edie209
-
Posts
15 -
Joined
-
Last visited
Posts posted by edie209
-
-
If I am honest I have made no progress getting usb working, to the point where I think I may have to accept that is the way it is.
-
Thanks @Polanskiman I have got a bit confused by the look of it. I read your referance to the extra module for usb 1.1 in 1.02 and didn't realise the was a different subject
-
On 9/5/2017 at 6:59 AM, Polanskiman said:
It is most probably due to the fact that your UPS is a usb 1.1 and nor DSM or the loader contain the usb 1.1 module. A work around is to plug the UPS into a usb hub and then plug the usb hub into DSM. Jun included that module starting at v1.02.I have tried using Jun's v1.02 for the last two evenings with 3 different USB drives and I keep getting ”Failed to install the file. The file is probably corrupted. (13)"
So I follow your advice and I am 200% positive
" it means your VID and/or PID is wrong. If you are 200% sure that your VID/PID is correct and you still get that error message then try to 'Force Install'."
But there is no Force install option. I have also downloaded the .pat file about 3 times just in case that was the problem. Now I am out of ideas unless I can I edit the grub menu to present a menu to force option?
-
Thanks Polanskiman I tried the update using Jun's 1.01 loader with no success 1.02b has no AMD support from what I have read, however I did manage to use this before my crash. In the end I found this loader https://mega.nz/#!PRIECYqJ!24VjNAOTozWoLlKyKrSngn1ArYT-VPd-1tvlizTDFDU it was created by Jun but then repackaged by Arcao with some extra drivers and that has worked for me. I am now running DSM 6.0.2-8451, I managed to save all my data too, which I am really pleased about.
I might try the standard ramdisk and see what happens
The last issue is getting my UPS to work. its a PowerWalker vi 650va if anyone has any suggestions.
-
Just an update I tried the update using Jun's 1.01 loader with no success 1.02b has no AMD support from what I have read. In the end I found this loader https://mega.nz/#!PRIECYqJ!24VjNAOTozWoLlKyKrSngn1ArYT-VPd-1tvlizTDFDU it created done by Jun but repackaged by Arcao with some extra drivers and that has worked for me.
The last issue is getting my UPS to work.
-
I have a HP NL40 running DSM 5.0-4493 I am able to upgrade to DSM 5.2 and all goes well.
However I have followed your tutorial 3 times now and I can't get jun v1.01 boot loader to work, when I select the 4th option for AMD, then I am just not able to see my NL40 via synology assistant. Do you have any suggestions?
-
Update
it was an AMD processor even though it was reporting to be an Intel i3 in the system info. After messing around last night I got to a point where the system was always in a recover state on every reboot. I did however still have a USB with a nanoboot version of DSM 5 so I have done a clean install and at present I am on DSM 4.4493
Am I right in thinking that I can get back to DSM 6.01 and be stable? can anyone offer any suggestions before I make my next move.
-
Thanks I will try this tonight
@sbv3000 I tried on a different PC and it was ok so must be microserver issue like @nemesis122 has described
-
Hi nemessis122 thanks for the reply could I ask you to elaborate on this please
-
I will try that tonight when I get home, and report back here, thanks
-
Thanks for the reply
I have already checked this and it is defaulting to the install menu (1st option)
-
thanks for the reply, I am quite new to this, is the grub menu the menu I can edit on boot by pressing E? If so this is it.
if so this is the menu
Set img =
savedefault
loadlinux 3615 usb
loadinitrd
showtips
-
I am running DS3615xs DSM 6.1.3-15152,using Jun's Mod v1.02b everything was working perfectly and I had a power outage (and no ups) on reboot once power was restored my HP Microserver would not boot back in to synology. However if I use the reinstall, it see the diskstation in a migratable state and everything comes back and is fine, until I reboot then I have to use the reinstall method again.
Am I doing something wrong?
-
I hope someone can help me.
I installed DS3612xs_3202 on a HP Micro server quite a while ago and it has been working flawlessly. I decided to change my room around and powered it down (with usb removed) and on reboot in Synology assistant I get the status "Not Installed". Now I have quite a large amount of photos and Movies on the drives. What do I do next?
Losing config on reboot
in General Installation Questions/Discussions (non-hardware specific)
Posted
I followed everything to the letter but still had the problems and I also tried an install from fresh but I still ended up in the same situation. I think I will try again but life has taken over at the moment so it won't be for a couple weeks.