Jump to content
XPEnology Community

ahakobyan

Rookie
  • Posts

    8
  • Joined

  • Last visited

Everything posted by ahakobyan

  1. Я конечно извиняюсь. видимо я тупой. 1. Файл с расширением .pat я никак не смог открыть никаким из доступных архиваторов. Назовите пожалуйста именно какой архиватор его может раскрыть? 2. Я так понял после того как я скачал нужный .pat файл, его надо открыть архиватором, скопировать все файлы в отдельную папку на рабочем столе. С этого момента уже не понятно, что именно я должен монтировать, 1ый раздел какого именно файла, раскрытого .pat файла или другово файла внутри папки, или всетаки тот же файл который по интрукции был отматирован, тоесть "synoboot"? Я пытался черес osfmount монтировать .pat файл, но он ничего не открывает. Я буду очень благодарен если вы можете описать детально шаги для обновления этого файла. Файл я уже скачал, я никак просто не могу понять имено куда его вставить и как. Спасибо.
  2. I was trying to figure this out myself. Tried different loaders, different versions. Seem to be getting stuck with the same issue. I'm able to prepare the USB drive, and load it, but I'm unable to find it both by using the Synology Assistant, and find.synology.com page. I even tried accessing the IP with :5000 port. Nothing. Here are the details of my hardware. I'm at a point where I think a more experienced someone could maybe suggest an exact loader or a version of files to use to complete the install. I don't care if I'll be able to update the system afterwards. I just want to install xpenology on this pc. Please see attached images for the hardware data. Thank you!
  3. Спасибо за быстрый ответ. Я попытался проследить инструцкии по линку, все вроде четко и детально описанно, но вот какраз часть с заменой этого файла описана абсолютно не понятно и оторванно от процесса както. """""""""""""""""""""""""""""""""""""""""""""""""""""" После чего сохраняем и отмонтируем кнопкой Dismount. Загружаем прошивку системы в виде DSM_DS3617xs_24922.pat Теперь монтируем 1й раздел с правами на запись. В корне должно находиться 3 файла: extra.lzma, rd.gz, zImage Файлы rd.gz, zImage заменяем из загруженного образа системы. Расширение pat можно открыть обычным архиватором. extra.lzma заменяем из загруженного ранее extra.lzma for loader 1.03b_mod ds3617 DSM 6.2.2 v0.5_test После чего жмем Dismount all & Exit Запись образа на флешку """"""""""""""""""""""""""""""""""""""""""""""""""""" Вообще не понятно куда загружаем прошивку , как и где монтируем 1й раздел с правами на запись... и где именно меняем эти файлы... Если вы понимаете о чем тут говориться, пожалуйста дайте знать.. Спасибо.
  4. Я понимаю что это было более года назад, но я сейчас мучаюсь с похожей проблемой. У меня та же самая материнка, я хочу понять имено какую версию я могу поставить на нее чтоб работала, даже если потом не будут возможны обновляния. Вы не могли бы мне помочь понять что это за файл который надо заменить и с чем? Спасибо!
  5. I gave up on the latest version and just installed one of the working old versions. don't even remember which it was.
  6. If this isn't the best section of the forum to post my issue in, I'm am truly sorry, and I'd appreciate if my post is moved to the right place instead of being removed. I'll try to keep the post short... I'm trying to install latest possible version of Synology app on my custom built setup, which includes following parts: MOBO: Intel® Desktop Board DQ77KB CPU: Intel i5 3570s Quad Core 3.10 Ghz LGA RAM: 12 GB DDR3 (upgradable to 16gb) HDD: 8 x 2 TB SAS drives. PSU: External DELL 240watt(12.5amp) Power Supply LSI Card: Dell LSI SAS 9217-8i Host Bus Adapter RAID Parts and setup is close to the one found here: https://forums.servethehome.com/index.php?threads/u-nas-810-intel-dq77kb-i7-3770s-synology-diy-build-1-0.20601/ I tried to repeat every step of installation process described in that post, but still unable to see locate using Synology helper or the web page. I tried different loaders and DSM versions. Only once i was able to install, but back then my LSI card setup wasn't complete, and not all the drives were visible. After I changed the settings, and tried to install newer versions of Synology app, i'm unable to find it in Synology helper. The motherboard has 2 NICs, I enter both MAC addresses, and I tried connecting with both and each separately, nothing seems to work. Please let me know if more info is needed to point me to the right direction, and if not, please let me know which loader I should use? Any help is greatly appreciated.
  7. ahakobyan

    DSM 6.2 Loader

    Thank you @Olegin So from what I understand I should use the 1.03 loader with DS3615, but I can't seem to be able to find 1.03b download link. I'm not sure if I get the right info from that table.
  8. ahakobyan

    DSM 6.2 Loader

    My setup: CPU: Intel i5 3570s Quad Core 3.10 RAM: 12 SO-DIMM DDR3 1600 MOBO: Intel DQ77KB HDDs: 8x Seagate 2TB SAS drives SAScard: Dell LSI SAS 9217-8i PSU: 12.3amps Dell 1. I downloaded the loader 2. Updated synoboot.img file as per instructions (vid, pid, sn, mac1, mac2), using OSFMount (SN generator for DS3615xs) 3. Made a bootable USB, tried using Rufus & Etcher 4. Booted from USB. I get the screen 5. After this, I can't see the NAS using both find.synology.com or Synology Assistant. I'm not sure what i'm doing wrong but I tried multiple times, I get the same issue every time. it looks like there is no connection to the pc at all. I also tried older loader which starts differently, I think it was "XPEnoboot_DS3615xs_5.2-5565.2.iso", this one works as far as finding the connection, but this doesn't allow me to install latest software. Please let me know what I need to do to make the 6.2 loader work on my system. Thank you!!!
×
×
  • Create New...