, das kann aber einfach im "extra_modules.sh" angepasst werden. synology_broadwellnk_3622xs+_4.4.180+_extra_modules.tgz
  2. I just installed on baremetal GA-Z77X-UD5H with i7-3770 - using the 3615xs bromolow image. The only thing that did not work was the setting of the Sata and Drive map. While the board has 6+2+2 SATA-Ports, I had to set the satamap to "1" and attach the test HDD to the first SATA-port on the board (drive map as "00"). With the "correct" settings, I would only get error messages about drive errors and disabled sata ports. Using the "1" and "00" settings, I was able to install the bromolow-7.0.1 image just fine and so far all seems well - did not yet try to add more disks but the controllers are recognized by the kernel (judging from the dmesg-output). So thanks @pocopico for your work!
  3. Und hier nochmal die Treiber aus 3.10.108 für DSM 7.0(.1) auf "synology_bromolow_3615xs". Startup-Script ist auch enthalten; Wenn ihr das Archiv als root auf der DSM nach / entpackt sollte alles direkt in den richtigen Verzeichnissen landen und bein nächsten reboot die Treiber automatisch geladen werden. tar -vtf dddvb_bromolow_7.0.tgz drwxr-xr-x root/root 0 2022-03-16 20:53 lib/modules/dddvb/ -rw-r--r-- root/root 863016 2022-03-16 20:53 lib/modules/dddvb/stv090x.ko -rw-r--r-- root/root 192080 2022-03-16 20:53 lib/modules/dddvb/lnbp21.ko -rw-r--r-- root/root 207744 2022-03-16 20:53 lib/modules/dddvb/stv6110x.ko -rw-r--r-- root/root 434760 2022-03-16 20:53 lib/modules/dddvb/ddbridge.ko -rw-r--r-- root/root 195320 2022-03-16 20:53 lib/modules/dddvb/cxd2099.ko -rw-r--r-- root/root 1495456 2022-03-16 20:53 lib/modules/dddvb/dvb-core.ko -rwxr-xr-x root/root 1327 2022-03-16 20:56 usr/local/etc/rc.d/dddvb_modules.sh dddvb_bromolow_7.0.tgz
  4. Ok - haven't been here in a while - but if someone is still interested: Binary drivers (sorry - can't recall the exact way to build them) at
  5. Ok - ewig her... Leider so lange, dass ich auch keine Anleitung mehr dafür schreiben kann - aber vielleicht bringen jemanden die Binaries und das Start-Script noch etwas. (Siehe Anhang) Läuft auf (uname -a) Linux DiskStation 4.4.59+ #24922 SMP PREEMPT Mon Aug 19 12:13:37 CST 2019 x86_64 GNU/Linux synology_apollolake_918+ mit (lspci | grep dd01) 0000:02:00.0 Class 0480: Device dd01:0003 0000:04:00.0 Class 0480: Device dd01:0003 dd-dvb.tgz
  6. In case someone comes here searching for a solution: I'm running DSM 6.2.2 with 2 CineS2 PCIe cards installed; working flawless with the right kernel drivers and TVHeadend.
  7. Falls jemand noch hier vorbei kommt: Bei mir laufen jetzt 2 DD CineS2 PCIe-Karten ohne Problem auf einem DSM 6.2.2 mit TVHeadhend. Kernel Treiber selbst gebaut; beim Laden der Module muss man auf die Reihenfolge achten.
  8. The 4/8 GB problem might not occur with an older (6.1 uses a 3-series Kernel while 6.2 uses a 4.4 Kernel) - so watch out if you upgrade to DSM 6.2(.2).
  9. Just a short summary on my attempts of running xpenology on an HP Gen10. I used the 918+ 1.04 loader and the latest DSM 6.2.2 image. Install worked without any problems visible initially. Only later I noticed, that the system was only using 4GB of the 8GB of RAM installed (kernel log says due to faulty HP BIOS). DSM operated just fine, network cards (2x 1GBE onboard, Broadcom) were supported out of the box, no addition of e1000e needed. I don't own the system anymore though as I returned it due to the 4 vs. 8GB RAM issue and the fact that it wouldn't work with my PCIe DVB-Card (timing issues on the PCIe-Bus).
×
×
  • Create New...