altas
-
Posts
161 -
Joined
-
Last visited
Posts posted by altas
-
-
i was asking Aigor to test the migration from existing DSM6 with TS3 server to DSM7..
-
4 hours ago, Aigor said:
Good to know.
Do you know what happens with pkg that doesn't exist in DSM7 but only in DSM6?
I have Ts3serve on my Gen8 DSM6.2.3 DS3617xs, but i don't know what could happen with package installed when i will migrate.from where you have the TS3 Server?? as i can not find it in the Package Center
-
I think it will be deleted.
Let my check if i can go back to Dsm6 to do a test- 1
-
That is a good question, i dont know.
- 1
-
the remaining challenge is to be sure you have a working tinycore loader befor start migration.
and for that you have to play arround with the current working NAS or you have a similar Device.
or remove all HDDs from the current Setup and use a empty/clean HDD to prepair the tinyloader and rollback to the working setup with the HDDS to start then the migration process
-
cool thx !
so then i can confirm that my Test migration from DS3617xs to DS3622xs+ was successfully (Baremetal)
i used 1 HDD with some Test Data and everything was still available.
Steps i did
1. block internet to DS3617xs
2 turn off the DS
3 switch the Loader (USB Stick)
4 Boot up and wait until the DS come up and reachable in the Network (ping)
5 use the pat file from the tinyloader and start migration, i used the Option dont keep settings( 2.Option), maybe someone can use NR1 as test
6 wait until the migration process has reached 100%, then the DS should rest as usual,
7 wait until the DS is back online and you can process with DSM7 Wizard to complet.
- 3
-
so means you bootet the DS3622xs+ VM with the Sata 1:0 from the VM DS3615XS?
for Baremetal test.. boot the DS3615xs installation with the DS3622xs Boot Stick and use the 7.0.1 pat file from the loader.
-
9 hours ago, Orphée said:
Yep, ESXi Gen8.
so you started the Update process with the 7.0.1 pat file on the running DSM 6.2.3 and switched after the reboot to Tinyloader ?
or what was the successfully way?
-
Then use the same vid/pid
But i am not sure if already one was successfully with SD Card boot- 1
-
Can the bootloader run from a SD card? When I run ./rploader.sh identifyusb now, system can't find vid and pid of the SD I'm booting from [emoji848]
Use USB or Sata (esxi) -
54 minutes ago, cferra said:
An IT mode adapter preferable or can you configure your drives as a jbod
good idea.. i switched to AHCI Mode for the onboard B120i Controller, the P222 is limited to use it like this...
-
strange.. i never had any problem to downlod from cndl.. i did it right now.
why not pre-download and but it in the cach Folder ?
-
-
-
And how to configure the HDD??
Each drive on the onboard raid controller as own array? -
For EsXi you dont need PID/VID if you use SATA boot
-
It was to play around, as i found this P222 in mY Hardware stuff
But i am not happy with it, will switch back to onboard controller.
Maybe satamap are wrong, but i am not able to create volumes after i add more than 2 Disks
They stay on status Dedected.
Not sure what is better hardware raid or let DSM manage it. -
-
but i need it for Broadwell ds3622xs+
edit: got it
-
ah ok need to test
i only had the shutdown/Reboot stuck in DSM for Barmetal and Gen8will give it a try later
-
-
31 minutes ago, p33ps said:
Hey, can you please explain what build did you use to get it working in HP Gen8?
use the Tinyloader to create the Image.
its not needed to add the extension for acpid, mine was working without. -
lspci -tnnvq -[0000:00]-+-00.0 Intel Corporation Xeon E3-1200 v2/Ivy Bridge DRAM Controller [8086:0158] +-01.0-[07]----00.0 Hewlett-Packard Company Smart Array Gen8 Controllers [103c:323b] +-06.0-[02]----00.0 Hewlett Packard Enterprise Device [1590:005f] +-1a.0 Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] +-1c.0-[0d]-- +-1c.4-[03]--+-00.0 Broadcom Limited NetXtreme BCM5720 Gigabit Ethernet PCIe [14e4:165f] | \-00.1 Broadcom Limited NetXtreme BCM5720 Gigabit Ethernet PCIe [14e4:165f] +-1c.6-[04]----00.0 Renesas Technology Corp. uPD720201 USB 3.0 Host Controller [1912:0014] +-1c.7-[01]--+-00.0 Hewlett-Packard Company Integrated Lights-Out Standard Slave Instrumentation & System Support [103c:3306] | +-00.1 Matrox Electronics Systems Ltd. MGA G200EH [102b:0533] | +-00.2 Hewlett-Packard Company Integrated Lights-Out Standard Management Processor Support and Messaging [103c:3307] | \-00.4 Hewlett-Packard Company Integrated Lights-Out Standard Virtual USB Controller [103c:3300] +-1d.0 Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] +-1e.0-[14]-- +-1f.0 Intel Corporation C204 Chipset Family LPC Controller [8086:1c54] \-1f.2 Intel Corporation 6 Series/C200 Series Chipset Family SATA RAID Controller [8086:1c04]
-
any recommendation what extension to use for HP P222 SAS Card?
TinyCore RedPill Loader (TCRP)
in Loaders
Posted
but for that i need the source of the TS3 PAckage