jukito

But... If I cannot put more than 9 on sataportmap, how can I set to my 10 disks? Now I'm trying to add a nvme disk (connected to pcie), but without success. It's not mandatory this last issue.

With this options y get the same at the moment. Disks from 33 to 40, only 8 disks. I'm playing with this plus other options. EDITED: More info, with these parameters plus this on grub: DiskIdxMap=0C00 SataPortMap=4A SasIdxMap=1 5-12, 8 disks in total DiskIdxMap=0C00 SataPortMap=4C SasIdxMap=1 5-12, 8 disks in total ....... Eureka! DiskIdxMap=0C00 SataPortMap=1A SasIdxMap=1 This works at least!!!!! Thanks @pocopico for the help!!! ^_^

Hi! Another guy trying to make DSM works well. I'm with esxi 6.7. A vm with a sata redpill. And a LSI card with passthrough and 10 disk attached. I'm not able to view all 10 disks. Playing with sataportmap and others options I'm only able to see a max of 8 drives. A resume... Without options: 33-40, 8 disks SataPortMap=2A DiskIdxMap=0B00 3-8, 12 7 disks SataPortMap=1D DiskIdxMap=0C00 2-8, 7 disks SataPortMap=1D DiskIdxMap=000A 2-8, 7 disks SataPortMap=1DD DiskIdxMap=000A0A 2-8, 7 disks SataPortMap=008 DiskIdxMap=0007 Kernel Panic SataPortMap=10A DiskIdxMap=000007 Ask for new install. I install and fail with corrupted file error. Here are a few commands: root@DiskStation:~# lspci -nn 0000:00:00.0 Class [0600]: Device [8086:7190] (rev 01) 0000:00:01.0 Class [0604]: Device [8086:7191] (rev 01) 0000:00:07.0 Class [0601]: Device [8086:7110] (rev 08) 0000:00:07.1 Class [0101]: Device [8086:7111] (rev 01) 0000:00:07.3 Class [0680]: Device [8086:7113] (rev 08) 0000:00:07.7 Class [0880]: Device [15ad:0740] (rev 10) 0000:00:0f.0 Class [0300]: Device [15ad:0405] 0000:00:11.0 Class [0604]: Device [15ad:0790] (rev 02) 0000:00:15.0 Class [0604]: Device [15ad:07a0] (rev 01) 0000:00:15.1 Class [0604]: Device [15ad:07a0] (rev 01) 0000:00:15.2 Class [0604]: Device [15ad:07a0] (rev 01) 0000:00:15.3 Class [0604]: Device [15ad:07a0] (rev 01) 0000:00:15.4 Class [0604]: Device [15ad:07a0] (rev 01) 0000:00:15.5 Class [0604]: Device [15ad:07a0] (rev 01) 0000:00:15.6 Class [0604]: Device [15ad:07a0] (rev 01) 0000:00:15.7 Class [0604]: Device [15ad:07a0] (rev 01) 0000:00:16.0 Class [0604]: Device [15ad:07a0] (rev 01) 0000:00:16.1 Class [0604]: Device [15ad:07a0] (rev 01) 0000:00:16.2 Class [0604]: Device [15ad:07a0] (rev 01) 0000:00:16.3 Class [0604]: Device [15ad:07a0] (rev 01) 0000:00:16.4 Class [0604]: Device [15ad:07a0] (rev 01) 0000:00:16.5 Class [0604]: Device [15ad:07a0] (rev 01) 0000:00:16.6 Class [0604]: Device [15ad:07a0] (rev 01) 0000:00:16.7 Class [0604]: Device [15ad:07a0] (rev 01) 0000:00:17.0 Class [0604]: Device [15ad:07a0] (rev 01) 0000:00:17.1 Class [0604]: Device [15ad:07a0] (rev 01) 0000:00:17.2 Class [0604]: Device [15ad:07a0] (rev 01) 0000:00:17.3 Class [0604]: Device [15ad:07a0] (rev 01) 0000:00:17.4 Class [0604]: Device [15ad:07a0] (rev 01) 0000:00:17.5 Class [0604]: Device [15ad:07a0] (rev 01) 0000:00:17.6 Class [0604]: Device [15ad:07a0] (rev 01) 0000:00:17.7 Class [0604]: Device [15ad:07a0] (rev 01) 0000:00:18.0 Class [0604]: Device [15ad:07a0] (rev 01) 0000:00:18.1 Class [0604]: Device [15ad:07a0] (rev 01) 0000:00:18.2 Class [0604]: Device [15ad:07a0] (rev 01) 0000:00:18.3 Class [0604]: Device [15ad:07a0] (rev 01) 0000:00:18.4 Class [0604]: Device [15ad:07a0] (rev 01) 0000:00:18.5 Class [0604]: Device [15ad:07a0] (rev 01) 0000:00:18.6 Class [0604]: Device [15ad:07a0] (rev 01) 0000:00:18.7 Class [0604]: Device [15ad:07a0] (rev 01) 0000:02:00.0 Class [0c03]: Device [15ad:0774] 0000:02:01.0 Class [0c03]: Device [15ad:0770] 0000:02:03.0 Class [0106]: Device [15ad:07e0] 0000:03:00.0 Class [0107]: Device [1000:0072] (rev 03) 0000:0b:00.0 Class [0200]: Device [15ad:07b0] (rev 01) 0000:13:00.0 Class [0107]: Device [15ad:07c0] (rev 02) 0001:07:00.0 Class [0106]: Device [1b4b:9235] (rev 11) 0001:08:00.0 Class [0106]: Device [1b4b:9235] (rev 11) 0001:09:00.0 Class [0106]: Device [1b4b:9235] (rev 11) 0001:0a:00.0 Class [0106]: Device [1b4b:9235] (rev 11) Without options: [ 0.000000] Command line: BOOT_IMAGE=/zImage mac1=xxxxxxxxx netif_num=1 earlycon=uart8250,io,0x3f8,115200n8 syno_hdd_powerup_seq=0 vid=0x058f synoboot_satadom=1 syno_hdd_detect=0 pid=0x6387 console=ttyS0,115200n8 elevator=elevator sn=xxxxxxxxxxxx root=/dev/md0 earlyprintk loglevel=15 log_buf_len=32M syno_port_thaw=1 HddHotplug=0 withefi syno_hw_version=DS3615xs vender_format_version=2 Thaaaanks a lot!

