Barbapapa

@bearcat dont know what i did but right now I can see the controller and drive while booting. its also possible to enter the raid bios, I have only 1 disk attached jbod so there is no raid configured. the sil3132 is indeed a raid controller but i thought this should be no problem as what i have seen on the compatibility list. dont know if it is possible to reflash it to a nonraid controller. now i see it while booting I went into the grub loader and used the following command Appandix SataPortMap=62 (6 for the onboard en 2 for the controller after the command i pressed esc and did a baremetal start but without succes.

@bearcat my chipset H110 only support AHCI so this is the default setting (no other option possible) I use the following bootloader and DSM version: DS3615XS V6.1 Baremetal Jun's Mod V1.02B DSM 6.1.4-15217 dont know if it is because the chipset is very limited but when I go into my Bios I cant select a drive thats connected with my pci-e satacontroller those are not visible when I go to harddisks.

Hi, I have problems getting my pci-e sata controller working. I checked the hardware supported list and the Sil 3132controller should be compatible. After installing it the drives are not recognizes. I already tried to change the grub satamapping to 62 (6onboardsataports and 2 on the external card) but this is not working. Anybody that can help me ? for the record after installing the card a new reinstall is not necessary right ?