chrIsYs

Sorry for not answering, was busy the last days. The time I had I used for resetting my NAS. I went with a full wipe! Booted from a Live-Linux, wiped the drives and then I began from zero again. Before and this time again I used DS3617xs 6.1 Jun's Mod V1.02b for this as a boot loader and installed DSM 6.1 again. Only thing changed this time, instead of using a USB-stick as a bootloader, I changed to SD card (was surprised this worked that smooth). Anyway I learned from my errors and the first things I did was to setup a backup admin and of course, activate SSH. Tested SSH and worked. I did the usual setup stuff and for the last few days it just ran and did what it should as a NAS (moving data, streaming music to radio, streaming video to TV...), no problems there. But now of a sudden this changed... I was doing some research regarding my NAS hardware, therefore logged into DSM, everything ok, after some time I wanted to see the performance from the CPU and RAM and was surprised it didn't change in anyway, wanted to open another window within DSM and suddenly -white screen- and the same message as before, page not available! What the heck? Services for Windows were still available, music streaming etc. also no problems, but DSM down. This time I logged into SSH, did some research regarding Linux commands and important services. Using the command synoservicectl etc. Checking the services nginx, DSM and synoscgi. Nginx ok, DSM and synoscgi obviously down, restarting ended with an error. Here some output: So what on earth is this error [0x4000 servicectl_status.c:27] ??? Why did this happen again? It looks exactly like the error before. Since it seemed like I could't get up and running again, I tried a system reboot. But this was unfortunately no help. The only thing changed was, that it now also isn't available for Windows anymore. All the shares are no longer available (like before). Luckily I still could connect via SSH, but I have no clue what to do next. Something seems to be wrong, but I have no idea what. Is it possible that the HP Microserver is not the best hardware for an Xpenology NAS? Did anyone else run into such problems? If I should need to re-setup, I'm thinking of using 6.2 this time, speaking of: Yes I'm only using the internal 2 ports (ILO also over Port 1). And if 6.2 also shouldn't work I might need to give up and go with FreeNAS (which would be kinda sad, I got to like the DSM). I also exported a log from the shell and attached it. Hope to find some way. Best regards and thanks in advance. NAS Log.txt

Ok, I've been troubleshooting today together with a colleague at work (he's Linux administrator) and we weren't able to do anything. The ports are open but we can not get anything. It looks like the HTML entries etc. might have been shuffled and there is nothing to open at the port we go in. No idea where it went and since there is no SSH access available at this point there probably is no other option than reinstalling the DSM. Any suggestions on how to maybe just update? I was thinking of making a new bootloader for 6.2 and then just updating? Any way how to force an update from a state where I can't enter DSM? Or do I have to boot Linux, wipe the discs, then boot loader and install DSM again by using find.synology.com. Should I go with 6.1 again (older and more stable?) or go with 6.2 now?

Unfortunately not, neither find.synology.com nor the Synology Assistant detect a "Synology" device (this has been working before). Now they find just nothing. Yes I do, I also tried to connect with my smartphone from both networks. Tested it also with another computer and I do have the same errors. One more problem appeared, it does not work correctly as a NAS. It does show all the shares, but when trying to open them it gives an error. An attached USB-HDD does also appear and can be accessed. The NAS is definitely in the network and working, but it blocks everything now... I assumed under branded any major company like HP in this case. Wrong interpretation?

Hello community, I've set up my very first NAS, a HP Microserver Gen8 and installed Synology 6.1 on it. The last few days I spent doing setup and I'm almost finished. But now I have a problem and hope someone can help me. At first I struggled to make my NAS available from external access and therefore did some settings regarding fixed IP address and DDNS etc., still got problems here but that is not the point for now. My main problem now is, that I had the private IP address 192.168.178.100 (for Ethernet-Port 1) set on my router (FritzBox 7430), later because of DDNS settings it also got static on the NAS. Because that IP address is within DHCP range, I wanted to change the IP address to 192.168.178.15, unfortunately I was extremely stupid for a few seconds and first did this change on the router!!! Even though I tried to immediately update the NAS too (router said this action takes effect after restarting the device), it was already to late, I couldn't connect the DSM anymore. So I tried to undo my last router change, and changed the IP address back to 192.168.178.100, but no success, still not possible to access the DSM. I did some restarts, changed the LAN port. Also tried to access via different network on Ethernet-Port 2, but that one also seems to be blocked. I also restarted the router, deleted any information set on the router and let the device re register, but nothing changes. I always get the same Synology error saying "Sorry accessing page is not available". Funny fact, when doing a ping it answers correctly, doing telnet on the IP address with port 5000 I get a "connection refused". (regarding first mentioned problem from external access, I always got refused to even though portforwarding was set on the router, so I am wondering if the NAS itself blocked and not some firewall...) I'm out of ideas now. I have no clue what to do next. My last resort would have been by connecting with Linux and SSH, but since of security reasons I still didn't want to make this available, so this option is blocked at the moment. What the heck could I do now? I just can't understand the problem. Why isn't it possible to connect to the DSM after changing back to the old IP address? All shares etc. are still available, as a NAS it works atm, but I'm not able to do any administration anymore. Usually at this point I would go into ILO and do some work local, but in this case I can not see anything. I don't even have a idea how to reinstall or whatever without wiping the drives... I hope there is someone with an idea because I'm kinda lost now. Maybe the solution is easy and I'm just not seeing it. Thanks in advance. Best regards