Sure, but useful for testing.

Try this: https://github.com/RedPill-TTG/redpill-lkm/issues/14#issuecomment-903683483

Hi! I'm trying to compile redpill-lkm I already downloaded the syno source (x64 because I want to run on ESXi, is it right?) Now I'm trying to run the command that de instructions said: make oldconfig ; make modules_prepare But: cc1: error: code model kernel does not support PIC mode make[1]: *** [/home/david/redpill/redpill-lkm/linux-3.10.x/./Kbuild:36: kernel/bounds.s] Error 1 make: *** [Makefile:840: prepare0] Error 2 Any hint? Thanks a lot!

Any help with this? Thanks a lot!

Hi all! Anybody can help me with this? Scenario: ESXi 6 on Gen8 DSM6 image from ESXi from first post Ok, all is running properly, but when I add another net card, the system crash. BUT the first time when I added the net card all work properly, only get a kernel panic after change the IP of the second net card. I tried deleting and generating the ifcfg-eth* files of the path /etc/sysconfig/network-scripts/ and many other test, but the system only work again when I delete de second net card. Here ir the output from the terminal, all the help are welcome and thank's all: Booting `Synology DS3615xs' error: no suitable video mode found. Booting in blind mode early console in decompress_kernel Decompressing Linux... Parsing ELF... done. Booting the kernel. [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.10.77 (root@build1) (gcc version 4.9.3 20150311 (prerelease) (crosstool-NG 1.20.0) ) #8451 SMP Wed Aug 17 05:12:41 CST 2016 [ 0.000000] Command line: BOOT_IMAGE=(hd0,gpt1)/grub/../image/DS3615xs/zImage root=/dev/md0 syno_hdd_powerup_seq=0 netif_num=1 HddHotplug=0 syno_hw_version=DS3615xs vender_format_version=2 vid=0x0781 pid=0x5581 console=uart,io,0x3f8,115200n8 sn=C7LWN09761 mac1=0011322CA785 withefi elevator=your_magic_elevator quiet SataPortMap=4 synoboot_satadom=1 sata_uid=1 sata_pcislot=5 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] Disabled fast string operations [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003fb25fff] usable [ 0.000000] BIOS-e820: [mem 0x000000003fb26000-0x000000003fb45fff] type 20 [ 0.000000] BIOS-e820: [mem 0x000000003fb46000-0x000000003fb95fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000003fb96000-0x000000003fbb1fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000003fbb2000-0x000000003fbb5fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000003fbb6000-0x000000003fffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffc17fff] reserved [ 0.000000] Early serial console at I/O port 0x3f8 (options '115200n') [ 0.000000] bootconsole [uart0] enabled START /linuxrc.syno Insert basic USB modules... :: Loading module usb-common ... [ OK ] :: Loading module usbcore ... [ OK ] :: Loading module ehci-hcd ... [ OK ] :: Loading module ehci-pci ... [ OK ] :: Loading module uhci-hcd ... [ OK ] :: Loading module xhci-hcd ... [ OK ] :: Loading module etxhci-hcd ... [ OK ] :: Loading module BusLogic ... [ OK ] :: Loading module vmw_pvscsi ... [ OK ] :: Loading module megaraid_mm ... [ OK ] :: Loading module megaraid_mbox ... [ OK ] :: Loading module megaraid ... [ OK ] :: Loading module megaraid_sas ... [ OK ] :: Loading module scsi_transport_spi ... [ OK ] :: Loading module mptbase ... [ OK ] :: Loading module mptscsih ... [ OK ] :: Loading module mptspi ... [ OK ] :: Loading module mptsas ... [ OK ] :: Loading module mptctl ... [ OK ] Insert net driver(Mindspeed only)... Starting /usr/syno/bin/synocfgen... /usr/syno/bin/synocfgen returns 0 [ 5.159217] md: invalid raid superblock magic on sde5 [ 5.174367] md: invalid raid superblock magic on sdf5 [ 5.190398] md: invalid raid superblock magic on sdg5 [ 5.206278] md: invalid raid superblock magic on sdh5 [ 9.006325] md: invalid raid superblock magic on sdi3 Partition Version=8 /sbin/e2fsck exists, checking /dev/md0... 1.42.6-5644: recovering journal 29742 inodes used (19.11%, out of 155648) 98 non-contiguous files (0.3%) 12 non-contiguous directories (0.0%) # of inodes with ind/dind/tind blocks: 0/0/0 Extent depth histogram: 26978/41 259577 blocks used (41.70%, out of 622544) 0 bad blocks 1 large file 23596 regular files 3094 directories 2 character device files 0 block device files 0 fifos 1315 links 3041 symbolic links (2713 fast symbolic links) 0 sockets ------------ 31048 files /sbin/e2fsck returns 1 Mounting /dev/md0 /tmpRoot ------------upgrade Begin upgrade procedure No upgrade file exists End upgrade procedure ============upgrade Wait 2 seconds for synology manufactory device Thr Oct 13 21:27:12 UTC 2016 /dev/md0 /tmpRoot ext4 rw,relatime,journal_checksum,data=ordered 0 0 none /sys/kernel/debug debugfs rw,relatime 0 0 sys /sys sysfs rw,relatime 0 0 none /dev devtmpfs rw,relatime,size=506736k,nr_inodes=126684,mode=755 0 0 proc /proc proc rw,relatime 0 0 linuxrc.syno executed successfully. Post init ==================== start udevd ==================== ===== trigger device plug event ===== [ 190.859178] ------------[ cut here ]------------ [ 190.859954] kernel BUG at /linux/synology/linux-stable/drivers/net/vmxnet3/vmxnet3_drv.c:1314! [ 190.861274] invalid opcode: 0000 [#1] SMP [ 190.861954] Modules linked in: bromolow_synobios(PO) adt7475 i2c_i801 vmxnet3 r8169 pcnet32 e1000 sfc netxen_nic qlge qlcnic qla3xxx pch_gbe ptp_pch sky2 skge jme ipg tg3 cnic uio bnx2 alx atl1c atl1e atl1 libphy mii btrfs synoacl_vfs(PO) zlib_deflate hfsplus md4 hmac bnx2x(O) libcrc32c mdio mlx4_en(O) mlx4_core(O) mlx_compat(O) compat(O) tn40xx(O) i40e(O) ixgbe(O) be2net(O) igb(O) i2c_algo_bit e1000e(O) dca fuse vfat fat crc32c_intel aesni_intel glue_helper lrw gf128mul ablk_helper arc4 cryptd ecryptfs sha512_generic sha256_generic sha1_generic ecb aes_x86_64 authenc des_generic ansi_cprng cts md5 cbc cpufreq_conservative cpufreq_powersave cpufreq_performance cpufreq_ondemand