Jump to content
XPEnology Community

Pejcik

Transition Member
 View Profile  See their activity

  • Posts

    7

  • Joined

  • Last visited

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

Pejcik's Achievements

Newbie

Newbie (1/7)

0

Reputation

  1. Pejcik
    Now I made new installation after few months but with 1 SSD. 918+ 6.2.2 Results are similar: /$ dd if=/dev/zero bs=2M count=1024 | md5sum 1024+0 records in 1024+0 records out 2147483648 bytes (2.1 GB) copied, 20.6168 s, 104 MB/s /$ dd if=/dev/zero bs=10M count=1024 | md5sum 1024+0 records in 1024+0 records out 10737418240 bytes (11 GB) copied, 80.3615 s, 134 MB/s /$ sudo dd bs=5M count=256 if=/dev/zero of=/volume1/Share918/testx conv=fdatasync 256+0 records in 256+0 records out 1342177280 bytes (1.3 GB) copied, 4.18094 s, 321 MB/s And CPU load is very low during that tests - maybe 17%
  2. Pejcik
    merci. 1) SN - this way I know :D, i fought that maybe exist some webpage with generator 2) it work ! it was not easy - after instalation and reboot it was configuring for long time - more than 10 minutes - and made one extra reboot. Later it worked for some time and during Emby instalation it reboot and once again comming back to live it took 10 or more minutes. I will play with this tomorrow. Maybe hdd is broken or motherboard. I have filling that few month ago I already installed this 918+ on this set. I found my notes with benchmarks but Im not sure ash-4.3# time $(i=0; while (( i < 9999999 )); do (( i ++ )); done) real 1m16.807s user 1m16.687s sys 0m0.014s thank you for help
  3. Pejcik
    tell me please: -how look yours USB setting - UEFI mode, Legacy etc? - Hpet timer ? - sata drive is connected to port 1 ? - where you took SN for 918+ ?
  4. Pejcik
    on Asrock J3455M 6.2.2. is not working on my set even using Intel PRO 1000/PT problem is that I need 4 Sata ports and maybe some PCIE x 4 for intel NIC At this moment from available motherboard is this Asrock J3455M
  5. Pejcik
    do you know what to do with this cpu test ? - to use ram disk?
  6. Pejcik
    hello, thank you very much and I think that this benchmark tool is very useful. I have only problem with CPU test. In my case this if=/dev/zero is on HDD. Speeds are same like with HDD tests. CPU test: piotr@BM-918:/$ dd if=/dev/zero bs=2M count=1024 | md5sum 1024+0 records in 1024+0 records out 2147483648 bytes (2.1 GB) copied, 24.5877 s, 87.3 MB/ HDD test: 2684354560 bytes (2.7 GB) copied, 30.1107 s, 89.1 MB/s Maybe it would be possible to run Geekbench4 directly on Xpenology? Asrock J3455M
×
×
  • Create New...