mperf processor thermal_sys cpufreq_stats freq_table dm_snapshot crc_itu_t crc_ccitt quota_v2 quota_tree psnap p8022 llc sit tunnel4 ip_tunnel ipv6 zram(C) sg mptctl mptsas mptspi mptscsih mptbase scsi_transport_spi megaraid_sas megaraid megaraid_mbox megaraid_mm vmw_pvscsi BusLogic etxhci_hcd xhci_hcd uhci_hcd ehci_pci ehci_hcd usbcore usb_common el000(O) [last unloaded: i2c_i801] [ 190.879265] CPU: 1 PID: 9498 Comm: avahi-daemon Tainted: P C O 3.10.77 #8451 [ 190.880496] Hardware name: VMware, Inc. VMware7,1/440BX Desktop Reference Platform, BIOS VMW71.00V.0.B64.1506250318 06/25/2015 [ 190.882314] task: ffff88003f1b40c0 ti: ffff88003e954000 task.ti: ffff88003e954000 [ 190.883530] RIP: 0010:[] [] vmxnet3_rq_rx_complete+0x500/0x870 [vmxnet3] [ 190.885112] RSP: 0000:ffff88003d283e30 EFLAGS: 00010246 [ 190.885964] RAX: 0000000000000000 RBX: ffff8800370b72c0 RCX: ffff880031db4010 [ 190.887099] RDX: 0000000000000120 RSI: 0000000000000002 RDI: 000000000000011e [ 190.888218] RBP: ffff8800370b72c0 R08: 0000000000000000 R09: 0000000000000001 [ 190.889350] R10: ffff8800370b6700 R11: 0000000000000040 R12: ffff880031dbc000 [ 190.890472] R13: ffff880031e89180 R14: ffff880031c04000 R15: 0000000000000000 [ 190.891588] FS: 00007fd40bb8c700(0000) GS:ffff88003d280000(0000) knlGS:0000000000000000 [ 190.892851] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 190.893758] CR2: 0000000000648048 CR3: 000000003f198000 CR4: 00000000001407e0 [ 190.894888] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 190.896029] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 190.897184] Stack: [ 190.897526] 000088003ac48bc0 0000004000000000 ffff8800370b72e0 ffff8800370b6700 [ 190.898784] ffff8800370b6700 ffff8800370b6700 ffff8800370b72e0 0000000000000040 [ 190.900056] ffff8800370b72c0 00000000fffe545a ffff88003d2910d0 ffffffffa096abb0 [ 190.901346] Call Trace: [ 190.901746] [ 190.902066] [] ? vmxnet3_poll_rx_only+0x30/0xa0 [vmxnet3] [ 190.903237] [] ? __netif_receive_skb_core+0x422/0x5e0 [ 190.904277] [] ? net_rx_action+0xf9/0x160 [ 190.905164] [] ? __do_softirq+0xc6/0x1a0 [ 190.906061] [] ? call_softirq+0x1c/0x30 [ 190.906934] [] ? do_softirq+0x35/0x70 [ 190.907772] [] ? irq_exit+0x95/0xa0 [ 190.908562] [] ? do_IRQ+0x49/0xb0 [ 190.909336] [] ? common_interrupt+0x6a/0x6a [ 190.910227] [ 190.910562] [] ? system_call_fastpath+0x16/0x1b [ 190.911542] Code: 00 00 48 8b 7c 24 10 4c 89 ee e8 fc e6 a7 e0 4c 8b 54 24 18 48 c7 85 d0 00 00 00 00 00 00 00 45 31 c0 e9 2d fc ff ff 0f 1f 40 00 <0f> 0b 66 0f 1f 44 00 00 0f 0b 66 0f 1f 44 00 00 3b 85 e4 00 00 [ 190.915894] RIP [] vmxnet3_rq_rx_complete+0x500/0x870 [vmxnet3] [ 190.917097] RSP [ 190.917658] ---[ end trace 87837954e5d25554 ]--- [ 190.918342] Kernel panic - not syncing: Fatal exception in interrupt [ 190.919399] Rebooting in 3 seconds..

Does anyone has tried with ESXi and passthrough with the HP Dynamic Smart Array B120i of the Microserver Gen8 Thanks!!!!!